[Sat Jul 28 14:11:15 2012] Detection parameters:
  Position = (403.6, 346.1) = 23 19 55.24 -55 42 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 482.9 +/- 28.4
  Background counts = 52.8
  Rate = 0.04 +/- 0.003

[Sat Jul 28 14:11:16 2012] Off-axis axis estimate = 8.37'
[Sat Jul 28 14:31:58 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 14:31:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 28 14:31:58 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Sat Jul 28 14:31:58 2012] source mask rpix=2.4, npix_max = 34, mask sum = 33, frac = 0.955
[Sat Jul 28 14:31:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.61"
[Sat Jul 28 14:44:25 2012] fullrun_mos2_xmm0505380701_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 28 14:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380701_pi300-10000_cl_pass0_src1.csv
[Sat Jul 28 14:44:25 2012] fullrun_mos2_xmm0505380701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 28 14:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380701_pi300-10000_cl_pass0_src1.csv
[Sat Jul 28 14:44:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505380701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505380701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 14:44:25 2012] fullrun_mos2_xmm0505380701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 28 14:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jul 28 14:44:25 2012] fullrun_mos2_xmm0505380701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 28 14:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jul 28 14:44:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505380701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505380701_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 14:44:30 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.853302 pixels away
[Sat Jul 28 14:44:30 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 14:44:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 14:44:30 2012] Assessing source extent using major
[Sat Jul 28 14:44:30 2012] Source does appear to be extended
[Sat Jul 28 14:44:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 15:02:04 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 15:02:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 28 15:02:04 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Sat Jul 28 15:02:04 2012] source mask rpix=2.4, npix_max = 34, mask sum = 33, frac = 0.955
[Sat Jul 28 15:02:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.61"
[Sat Jul 28 15:13:49 2012] fullrun_mos2_xmm0505380701_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 28 15:13:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380701_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 15:13:49 2012] fullrun_mos2_xmm0505380701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 28 15:13:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380701_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 15:13:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505380701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505380701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 15:13:49 2012] fullrun_mos2_xmm0505380701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 28 15:13:49 2012] fullrun_mos2_xmm0505380701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 28 15:13:49 2012] Fit fullrun_mos2_xmm0505380701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 28 15:13:53 2012] Spatial fit model total counts = 552.398000, observed total counts = 520.000000
[Sat Jul 28 15:13:53 2012] Offset between fit and detection position for source 3 = 0.267718 pixels
[Sat Jul 28 15:13:53 2012] 550.959000 total counts/ 283.934000 bgd. counts: snr = 15.846860
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.267718 pixels
  Position = (403.3, 345.9) = 23 19 55.36 -55 42 7.7
  Extent = 6.9 (6.1-7.8)", rotation angle = 0
  Source counts = 267.0 +/- 23.5
  Background counts = 283.9
  Rate = 0.02 +/- 0.002
[Sat Jul 28 15:13:53 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 15:13:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 15:13:53 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 15:13:53 2012] Source does appear to be extended
[Sat Jul 28 15:13:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 15:24:10 2012] XMMSAS src. selection expression = ellipse(35041.780800, 30048.888400, 411.040812, 411.040812, 0.000000, X, Y)
[Sat Jul 28 15:24:10 2012] Writing source region out to fullrun_mos2_xmm0505380701_pi300-10000_pass1_cl_src3_src.reg
[Sat Jul 28 15:24:10 2012] Extracting stamp from image fullrun_mos2_xmm0505380701_pi300-10000_cl_sm2.00.img.gz, (380, 322) - (427, 370)
[Sat Jul 28 15:24:10 2012] XMMSAS bgd. selection expression = annulus(35041.780800, 30048.888400, 685.068020, 1370.136039, X, Y)
[Sat Jul 28 15:24:10 2012] Writing fullrun_mos2_xmm0505380701_pi300-10000_pass1_cl_src3.gif
[Sat Jul 28 15:24:12 2012] Mean detx,y = (-528.46, 8256.46) 
[Sat Jul 28 15:24:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 15:24:32 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 15:24:32 2012] Setting source spectrum file to fullrun_mos2_xmm0505380701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 28 15:24:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505380701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jul 28 15:31:46 2012] Updating aperture counts using extracted products
[Sat Jul 28 15:31:46 2012] Error reading totcts from fullrun_mos2_xmm0505380701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 28 15:31:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 15:31:46 2012] Using photon index=1.80, rate=0.0245, arf fullrun_mos2_xmm0505380701_pi300-10000_pass1_cl_src3.arf
[Sat Jul 28 15:31:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 15:31:46 2012] Updating source flux to 4.8e-13
[Sat Jul 28 15:31:58 2012] Reading fit data from xmm0505380701/analysis//spectral/fullrun_mos2_xmm0505380701_pi300-10000_pass1_cl_src3_pl.csv
[Sat Jul 28 15:31:58 2012] Spectral fit parameter nH value = 1.65905e+12
[Sat Jul 28 15:31:58 2012] Spectral fit parameter PhoIndex value = 1.84849
[Sat Jul 28 15:31:58 2012] Failed to get F(0.3-8.0) from xmm0505380701/analysis//spectral/fullrun_mos2_xmm0505380701_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Jul 28 15:31:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 15:31:58 2012] Using Nh = 1.7e+12, photon index=1.85, rate=0.0245, arf fullrun_mos2_xmm0505380701_pi300-10000_pass1_cl_src3.arf
[Sat Jul 28 15:31:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 15:31:58 2012] Updating source flux to 4.6e-13