[Fri Jul 13 07:46:21 2012] Detection parameters:
  Position = (256.4, 367.3) = 23 31 59.38 -55 40 38.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.6 +/- 14.2
  Background counts = 3.5
  Rate = 0.02 +/- 0.002

[Fri Jul 13 07:46:21 2012] Off-axis axis estimate = 5.85'
[Fri Jul 13 08:18:32 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 08:18:32 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Fri Jul 13 08:18:32 2012] source mask rpix=2.1, npix_max = 28, mask sum = 25, frac = 0.890
[Fri Jul 13 08:18:32 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.35"
[Fri Jul 13 08:36:39 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jul 13 08:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src2.csv
[Fri Jul 13 08:36:39 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jul 13 08:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src2.csv
[Fri Jul 13 08:36:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 08:36:39 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jul 13 08:36:39 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jul 13 08:36:39 2012] Fit fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jul 13 08:36:47 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.360953 pixels away
[Fri Jul 13 08:36:47 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 08:36:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 08:36:47 2012] Assessing source extent using major
[Fri Jul 13 08:36:47 2012] Source does appear to be extended
[Fri Jul 13 08:36:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 09:06:48 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 09:06:48 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Fri Jul 13 09:06:48 2012] source mask rpix=2.1, npix_max = 28, mask sum = 25, frac = 0.890
[Fri Jul 13 09:06:48 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.35"
[Fri Jul 13 09:25:09 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jul 13 09:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src2.csv
[Fri Jul 13 09:25:09 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jul 13 09:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src2.csv
[Fri Jul 13 09:25:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 09:25:09 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jul 13 09:25:09 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jul 13 09:25:09 2012] Fit fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jul 13 09:25:18 2012] Spatial fit model total counts = 158.000000, observed total counts = 158.000000
[Fri Jul 13 09:25:18 2012] Offset between fit and detection position for source 2 = 0.176566 pixels
[Fri Jul 13 09:25:18 2012] 160.686700 total counts/ 65.419000 bgd. counts: snr = 11.778602
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.176566 pixels
  Position = (256.3, 367.4) = 23 31 59.43 -55 40 39.4
  Extent = 6.0 (5.2-7.2)", rotation angle = 0
  Source counts = 95.3 +/- 12.7
  Background counts = 65.4
  Rate = 0.009 +/- 0.001
[Fri Jul 13 09:25:18 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 09:25:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 09:25:18 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 09:25:18 2012] Source does appear to be extended
[Fri Jul 13 09:25:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 09:50:12 2012] XMMSAS src. selection expression = ellipse(22252.028400, 31918.428000, 361.302010, 361.302010, 0.000000, X, Y)
[Fri Jul 13 09:50:12 2012] Writing source region out to fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul 13 09:50:12 2012] Extracting stamp from image fullrun_mos2_xmm0505381101_pi300-10000_cl_sm2.00.img.gz, (236, 347) - (277, 388)
[Fri Jul 13 09:50:12 2012] XMMSAS bgd. selection expression = annulus(22252.028400, 31918.428000, 602.170017, 1204.340035, X, Y)
[Fri Jul 13 09:50:12 2012] Writing fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src2.gif
[Fri Jul 13 09:50:24 2012] Mean detx,y = (8205.44, -1219.56) 
[Fri Jul 13 09:50:24 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 09:50:32 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 09:50:32 2012] Setting source spectrum file to fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 13 09:50:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul 13 09:56:07 2012] Not generating rmf since there are only 95 counts
[Fri Jul 13 09:56:07 2012] rmf not generated due to insufficient counts
[Fri Jul 13 09:57:43 2012] Updating aperture counts using extracted products
[Fri Jul 13 09:57:44 2012] Error reading totcts from fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 13 09:57:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 09:57:45 2012] Using photon index=1.80, rate=0.00942, arf fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src2.arf
[Fri Jul 13 09:57:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 09:57:45 2012] Updating source flux to 1.8e-13
[Fri Jul 13 09:58:00 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting