[Sun Aug 19 16:55:17 2012] Detection parameters:
  Position = (354.6, 268.0) = 23 35 10.00 -56 10 37.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.2 +/- 11.4
  Background counts = 6.7
  Rate = 0.007 +/- 0.001

[Sun Aug 19 16:55:18 2012] Off-axis axis estimate = 4.63'
[Sun Aug 19 18:22:42 2012] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 18:22:42 2012] Initial guess for spatial extent in simple fitting = 8.75"
[Sun Aug 19 18:22:42 2012] source mask rpix=2.0, npix_max = 25, mask sum = 16, frac = 0.635
[Sun Aug 19 18:22:42 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.75"
[Sun Aug 19 18:49:03 2012] fullrun_mos2_xmm0505380601_pi300-10000_cl_pass0_src6.ximg exists
[Sun Aug 19 18:49:03 2012] fullrun_mos2_xmm0505380601_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Aug 19 18:49:03 2012] Fit fullrun_mos2_xmm0505380601_pi300-10000_cl_pass0_src6 appears to have run properly
[Sun Aug 19 18:49:03 2012] fullrun_mos2_xmm0505380601_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Aug 19 18:49:03 2012] fullrun_mos2_xmm0505380601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Aug 19 18:49:03 2012] Fit fullrun_mos2_xmm0505380601_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Aug 19 18:49:22 2012] Spatial fit model total counts = 125.472000, observed total counts = 129.000000
[Sun Aug 19 18:49:22 2012] Offset between fit and detection position for source 10 = 0.946598 pixels
[Sun Aug 19 18:49:22 2012] 126.957000 total counts/ 91.955000 bgd. counts: snr = 3.650104
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.946598 pixels
  Position = (354.2, 267.1) = 23 35 10.23 -56 10 34.8
  Extent = 4.6 (3.4-6.9)", rotation angle = 0
  Source counts = 35.0 +/- 11.3
  Background counts = 92.0
  Rate = 0.003 +/- 0.0009
[Sun Aug 19 18:49:22 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 18:49:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 18:49:22 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 18:49:22 2012] Source does appear to be extended
[Sun Aug 19 18:49:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 20:01:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 19 20:01:29 2012] Initial guess for spatial extent in simple fitting = 4.59"
[Sun Aug 19 20:01:29 2012] source mask rpix=1.1, npix_max = 9, mask sum = 6, frac = 0.620
[Sun Aug 19 20:01:29 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 4.59"
[Sun Aug 19 20:24:11 2012] fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_src6.ximg exists
[Sun Aug 19 20:24:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_src6.csv
[Sun Aug 19 20:24:11 2012] fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Aug 19 20:24:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_src6.csv
[Sun Aug 19 20:24:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 20:24:11 2012] fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Aug 19 20:24:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Aug 19 20:24:11 2012] fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Aug 19 20:24:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Aug 19 20:24:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 20:24:31 2012] Spatial fit model total counts = 149.320000, observed total counts = 129.000000
[Sun Aug 19 20:24:31 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 19 20:24:31 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 20:24:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 20:24:31 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 20:24:31 2012] Source does appear to be extended
[Sun Aug 19 20:24:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 21:24:26 2012] XMMSAS src. selection expression = ellipse(30765.481820, 23190.182800, 275.615408, 275.615408, 0.000000, X, Y)
[Sun Aug 19 21:24:26 2012] Writing source region out to fullrun_mos2_xmm0505380601_pi300-10000_pass1_cl_src10_src.reg
[Sun Aug 19 21:24:26 2012] Extracting stamp from image fullrun_mos2_xmm0505380601_pi300-10000_cl_sm2.00.img.gz, (338, 251) - (370, 283)
[Sun Aug 19 21:24:26 2012] XMMSAS bgd. selection expression = annulus(30765.481820, 23190.182800, 459.359013, 918.718026, X, Y) && !ellipse(29892.483620, 23953.468200, 300.550409, 300.550409, 0.000000, X, Y)
[Sun Aug 19 21:24:26 2012] Writing fullrun_mos2_xmm0505380601_pi300-10000_pass1_cl_src10.gif
[Sun Aug 19 21:26:38 2012] Mean detx,y = (-3633.65, 1168.83) 
[Sun Aug 19 21:26:41 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 21:26:55 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 21:26:55 2012] Setting source spectrum file to fullrun_mos2_xmm0505380601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Aug 19 21:26:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505380601_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Aug 19 21:33:59 2012] Not generating rmf since there are only 35 counts
[Sun Aug 19 21:33:59 2012] rmf not generated due to insufficient counts
[Sun Aug 19 21:35:42 2012] Updating aperture counts using extracted products
[Sun Aug 19 21:35:42 2012] Error reading totcts from fullrun_mos2_xmm0505380601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Aug 19 21:35:42 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 21:35:42 2012] Using photon index=1.80, rate=0.00282, arf fullrun_mos2_xmm0505380601_pi300-10000_pass1_cl_src10.arf
[Sun Aug 19 21:35:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 21:35:43 2012] Updating source flux to 4.3e-14
[Sun Aug 19 21:36:11 2012] Flag p found in src. 10 procflags, skipping spectral fitting
[Sun Aug 19 21:36:11 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting