[Fri Jul 13 07:46:21 2012] Detection parameters:
  Position = (329.8, 160.1) = 23 31 21.51 -55 55 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.1 +/- 10.3
  Background counts = 3.9
  Rate = 0.01 +/- 0.002

[Fri Jul 13 07:46:21 2012] Off-axis axis estimate = 10.29'
[Fri Jul 13 08:18:32 2012] Using EEF radius (= 11.57 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 08:18:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 13 08:18:32 2012] Initial guess for spatial extent in simple fitting = 11.57"
[Fri Jul 13 08:18:32 2012] source mask rpix=2.7, npix_max = 39, mask sum = 34, frac = 0.851
[Fri Jul 13 08:18:32 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.57"
[Fri Jul 13 08:36:39 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jul 13 08:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src3.csv
[Fri Jul 13 08:36:39 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jul 13 08:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src3.csv
[Fri Jul 13 08:36:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 08:36:39 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 13 08:36:39 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 13 08:36:39 2012] Fit fullrun_mos2_xmm0505381101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul 13 08:36:47 2012] Spatial fit model total counts = 89.636400, observed total counts = 82.000000
[Fri Jul 13 08:36:47 2012] Offset between fit and detection position for source 15 = 0.065736 pixels
[Fri Jul 13 08:36:47 2012] 90.042900 total counts/ 34.210300 bgd. counts: snr = 9.545736
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.065736 pixels
  Position = (329.9, 160.1) = 23 31 21.48 -55 55 41.4
  Extent = 5.7 (4.3-7.5)", rotation angle = 0
  Source counts = 55.8 +/- 9.5
  Background counts = 34.2
  Rate = 0.006 +/- 0.0009
[Fri Jul 13 08:36:47 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 08:36:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 08:36:47 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 08:36:47 2012] Source does appear to be extended
[Fri Jul 13 08:36:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 09:06:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 09:06:48 2012] Initial guess for spatial extent in simple fitting = 5.74"
[Fri Jul 13 09:06:48 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.208
[Fri Jul 13 09:06:48 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.74"
[Fri Jul 13 09:25:09 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 13 09:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src3.csv
[Fri Jul 13 09:25:09 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 13 09:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src3.csv
[Fri Jul 13 09:25:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 09:25:09 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 13 09:25:09 2012] fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 13 09:25:09 2012] Fit fullrun_mos2_xmm0505381101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul 13 09:25:18 2012] Spatial fit model total counts = 88.152100, observed total counts = 82.000000
[Fri Jul 13 09:25:18 2012] Offset between fit and detection position for source 15 = 0.032470 pixels
[Fri Jul 13 09:25:18 2012] 88.568100 total counts/ 33.228000 bgd. counts: snr = 9.600367
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.032470 pixels
  Position = (329.9, 160.1) = 23 31 21.48 -55 55 41.3
  Extent = 5.9 (4.4-7.5)", rotation angle = 0
  Source counts = 55.3 +/- 9.4
  Background counts = 33.2
  Rate = 0.005 +/- 0.0009
[Fri Jul 13 09:25:18 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 09:25:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 09:25:18 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 09:25:18 2012] Source does appear to be extended
[Fri Jul 13 09:25:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 09:50:12 2012] XMMSAS src. selection expression = ellipse(28653.845600, 13882.272600, 351.411610, 351.411610, 0.000000, X, Y)
[Fri Jul 13 09:50:12 2012] Writing source region out to fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src15_src.reg
[Fri Jul 13 09:50:12 2012] Extracting stamp from image fullrun_mos2_xmm0505381101_pi300-10000_cl_sm2.00.img.gz, (310, 140) - (350, 180)
[Fri Jul 13 09:50:12 2012] XMMSAS bgd. selection expression = annulus(28653.845600, 13882.272600, 585.686017, 1171.372034, X, Y)
[Fri Jul 13 09:50:12 2012] Writing fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src15.gif
[Fri Jul 13 09:50:34 2012] Mean detx,y = (-10252.77, -6240.32) 
[Fri Jul 13 09:50:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 09:50:42 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 09:50:43 2012] Setting source spectrum file to fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jul 13 09:50:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri Jul 13 09:56:12 2012] Not generating rmf since there are only 55 counts
[Fri Jul 13 09:56:12 2012] rmf not generated due to insufficient counts
[Fri Jul 13 09:57:44 2012] Updating aperture counts using extracted products
[Fri Jul 13 09:57:44 2012] Error reading totcts from fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jul 13 09:57:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 09:57:45 2012] Using photon index=1.80, rate=0.00547, arf fullrun_mos2_xmm0505381101_pi300-10000_pass1_cl_src15.arf
[Fri Jul 13 09:57:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 09:57:45 2012] Updating source flux to 1.2e-13
[Fri Jul 13 09:58:00 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting