[Sun Mar 18 10:52:03 2012] Detection parameters:
  Position = (275.3, 180.4) = 23 32 46.74 -56 15 47.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.8 +/- 7.7
  Background counts = 5.9
  Rate = 0.01 +/- 0.003

[Sun Mar 18 10:52:03 2012] Off-axis axis estimate = 8.72'
[Sun Mar 18 10:56:40 2012] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 10:56:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 18 10:56:40 2012] Initial guess for spatial extent in simple fitting = 10.79"
[Sun Mar 18 10:56:40 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.013
[Sun Mar 18 10:56:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.79"
[Sun Mar 18 11:02:54 2012] fullrun_mos1_xmm0505380501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 18 11:02:54 2012] fullrun_mos1_xmm0505380501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 18 11:02:54 2012] Fit fullrun_mos1_xmm0505380501_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Mar 18 11:02:54 2012] fullrun_mos1_xmm0505380501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 18 11:02:54 2012] fullrun_mos1_xmm0505380501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 18 11:02:54 2012] Fit fullrun_mos1_xmm0505380501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 18 11:08:57 2012] Spatial fit model total counts = 58.055000, observed total counts = 58.000000
[Sun Mar 18 11:08:57 2012] Offset between fit and detection position for source 2 = 0.489369 pixels
[Sun Mar 18 11:08:57 2012] 58.479700 total counts/ 29.844900 bgd. counts: snr = 5.241542
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.489369 pixels
  Position = (275.7, 180.5) = 23 32 46.49 -56 15 45.7
  Extent = 8.9 (6.2-13.3)" x 5.2 (3.7-7.5)", rotation angle = 349 (321-31) degrees
  Source counts = 28.6 +/- 7.6
  Background counts = 29.8
  Rate = 0.009 +/- 0.003
[Sun Mar 18 11:08:57 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 11:08:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 11:08:57 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 11:08:57 2012] Source does appear to be extended
[Sun Mar 18 11:08:57 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.82
[Sun Mar 18 11:11:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 18 11:11:45 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Sun Mar 18 11:11:45 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.114
[Sun Mar 18 11:11:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.04"
[Sun Mar 18 11:18:11 2012] fullrun_mos1_xmm0505380501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 18 11:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505380501_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 11:18:11 2012] fullrun_mos1_xmm0505380501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 18 11:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505380501_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 11:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505380501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505380501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 11:18:11 2012] fullrun_mos1_xmm0505380501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 18 11:18:11 2012] fullrun_mos1_xmm0505380501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 18 11:18:11 2012] Fit fullrun_mos1_xmm0505380501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 18 11:24:05 2012] Spatial fit model total counts = 36.902700, observed total counts = 43.000000
[Sun Mar 18 11:24:05 2012] Offset between fit and detection position for source 2 = 0.217412 pixels
[Sun Mar 18 11:24:05 2012] 38.279030 total counts/ 5.983430 bgd. counts: snr = 13.202867
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.217412 pixels
  Position = (275.5, 180.5) = 23 32 46.61 -56 15 45.7
  Extent = 9.8 (7.4-13.1)" x 5.4 (4.5-7.3)", rotation angle = 166
  Source counts = 32.3 +/- 6.2
  Background counts = 6.0
  Rate = 0.01 +/- 0.002
[Sun Mar 18 11:24:05 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 11:24:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 11:24:05 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 11:24:05 2012] Source does appear to be extended
[Sun Mar 18 11:24:05 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Sun Mar 18 11:25:33 2012] XMMSAS src. selection expression = ellipse(23921.492000, 15657.547800, 588.453617, 324.906609, 166.370000, X, Y)
[Sun Mar 18 11:25:33 2012] Writing source region out to fullrun_mos1_xmm0505380501_pi300-10000_pass1_cl_src2_src.reg
[Sun Mar 18 11:25:33 2012] Extracting stamp from image fullrun_mos1_xmm0505380501_pi300-10000_cl_sm2.00.img.gz, (242, 147) - (309, 214)
[Sun Mar 18 11:25:33 2012] XMMSAS bgd. selection expression = annulus(23921.492000, 15657.547800, 980.756028, 1961.512056, X, Y)
[Sun Mar 18 11:25:33 2012] Writing fullrun_mos1_xmm0505380501_pi300-10000_pass1_cl_src2.gif
[Sun Mar 18 11:25:35 2012] Mean detx,y = (9037.53, -1861.44) 
[Sun Mar 18 11:25:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 11:25:53 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 11:25:53 2012] Setting source spectrum file to fullrun_mos1_xmm0505380501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Mar 18 11:25:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505380501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Mar 18 11:26:19 2012] Not generating rmf since there are only 32 counts
[Sun Mar 18 11:26:19 2012] rmf not generated due to insufficient counts
[Sun Mar 18 11:28:26 2012] Updating aperture counts using extracted products
[Sun Mar 18 11:28:26 2012] Error reading totcts from fullrun_mos1_xmm0505380501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Mar 18 11:28:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 11:28:26 2012] Using photon index=1.80, rate=0.0106, arf fullrun_mos1_xmm0505380501_pi300-10000_pass1_cl_src2.arf
[Sun Mar 18 11:28:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 11:28:26 2012] Updating source flux to 2e-13
[Sun Mar 18 11:28:27 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Mar 18 11:28:28 2012] xmm0505380501/analysis//spectral/fullrun_mos1_xmm0505380501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete