[Fri Dec 16 18:41:42 2011] Detection parameters:
  Position = (256.8, 380.1) = 23 23 52.78 -55 39 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.0 +/- 11.7
  Background counts = 14.8
  Rate = 0.005 +/- 0.0008

[Fri Dec 16 18:41:42 2011] Off-axis axis estimate = 6.65'
[Fri Dec 16 18:42:42 2011] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 18:42:42 2011] Initial guess for spatial extent in simple fitting = 9.75"
[Fri Dec 16 18:42:42 2011] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.197
[Fri Dec 16 18:42:42 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 9.75"
[Fri Dec 16 18:59:40 2011] fullrun_pn_xmm0505380801_pi300-10000_cl_pass0_src5.ximg exists
[Fri Dec 16 18:59:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505380801_pi300-10000_cl_pass0_src5.csv
[Fri Dec 16 18:59:40 2011] fullrun_pn_xmm0505380801_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Dec 16 18:59:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505380801_pi300-10000_cl_pass0_src5.csv
[Fri Dec 16 18:59:40 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505380801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505380801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 18:59:41 2011] fullrun_pn_xmm0505380801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Dec 16 18:59:41 2011] fullrun_pn_xmm0505380801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Dec 16 18:59:41 2011] Fit fullrun_pn_xmm0505380801_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Dec 16 19:11:14 2011] Source 5 is offset by -2.005166 and 1.901498 pixels which is larger than
2 X fitted extent = 1.159986 x 1.159986, not incorporating fit results
[Fri Dec 16 19:11:14 2011] Warning, spatial fit 5 centroid is now closest to src. 1
[Fri Dec 16 19:11:14 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 19:11:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 19:11:14 2011] Assessing source extent using major
[Fri Dec 16 19:11:14 2011] Source does appear to be extended
[Fri Dec 16 19:11:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 19:11:19 2011] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 19:11:19 2011] Initial guess for spatial extent in simple fitting = 9.75"
[Fri Dec 16 19:11:19 2011] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.197
[Fri Dec 16 19:11:19 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 9.75"
[Fri Dec 16 19:31:09 2011] fullrun_pn_xmm0505380801_pi300-10000_cl_pass1_src5.ximg exists
[Fri Dec 16 19:31:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505380801_pi300-10000_cl_pass1_src5.csv
[Fri Dec 16 19:31:09 2011] fullrun_pn_xmm0505380801_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Dec 16 19:31:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505380801_pi300-10000_cl_pass1_src5.csv
[Fri Dec 16 19:31:09 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505380801_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505380801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 19:31:09 2011] fullrun_pn_xmm0505380801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Dec 16 19:31:09 2011] fullrun_pn_xmm0505380801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Dec 16 19:31:09 2011] Fit fullrun_pn_xmm0505380801_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Dec 16 19:40:27 2011] Source 5 is offset by 7.135708 and -6.993721 pixels which is larger than
2 X fitted extent = 2.465862 x 2.465862, not incorporating fit results
[Fri Dec 16 19:40:27 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 75.802751 pixels away
[Fri Dec 16 19:40:27 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 19:40:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 19:40:27 2011] Assessing source extent using major
[Fri Dec 16 19:40:27 2011] Source does appear to be extended
[Fri Dec 16 19:40:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 19:40:33 2011] XMMSAS src. selection expression = ellipse(22290.900574, 33022.080292, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 16 19:40:33 2011] Writing source region out to fullrun_pn_xmm0505380801_pi300-10000_pass1_cl_src5_src.reg
[Fri Dec 16 19:40:33 2011] Extracting stamp from image fullrun_pn_xmm0505380801_pi300-10000_cl_sm2.00.img.gz, (219, 343) - (294, 418)
[Fri Dec 16 19:40:33 2011] XMMSAS bgd. selection expression = annulus(22290.900574, 33022.080292, 1087.500000, 2175.000000, X, Y) && !ellipse(21668.615600, 33619.017800, 437.008813, 437.008813, 0.000000, X, Y)
[Fri Dec 16 19:40:33 2011] Writing fullrun_pn_xmm0505380801_pi300-10000_pass1_cl_src5.gif
[Fri Dec 16 19:41:53 2011] Mean detx,y = (-9017.80, 285.00) 
[Fri Dec 16 19:41:54 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 16 19:42:13 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 16 19:42:13 2011] Setting source spectrum file to fullrun_pn_xmm0505380801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Dec 16 19:42:13 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505380801_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Dec 16 19:48:56 2011] Not generating rmf since there are only 70 counts
[Fri Dec 16 19:48:56 2011] rmf not generated due to insufficient counts
[Fri Dec 16 19:56:26 2011] Updating aperture counts using extracted products
[Fri Dec 16 19:56:26 2011] Error reading totcts from fullrun_pn_xmm0505380801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Dec 16 19:56:26 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 19:56:26 2011] Using photon index=1.80, rate=0.00498, arf fullrun_pn_xmm0505380801_pi300-10000_pass1_cl_src5.arf
[Fri Dec 16 19:56:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 19:56:26 2011] Updating source flux to 2.2e-14
[Fri Dec 16 19:56:32 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting