[Tue Aug 28 02:47:17 2012] Detection parameters:
  Position = (387.5, 237.0) = 23 25 26.68 -55 50 34.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.4 +/- 10.9
  Background counts = 2.6
  Rate = 0.02 +/- 0.003

[Tue Aug 28 02:47:17 2012] Off-axis axis estimate = 7.85'
[Tue Aug 28 02:53:48 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 02:53:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 28 02:53:48 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Tue Aug 28 02:53:48 2012] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.754
[Tue Aug 28 02:53:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.35"
[Tue Aug 28 02:57:30 2012] fullrun_mos1_xmm0505380901_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 28 02:57:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505380901_pi300-10000_cl_pass0_src1.csv
[Tue Aug 28 02:57:30 2012] fullrun_mos1_xmm0505380901_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 28 02:57:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505380901_pi300-10000_cl_pass0_src1.csv
[Tue Aug 28 02:57:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505380901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505380901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 02:57:30 2012] fullrun_mos1_xmm0505380901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 28 02:57:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505380901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Aug 28 02:57:30 2012] fullrun_mos1_xmm0505380901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 28 02:57:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505380901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Aug 28 02:57:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505380901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505380901_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 03:00:20 2012] Spatial fit model total counts = 81.952200, observed total counts = 97.000000
[Tue Aug 28 03:00:20 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 28 03:00:20 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 03:00:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 03:00:20 2012] Assessing source extent using major
[Tue Aug 28 03:00:20 2012] Source does appear to be extended
[Tue Aug 28 03:00:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 03:07:33 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 03:07:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 28 03:07:33 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Tue Aug 28 03:07:33 2012] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.754
[Tue Aug 28 03:07:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.35"
[Tue Aug 28 03:11:27 2012] fullrun_mos1_xmm0505380901_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 28 03:11:27 2012] fullrun_mos1_xmm0505380901_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 28 03:11:27 2012] Fit fullrun_mos1_xmm0505380901_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Aug 28 03:11:27 2012] fullrun_mos1_xmm0505380901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 28 03:11:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505380901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Aug 28 03:11:27 2012] fullrun_mos1_xmm0505380901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 28 03:11:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505380901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Aug 28 03:11:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505380901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505380901_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 03:14:22 2012] Spatial fit model total counts = 89.664900, observed total counts = 97.000000
[Tue Aug 28 03:14:22 2012] Offset between fit and detection position for source 3 = 0.298889 pixels
[Tue Aug 28 03:14:22 2012] 90.065300 total counts/ 42.377700 bgd. counts: snr = 7.325492
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.298889 pixels
  Position = (387.8, 237.0) = 23 25 26.53 -55 50 37.0
  Extent = 6.2" x 5.6", rotation angle = 108
  Source counts = 47.7 +/- 9.5
  Background counts = 42.4
  Rate = 0.008 +/- 0.002
[Tue Aug 28 03:14:22 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 03:14:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 03:14:22 2012] Assessing source extent using major
[Tue Aug 28 03:14:22 2012] Source does appear to be extended
[Tue Aug 28 03:14:22 2012] Computing asymmetry using major and minor axis, asym = 1.10
[Tue Aug 28 03:16:41 2012] XMMSAS src. selection expression = ellipse(33690.912021, 20568.077496, 371.797211, 336.652077, 108.041819, X, Y)
[Tue Aug 28 03:16:41 2012] Writing source region out to fullrun_mos1_xmm0505380901_pi300-10000_pass1_cl_src3_src.reg
[Tue Aug 28 03:16:41 2012] Extracting stamp from image fullrun_mos1_xmm0505380901_pi300-10000_cl_sm2.00.img.gz, (366, 216) - (409, 258)
[Tue Aug 28 03:16:41 2012] XMMSAS bgd. selection expression = annulus(33690.912021, 20568.077496, 619.662018, 1239.324036, X, Y)
[Tue Aug 28 03:16:41 2012] Writing fullrun_mos1_xmm0505380901_pi300-10000_pass1_cl_src3.gif
[Tue Aug 28 03:16:43 2012] Mean detx,y = (-1203.56, 8045.82) 
[Tue Aug 28 03:16:43 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 03:16:49 2012] grppha failed
[Tue Aug 28 03:16:49 2012] Setting source spectrum file to fullrun_mos1_xmm0505380901_pi300-10000_pass1_cl_src3_src.pi.gz
[Tue Aug 28 03:16:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505380901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Aug 28 03:17:20 2012] Not generating rmf since there are only 47 counts
[Tue Aug 28 03:17:20 2012] rmf not generated due to insufficient counts
[Tue Aug 28 03:17:47 2012] Updating aperture counts using extracted products
[Tue Aug 28 03:17:47 2012] Error reading totcts from fullrun_mos1_xmm0505380901_pi300-10000_pass1_cl_src3_src.pi.gz
[Tue Aug 28 03:17:47 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 03:17:48 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Tue Aug 28 03:17:48 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Aug 28 03:17:49 2012] xmm0505380901/analysis//spectral/fullrun_mos1_xmm0505380901_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete