[Sat Jul 28 14:10:57 2012] Detection parameters:
  Position = (403.4, 345.8) = 23 19 55.35 -55 42 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 519.5 +/- 30.1
  Background counts = 71.2
  Rate = 0.04 +/- 0.002

[Sat Jul 28 14:10:58 2012] Off-axis axis estimate = 8.35'
[Sat Jul 28 14:23:19 2012] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 14:23:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 28 14:23:19 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Sat Jul 28 14:23:19 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.043
[Sat Jul 28 14:23:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.60"
[Sat Jul 28 14:31:58 2012] fullrun_mos1_xmm0505380701_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 28 14:31:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505380701_pi300-10000_cl_pass0_src1.csv
[Sat Jul 28 14:31:58 2012] fullrun_mos1_xmm0505380701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 28 14:31:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505380701_pi300-10000_cl_pass0_src1.csv
[Sat Jul 28 14:31:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505380701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505380701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 14:31:58 2012] fullrun_mos1_xmm0505380701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 28 14:31:58 2012] fullrun_mos1_xmm0505380701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 28 14:31:58 2012] Fit fullrun_mos1_xmm0505380701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 28 14:44:29 2012] Spatial fit model total counts = 608.965000, observed total counts = 603.000000
[Sat Jul 28 14:44:29 2012] Offset between fit and detection position for source 3 = 0.356034 pixels
[Sat Jul 28 14:44:29 2012] 610.633000 total counts/ 332.540000 bgd. counts: snr = 15.249939
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.356034 pixels
  Position = (403.0, 345.7) = 23 19 55.52 -55 42 8.8
  Extent = 6.7 (6.0-7.4)", rotation angle = 0
  Source counts = 278.1 +/- 24.7
  Background counts = 332.5
  Rate = 0.03 +/- 0.002
[Sat Jul 28 14:44:29 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 14:44:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 14:44:29 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 14:44:29 2012] Source does appear to be extended
[Sat Jul 28 14:44:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 14:54:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 14:54:08 2012] Initial guess for spatial extent in simple fitting = 6.72"
[Sat Jul 28 14:54:08 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.957
[Sat Jul 28 14:54:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.72"
[Sat Jul 28 15:02:04 2012] fullrun_mos1_xmm0505380701_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 28 15:02:04 2012] fullrun_mos1_xmm0505380701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 28 15:02:04 2012] Fit fullrun_mos1_xmm0505380701_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Jul 28 15:02:04 2012] fullrun_mos1_xmm0505380701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 28 15:02:04 2012] fullrun_mos1_xmm0505380701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 28 15:02:04 2012] Fit fullrun_mos1_xmm0505380701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 28 15:13:52 2012] Spatial fit model total counts = 498.426000, observed total counts = 495.000000
[Sat Jul 28 15:13:52 2012] Offset between fit and detection position for source 3 = 0.007404 pixels
[Sat Jul 28 15:13:52 2012] 500.142000 total counts/ 227.896000 bgd. counts: snr = 18.034045
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.007404 pixels
  Position = (403.0, 345.7) = 23 19 55.52 -55 42 8.7
  Extent = 6.6 (5.9-7.3)", rotation angle = 0
  Source counts = 272.2 +/- 22.4
  Background counts = 227.9
  Rate = 0.03 +/- 0.002
[Sat Jul 28 15:13:52 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 15:13:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 15:13:52 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 15:13:52 2012] Source does appear to be extended
[Sat Jul 28 15:13:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 15:18:48 2012] XMMSAS src. selection expression = ellipse(35015.416300, 30028.028000, 395.460611, 395.460611, 0.000000, X, Y)
[Sat Jul 28 15:18:48 2012] Writing source region out to fullrun_mos1_xmm0505380701_pi300-10000_pass1_cl_src3_src.reg
[Sat Jul 28 15:18:48 2012] Extracting stamp from image fullrun_mos1_xmm0505380701_pi300-10000_cl_sm2.00.img.gz, (380, 323) - (426, 368)
[Sat Jul 28 15:18:48 2012] XMMSAS bgd. selection expression = annulus(35015.416300, 30028.028000, 659.101019, 1318.202038, X, Y)
[Sat Jul 28 15:18:48 2012] Writing fullrun_mos1_xmm0505380701_pi300-10000_pass1_cl_src3.gif
[Sat Jul 28 15:18:50 2012] Mean detx,y = (8419.73, 404.51) 
[Sat Jul 28 15:18:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 15:18:59 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 15:18:59 2012] Setting source spectrum file to fullrun_mos1_xmm0505380701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 28 15:18:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505380701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jul 28 15:31:46 2012] Updating aperture counts using extracted products
[Sat Jul 28 15:31:46 2012] Error reading totcts from fullrun_mos1_xmm0505380701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 28 15:31:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 15:31:46 2012] Using photon index=1.80, rate=0.0263, arf fullrun_mos1_xmm0505380701_pi300-10000_pass1_cl_src3.arf
[Sat Jul 28 15:31:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 15:31:46 2012] Updating source flux to 4.2e-13
[Sat Jul 28 15:31:53 2012] Reading fit data from xmm0505380701/analysis//spectral/fullrun_mos1_xmm0505380701_pi300-10000_pass1_cl_src3_pl.csv
[Sat Jul 28 15:31:53 2012] Spectral fit parameter nH value = 2.58306e+20
[Sat Jul 28 15:31:53 2012] Spectral fit parameter PhoIndex value = 2.01272
[Sat Jul 28 15:31:53 2012] Failed to get F(0.3-8.0) from xmm0505380701/analysis//spectral/fullrun_mos1_xmm0505380701_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Jul 28 15:31:53 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 15:31:53 2012] Using Nh = 2.6e+20, photon index=2.01, rate=0.0263, arf fullrun_mos1_xmm0505380701_pi300-10000_pass1_cl_src3.arf
[Sat Jul 28 15:31:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 15:31:53 2012] Updating source flux to 3.9e-13