[Fri Dec 16 18:42:03 2011] Detection parameters:
  Position = (360.9, 482.3) = 23 22 59.36 -55 32 19.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.0 +/- 6.7
  Background counts = 2.4
  Rate = 0.003 +/- 0.0007

[Fri Dec 16 18:42:03 2011] Off-axis axis estimate = 14.08'
[Fri Dec 16 19:05:46 2011] Using EEF radius (= 13.47 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 19:05:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 16 19:05:46 2011] Initial guess for spatial extent in simple fitting = 13.47"
[Fri Dec 16 19:05:46 2011] source mask rpix=3.1, npix_max = 51, mask sum = 48, frac = 0.928
[Fri Dec 16 19:05:46 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 13.47"
[Fri Dec 16 19:11:11 2011] fullrun_mos2_xmm0505380801_pi300-10000_cl_pass0_src5.ximg exists
[Fri Dec 16 19:11:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380801_pi300-10000_cl_pass0_src5.csv
[Fri Dec 16 19:11:11 2011] fullrun_mos2_xmm0505380801_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Dec 16 19:11:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380801_pi300-10000_cl_pass0_src5.csv
[Fri Dec 16 19:11:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505380801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505380801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 19:11:11 2011] fullrun_mos2_xmm0505380801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Dec 16 19:11:11 2011] fullrun_mos2_xmm0505380801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Dec 16 19:11:11 2011] Fit fullrun_mos2_xmm0505380801_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Dec 16 19:11:15 2011] Spatial fit model total counts = 44.818500, observed total counts = 45.000000
[Fri Dec 16 19:11:15 2011] Offset between fit and detection position for source 3 = 1.144721 pixels
[Fri Dec 16 19:11:15 2011] 43.388200 total counts/ 19.549700 bgd. counts: snr = 5.391491
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.144721 pixels
  Position = (359.7, 482.2) = 23 22 59.95 -55 32 19.4
  Extent = 8.0 (5.1-11.5)", rotation angle = 0
  Source counts = 23.8 +/- 6.6
  Background counts = 19.5
  Rate = 0.003 +/- 0.0007
[Fri Dec 16 19:11:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 19:11:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 19:11:15 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 19:11:15 2011] Source does appear to be extended
[Fri Dec 16 19:11:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 19:35:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 19:35:56 2011] Initial guess for spatial extent in simple fitting = 7.98"
[Fri Dec 16 19:35:56 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.148
[Fri Dec 16 19:35:56 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 7.98"
[Fri Dec 16 19:40:25 2011] fullrun_mos2_xmm0505380801_pi300-10000_cl_pass1_src4.ximg exists
[Fri Dec 16 19:40:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380801_pi300-10000_cl_pass1_src4.csv
[Fri Dec 16 19:40:25 2011] fullrun_mos2_xmm0505380801_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Dec 16 19:40:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380801_pi300-10000_cl_pass1_src4.csv
[Fri Dec 16 19:40:25 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505380801_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505380801_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 19:40:25 2011] fullrun_mos2_xmm0505380801_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Dec 16 19:40:25 2011] fullrun_mos2_xmm0505380801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Dec 16 19:40:25 2011] Fit fullrun_mos2_xmm0505380801_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Dec 16 19:40:29 2011] Spatial fit model total counts = 41.999400, observed total counts = 42.000000
[Fri Dec 16 19:40:29 2011] Offset between fit and detection position for source 3 = 0.076983 pixels
[Fri Dec 16 19:40:29 2011] 40.909600 total counts/ 18.677200 bgd. counts: snr = 5.144349
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.076983 pixels
  Position = (359.6, 482.2) = 23 22 59.99 -55 32 19.5
  Extent = 7.5 (4.9-11.3)", rotation angle = 0
  Source counts = 22.2 +/- 6.4
  Background counts = 18.7
  Rate = 0.002 +/- 0.0007
[Fri Dec 16 19:40:29 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 19:40:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 19:40:29 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 19:40:29 2011] Source does appear to be extended
[Fri Dec 16 19:40:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 19:55:26 2011] XMMSAS src. selection expression = ellipse(31240.673000, 41905.465400, 449.265013, 449.265013, 0.000000, X, Y)
[Fri Dec 16 19:55:26 2011] Writing source region out to fullrun_mos2_xmm0505380801_pi300-10000_pass1_cl_src3_src.reg
[Fri Dec 16 19:55:26 2011] Extracting stamp from image fullrun_mos2_xmm0505380801_pi300-10000_cl_sm2.00.img.gz, (334, 456) - (385, 508)
[Fri Dec 16 19:55:26 2011] XMMSAS bgd. selection expression = annulus(31240.673000, 41905.465400, 748.775022, 1497.550043, X, Y)
[Fri Dec 16 19:55:26 2011] Writing fullrun_mos2_xmm0505380801_pi300-10000_pass1_cl_src3.gif
[Fri Dec 16 19:55:47 2011] Mean detx,y = (11183.44, 11927.67) 
[Fri Dec 16 19:55:48 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 16 19:55:55 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 16 19:55:55 2011] Setting source spectrum file to fullrun_mos2_xmm0505380801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 16 19:55:55 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505380801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Dec 16 19:56:06 2011] Not generating rmf since there are only 22 counts
[Fri Dec 16 19:56:06 2011] rmf not generated due to insufficient counts
[Fri Dec 16 19:56:27 2011] Updating aperture counts using extracted products
[Fri Dec 16 19:56:27 2011] Error reading totcts from fullrun_mos2_xmm0505380801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 16 19:56:27 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 19:56:27 2011] Using photon index=1.80, rate=0.00239, arf fullrun_mos2_xmm0505380801_pi300-10000_pass1_cl_src3.arf
[Fri Dec 16 19:56:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 19:56:27 2011] Updating source flux to 1e-13
[Fri Dec 16 19:56:31 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Dec 16 19:56:32 2011] xmm0505380801/analysis//spectral/fullrun_mos2_xmm0505380801_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete