[Sun Aug 19 16:55:17 2012] Detection parameters:
  Position = (323.3, 163.3) = 23 35 26.30 -56 18 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 368.0 +/- 22.9
  Background counts = 6.2
  Rate = 0.05 +/- 0.003

[Sun Aug 19 16:55:18 2012] Off-axis axis estimate = 9.96'
[Sun Aug 19 18:22:42 2012] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 18:22:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 19 18:22:42 2012] Initial guess for spatial extent in simple fitting = 11.41"
[Sun Aug 19 18:22:42 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.923
[Sun Aug 19 18:22:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.41"
[Sun Aug 19 18:49:03 2012] fullrun_mos2_xmm0505380601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 19 18:49:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380601_pi300-10000_cl_pass0_src1.csv
[Sun Aug 19 18:49:03 2012] fullrun_mos2_xmm0505380601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 19 18:49:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380601_pi300-10000_cl_pass0_src1.csv
[Sun Aug 19 18:49:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505380601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505380601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 18:49:03 2012] fullrun_mos2_xmm0505380601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 19 18:49:03 2012] fullrun_mos2_xmm0505380601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 19 18:49:03 2012] Fit fullrun_mos2_xmm0505380601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug 19 18:49:22 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.466422 pixels away
[Sun Aug 19 18:49:22 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 18:49:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 18:49:22 2012] Assessing source extent using major
[Sun Aug 19 18:49:22 2012] Source does appear to be extended
[Sun Aug 19 18:49:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 20:01:29 2012] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 20:01:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 19 20:01:29 2012] Initial guess for spatial extent in simple fitting = 11.41"
[Sun Aug 19 20:01:29 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.923
[Sun Aug 19 20:01:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.41"
[Sun Aug 19 20:24:11 2012] fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug 19 20:24:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_src1.csv
[Sun Aug 19 20:24:11 2012] fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug 19 20:24:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_src1.csv
[Sun Aug 19 20:24:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 20:24:11 2012] fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug 19 20:24:11 2012] fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug 19 20:24:11 2012] Fit fullrun_mos2_xmm0505380601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug 19 20:24:31 2012] Spatial fit model total counts = 461.875000, observed total counts = 451.000000
[Sun Aug 19 20:24:31 2012] Offset between fit and detection position for source 1 = 0.163340 pixels
[Sun Aug 19 20:24:31 2012] 464.283000 total counts/ 191.827000 bgd. counts: snr = 19.671683
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.163340 pixels
  Position = (323.3, 163.5) = 23 35 26.29 -56 18 5.8
  Extent = 5.9 (5.3-6.7)", rotation angle = 0
  Source counts = 272.5 +/- 21.5
  Background counts = 191.8
  Rate = 0.02 +/- 0.002
[Sun Aug 19 20:24:31 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 20:24:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 20:24:31 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 20:24:31 2012] Source does appear to be extended
[Sun Aug 19 20:24:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 21:24:26 2012] XMMSAS src. selection expression = ellipse(28075.258400, 14172.369120, 355.074010, 355.074010, 0.000000, X, Y)
[Sun Aug 19 21:24:26 2012] Writing source region out to fullrun_mos2_xmm0505380601_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug 19 21:24:26 2012] Extracting stamp from image fullrun_mos2_xmm0505380601_pi300-10000_cl_sm2.00.img.gz, (303, 143) - (344, 184)
[Sun Aug 19 21:24:26 2012] XMMSAS bgd. selection expression = annulus(28075.258400, 14172.369120, 591.790017, 1183.580034, X, Y)
[Sun Aug 19 21:24:26 2012] Writing fullrun_mos2_xmm0505380601_pi300-10000_pass1_cl_src1.gif
[Sun Aug 19 21:24:29 2012] Mean detx,y = (-10025.67, -5724.94) 
[Sun Aug 19 21:24:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 21:24:51 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 21:24:51 2012] Setting source spectrum file to fullrun_mos2_xmm0505380601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 19 21:24:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505380601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug 19 21:35:41 2012] Updating aperture counts using extracted products
[Sun Aug 19 21:35:41 2012] Error reading totcts from fullrun_mos2_xmm0505380601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 19 21:35:42 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 21:35:42 2012] Using photon index=1.80, rate=0.0219, arf fullrun_mos2_xmm0505380601_pi300-10000_pass1_cl_src1.arf
[Sun Aug 19 21:35:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 21:35:42 2012] Updating source flux to 4.5e-13
[Sun Aug 19 21:36:19 2012] Reading fit data from xmm0505380601/analysis//spectral/fullrun_mos2_xmm0505380601_pi300-10000_pass1_cl_src1_pl.csv
[Sun Aug 19 21:36:19 2012] Spectral fit parameter nH value = 1.16966e+20
[Sun Aug 19 21:36:19 2012] Spectral fit parameter PhoIndex value = 1.53557
[Sun Aug 19 21:36:19 2012] Failed to get F(0.3-8.0) from xmm0505380601/analysis//spectral/fullrun_mos2_xmm0505380601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Aug 19 21:36:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 21:36:19 2012] Using Nh = 1.2e+20, photon index=1.54, rate=0.0219, arf fullrun_mos2_xmm0505380601_pi300-10000_pass1_cl_src1.arf
[Sun Aug 19 21:36:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 21:36:19 2012] Updating source flux to 5.2e-13