[Sun Aug 19 16:54:23 2012] Detection parameters:
  Position = (274.9, 271.5) = 23 35 51.55 -56 10 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.2 +/- 12.4
  Background counts = 21.5
  Rate = 0.009 +/- 0.001

[Sun Aug 19 16:54:24 2012] Off-axis axis estimate = 2.59'
[Sun Aug 19 16:56:58 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 16:56:58 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Sun Aug 19 16:56:58 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.965
[Sun Aug 19 16:56:58 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.73"
[Sun Aug 19 17:54:15 2012] fullrun_pn_xmm0505380601_pi300-10000_cl_pass0_src21.ximg exists
[Sun Aug 19 17:54:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505380601_pi300-10000_cl_pass0_src21.csv
[Sun Aug 19 17:54:15 2012] fullrun_pn_xmm0505380601_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Aug 19 17:54:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505380601_pi300-10000_cl_pass0_src21.csv
[Sun Aug 19 17:54:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505380601_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505380601_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 17:54:15 2012] fullrun_pn_xmm0505380601_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Aug 19 17:54:15 2012] fullrun_pn_xmm0505380601_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Aug 19 17:54:15 2012] Fit fullrun_pn_xmm0505380601_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Aug 19 18:49:13 2012] Source 21 is offset by 5.509342 and 6.648348 pixels which is larger than
2 X fitted extent = 1.244065 x 1.244065, not incorporating fit results
[Sun Aug 19 18:49:13 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 18:49:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 18:49:13 2012] Assessing source extent using major
[Sun Aug 19 18:49:13 2012] Source does appear to be extended
[Sun Aug 19 18:49:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 18:49:33 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 18:49:33 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Sun Aug 19 18:49:33 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.965
[Sun Aug 19 18:49:33 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 7.73"
[Sun Aug 19 19:39:40 2012] fullrun_pn_xmm0505380601_pi300-10000_cl_pass1_src21.ximg exists
[Sun Aug 19 19:39:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505380601_pi300-10000_cl_pass1_src21.csv
[Sun Aug 19 19:39:40 2012] fullrun_pn_xmm0505380601_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Aug 19 19:39:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505380601_pi300-10000_cl_pass1_src21.csv
[Sun Aug 19 19:39:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505380601_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505380601_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 19:39:40 2012] fullrun_pn_xmm0505380601_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Aug 19 19:39:40 2012] fullrun_pn_xmm0505380601_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Aug 19 19:39:40 2012] Fit fullrun_pn_xmm0505380601_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Aug 19 20:24:21 2012] Spatial fit model total counts = 247.999000, observed total counts = 248.000000
[Sun Aug 19 20:24:21 2012] Offset between fit and detection position for source 21 = 0.227011 pixels
[Sun Aug 19 20:24:21 2012] 245.590600 total counts/ 192.019000 bgd. counts: snr = 3.866006
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.227011 pixels
  Position = (274.7, 271.7) = 23 35 51.65 -56 10 15.1
  Extent = 5.6 (4.2-7.4)", rotation angle = 0
  Source counts = 53.6 +/- 15.7
  Background counts = 192.0
  Rate = 0.005 +/- 0.002
[Sun Aug 19 20:24:21 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 20:24:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 20:24:21 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 20:24:21 2012] Source does appear to be extended
[Sun Aug 19 20:24:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 20:24:45 2012] XMMSAS src. selection expression = ellipse(23847.828200, 23587.631400, 333.740410, 333.740410, 0.000000, X, Y)
[Sun Aug 19 20:24:45 2012] Writing source region out to fullrun_pn_xmm0505380601_pi300-10000_pass1_cl_src21_src.reg
[Sun Aug 19 20:24:45 2012] Extracting stamp from image fullrun_pn_xmm0505380601_pi300-10000_cl_sm2.00.img.gz, (255, 252) - (294, 291)
[Sun Aug 19 20:24:45 2012] XMMSAS bgd. selection expression = annulus(23847.828200, 23587.631400, 556.234016, 1112.468032, X, Y)
[Sun Aug 19 20:24:45 2012] Writing fullrun_pn_xmm0505380601_pi300-10000_pass1_cl_src21.gif
[Sun Aug 19 20:41:22 2012] Mean detx,y = (-151.58, 4443.08) 
[Sun Aug 19 20:41:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 20:41:41 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 20:41:41 2012] Setting source spectrum file to fullrun_pn_xmm0505380601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Aug 19 20:41:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505380601_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sun Aug 19 21:00:01 2012] Not generating rmf since there are only 53 counts
[Sun Aug 19 21:00:01 2012] rmf not generated due to insufficient counts
[Sun Aug 19 21:35:38 2012] Updating aperture counts using extracted products
[Sun Aug 19 21:35:38 2012] Error reading totcts from fullrun_pn_xmm0505380601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Aug 19 21:35:39 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 21:35:39 2012] Using photon index=1.80, rate=0.00518, arf fullrun_pn_xmm0505380601_pi300-10000_pass1_cl_src21.arf
[Sun Aug 19 21:35:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 21:35:40 2012] Updating source flux to 1.9e-14
[Sun Aug 19 21:36:19 2012] Flag b found in src. 21 procflags, skipping spectral fitting
[Sun Aug 19 21:36:19 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting