[Thu Mar 15 11:46:10 2012] Detection parameters:
  Position = (376.3, 440.9) = 23 28 15.31 -55 35 17.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.7 +/- 8.0
  Background counts = 4.8
  Rate = 0.003 +/- 0.0006

[Thu Mar 15 11:46:11 2012] Off-axis axis estimate = 11.77'
[Thu Mar 15 12:57:47 2012] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 12:57:47 2012] Initial guess for spatial extent in simple fitting = 12.31"
[Thu Mar 15 12:57:47 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.946
[Thu Mar 15 12:57:47 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.31"
[Thu Mar 15 13:29:47 2012] fullrun_mos1_xmm0505381001_pi300-10000_cl_pass0_src9.ximg exists
[Thu Mar 15 13:29:47 2012] fullrun_mos1_xmm0505381001_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Mar 15 13:29:47 2012] Fit fullrun_mos1_xmm0505381001_pi300-10000_cl_pass0_src9 appears to have run properly
[Thu Mar 15 13:29:47 2012] fullrun_mos1_xmm0505381001_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Mar 15 13:29:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381001_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Mar 15 13:29:47 2012] fullrun_mos1_xmm0505381001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Mar 15 13:29:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381001_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Mar 15 13:29:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505381001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505381001_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 14:09:33 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.224790 pixels away
[Thu Mar 15 14:09:33 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 14:09:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 14:09:33 2012] Assessing source extent using major
[Thu Mar 15 14:09:33 2012] Source does appear to be extended
[Thu Mar 15 14:09:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 15:09:30 2012] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 15:09:30 2012] Initial guess for spatial extent in simple fitting = 12.31"
[Thu Mar 15 15:09:30 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.946
[Thu Mar 15 15:09:30 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 12.31"
[Thu Mar 15 15:34:12 2012] fullrun_mos1_xmm0505381001_pi300-10000_cl_pass1_src9.ximg exists
[Thu Mar 15 15:34:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381001_pi300-10000_cl_pass1_src9.csv
[Thu Mar 15 15:34:12 2012] fullrun_mos1_xmm0505381001_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Mar 15 15:34:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505381001_pi300-10000_cl_pass1_src9.csv
[Thu Mar 15 15:34:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505381001_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505381001_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 15:34:12 2012] fullrun_mos1_xmm0505381001_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Mar 15 15:34:12 2012] fullrun_mos1_xmm0505381001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Mar 15 15:34:12 2012] Fit fullrun_mos1_xmm0505381001_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Mar 15 16:07:12 2012] Spatial fit model total counts = 94.782100, observed total counts = 86.000000
[Thu Mar 15 16:07:12 2012] Offset between fit and detection position for source 2 = 0.230137 pixels
[Thu Mar 15 16:07:12 2012] 93.513600 total counts/ 67.170700 bgd. counts: snr = 3.214206
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.230137 pixels
  Position = (376.1, 440.9) = 23 28 15.43 -55 35 19.1
  Extent = 4.8 (3.3-6.2)", rotation angle = 0
  Source counts = 26.3 +/- 9.7
  Background counts = 67.2
  Rate = 0.002 +/- 0.0007
[Thu Mar 15 16:07:12 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:07:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:07:12 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 16:07:12 2012] Source does appear to be extended
[Thu Mar 15 16:07:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 16:33:10 2012] XMMSAS src. selection expression = ellipse(32668.777000, 38309.315800, 285.975008, 285.975008, 0.000000, X, Y)
[Thu Mar 15 16:33:10 2012] Writing source region out to fullrun_mos1_xmm0505381001_pi300-10000_pass1_cl_src2_src.reg
[Thu Mar 15 16:33:10 2012] Extracting stamp from image fullrun_mos1_xmm0505381001_pi300-10000_cl_sm2.00.img.gz, (360, 424) - (392, 457)
[Thu Mar 15 16:33:10 2012] XMMSAS bgd. selection expression = annulus(32668.777000, 38309.315800, 476.625014, 953.250027, X, Y)
[Thu Mar 15 16:33:10 2012] Writing fullrun_mos1_xmm0505381001_pi300-10000_pass1_cl_src2.gif
[Thu Mar 15 16:35:52 2012] Mean detx,y = (11308.73, -7481.24) 
[Thu Mar 15 16:35:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 16:36:06 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 16:36:07 2012] Setting source spectrum file to fullrun_mos1_xmm0505381001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar 15 16:36:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505381001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Mar 15 16:41:59 2012] Not generating rmf since there are only 26 counts
[Thu Mar 15 16:41:59 2012] rmf not generated due to insufficient counts
[Thu Mar 15 16:52:52 2012] Updating aperture counts using extracted products
[Thu Mar 15 16:52:52 2012] Error reading totcts from fullrun_mos1_xmm0505381001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar 15 16:52:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 16:52:52 2012] Using photon index=1.80, rate=0.00202, arf fullrun_mos1_xmm0505381001_pi300-10000_pass1_cl_src2.arf
[Thu Mar 15 16:52:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 16:52:52 2012] Updating source flux to 6.1e-14
[Thu Mar 15 16:52:54 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting