[Fri Jul 13 07:46:06 2012] Detection parameters:
  Position = (356.6, 184.2) = 23 31 7.67 -55 53 56.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.6 +/- 15.7
  Background counts = 4.1
  Rate = 0.03 +/- 0.003

[Fri Jul 13 07:46:06 2012] Off-axis axis estimate = 9.29'
[Fri Jul 13 08:08:30 2012] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 08:08:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 13 08:08:30 2012] Initial guess for spatial extent in simple fitting = 11.07"
[Fri Jul 13 08:08:30 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.970
[Fri Jul 13 08:08:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.07"
[Fri Jul 13 08:18:32 2012] fullrun_mos1_xmm0505381101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 13 08:18:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 08:18:32 2012] fullrun_mos1_xmm0505381101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 13 08:18:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 08:18:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505381101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505381101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 08:18:32 2012] fullrun_mos1_xmm0505381101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 13 08:18:32 2012] fullrun_mos1_xmm0505381101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 13 08:18:32 2012] Fit fullrun_mos1_xmm0505381101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 13 08:36:44 2012] Spatial fit model total counts = 204.394000, observed total counts = 204.000000
[Fri Jul 13 08:36:44 2012] Offset between fit and detection position for source 1 = 0.241038 pixels
[Fri Jul 13 08:36:44 2012] 205.994700 total counts/ 82.759700 bgd. counts: snr = 13.546422
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.241038 pixels
  Position = (356.7, 184.5) = 23 31 7.63 -55 53 55.3
  Extent = 5.9 (4.9-7.0)", rotation angle = 0
  Source counts = 123.2 +/- 14.4
  Background counts = 82.8
  Rate = 0.01 +/- 0.001
[Fri Jul 13 08:36:44 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 08:36:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 08:36:44 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 08:36:44 2012] Source does appear to be extended
[Fri Jul 13 08:36:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 08:56:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 08:56:02 2012] Initial guess for spatial extent in simple fitting = 5.91"
[Fri Jul 13 08:56:02 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.869
[Fri Jul 13 08:56:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.91"
[Fri Jul 13 09:06:47 2012] fullrun_mos1_xmm0505381101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 13 09:06:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 09:06:47 2012] fullrun_mos1_xmm0505381101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 13 09:06:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 09:06:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505381101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505381101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 09:06:47 2012] fullrun_mos1_xmm0505381101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 13 09:06:47 2012] fullrun_mos1_xmm0505381101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 13 09:06:47 2012] Fit fullrun_mos1_xmm0505381101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 13 09:25:16 2012] Spatial fit model total counts = 178.285000, observed total counts = 179.000000
[Fri Jul 13 09:25:16 2012] Offset between fit and detection position for source 1 = 0.029548 pixels
[Fri Jul 13 09:25:16 2012] 180.712000 total counts/ 59.716000 bgd. counts: snr = 15.657617
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.029548 pixels
  Position = (356.7, 184.4) = 23 31 7.65 -55 53 55.4
  Extent = 5.9 (4.6-6.9)", rotation angle = 0
  Source counts = 121.0 +/- 13.4
  Background counts = 59.7
  Rate = 0.01 +/- 0.001
[Fri Jul 13 09:25:16 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 09:25:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 09:25:16 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 09:25:16 2012] Source does appear to be extended
[Fri Jul 13 09:25:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 09:44:43 2012] XMMSAS src. selection expression = ellipse(30982.199200, 15997.675000, 352.030810, 352.030810, 0.000000, X, Y)
[Fri Jul 13 09:44:43 2012] Writing source region out to fullrun_mos1_xmm0505381101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 13 09:44:43 2012] Extracting stamp from image fullrun_mos1_xmm0505381101_pi300-10000_cl_sm2.00.img.gz, (336, 164) - (377, 205)
[Fri Jul 13 09:44:43 2012] XMMSAS bgd. selection expression = annulus(30982.199200, 15997.675000, 586.718017, 1173.436034, X, Y)
[Fri Jul 13 09:44:43 2012] Writing fullrun_mos1_xmm0505381101_pi300-10000_pass1_cl_src1.gif
[Fri Jul 13 09:44:44 2012] Mean detx,y = (-2948.56, 9654.59) 
[Fri Jul 13 09:44:45 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 09:44:51 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 09:44:52 2012] Setting source spectrum file to fullrun_mos1_xmm0505381101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 13 09:44:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505381101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 13 09:57:43 2012] Updating aperture counts using extracted products
[Fri Jul 13 09:57:43 2012] Error reading totcts from fullrun_mos1_xmm0505381101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 13 09:57:43 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 09:57:43 2012] Using photon index=1.80, rate=0.012, arf fullrun_mos1_xmm0505381101_pi300-10000_pass1_cl_src1.arf
[Fri Jul 13 09:57:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 09:57:43 2012] Updating source flux to 2.1e-13
[Fri Jul 13 09:58:00 2012] Reading fit data from xmm0505381101/analysis//spectral/fullrun_mos1_xmm0505381101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 13 09:58:00 2012] Spectral fit parameter nH value = 5.60214e+12
[Fri Jul 13 09:58:00 2012] Spectral fit parameter PhoIndex value = 1.5877
[Fri Jul 13 09:58:00 2012] Failed to get F(0.3-8.0) from xmm0505381101/analysis//spectral/fullrun_mos1_xmm0505381101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 13 09:58:00 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 09:58:00 2012] Using Nh = 5.6e+12, photon index=1.59, rate=0.012, arf fullrun_mos1_xmm0505381101_pi300-10000_pass1_cl_src1.arf
[Fri Jul 13 09:58:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 09:58:00 2012] Updating source flux to 2.3e-13