[Fri Mar 23 10:28:19 2012] Detection parameters:
  Position = (220.8, 125.7) = 23 22 19.00 -56 20 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.6 +/- 13.8
  Background counts = 43.9
  Rate = 0.006 +/- 0.001

[Fri Mar 23 10:28:19 2012] Off-axis axis estimate = 13.73'
[Fri Mar 23 10:31:58 2012] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 10:31:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 23 10:31:58 2012] Initial guess for spatial extent in simple fitting = 13.30"
[Fri Mar 23 10:31:58 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.969
[Fri Mar 23 10:31:58 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.30"
[Fri Mar 23 10:47:20 2012] fullrun_pn_xmm0505380101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Mar 23 10:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505380101_pi300-10000_cl_pass0_src4.csv
[Fri Mar 23 10:47:20 2012] fullrun_pn_xmm0505380101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Mar 23 10:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505380101_pi300-10000_cl_pass0_src4.csv
[Fri Mar 23 10:47:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505380101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505380101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 10:47:20 2012] fullrun_pn_xmm0505380101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Mar 23 10:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505380101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Mar 23 10:47:20 2012] fullrun_pn_xmm0505380101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Mar 23 10:47:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505380101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Mar 23 10:47:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505380101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505380101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 11:01:40 2012] Spatial fit model total counts = 200.079000, observed total counts = 181.000000
[Fri Mar 23 11:01:40 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 23 11:01:40 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 11:01:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 11:01:40 2012] Assessing source extent using major
[Fri Mar 23 11:01:40 2012] Source does appear to be extended
[Fri Mar 23 11:01:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 11:01:50 2012] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 11:01:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 23 11:01:50 2012] Initial guess for spatial extent in simple fitting = 13.30"
[Fri Mar 23 11:01:50 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.969
[Fri Mar 23 11:01:50 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 13.30"
[Fri Mar 23 11:17:50 2012] fullrun_pn_xmm0505380101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Mar 23 11:17:50 2012] fullrun_pn_xmm0505380101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Mar 23 11:17:50 2012] Fit fullrun_pn_xmm0505380101_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Mar 23 11:17:50 2012] fullrun_pn_xmm0505380101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Mar 23 11:17:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505380101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Mar 23 11:17:50 2012] fullrun_pn_xmm0505380101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Mar 23 11:17:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505380101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Mar 23 11:17:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505380101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505380101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 11:28:57 2012] Spatial fit model total counts = 200.079000, observed total counts = 181.000000
[Fri Mar 23 11:28:57 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 23 11:28:57 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 11:28:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 11:28:57 2012] Assessing source extent using major
[Fri Mar 23 11:28:57 2012] Source does appear to be extended
[Fri Mar 23 11:28:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 11:29:07 2012] XMMSAS src. selection expression = ellipse(19160.273224, 10883.050133, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 23 11:29:07 2012] Writing source region out to fullrun_pn_xmm0505380101_pi300-10000_pass1_cl_src4_src.reg
[Fri Mar 23 11:29:07 2012] Extracting stamp from image fullrun_pn_xmm0505380101_pi300-10000_cl_sm2.00.img.gz, (183, 88) - (258, 163)
[Fri Mar 23 11:29:07 2012] XMMSAS bgd. selection expression = annulus(19160.273224, 10883.050133, 1087.500000, 2175.000000, X, Y)
[Fri Mar 23 11:29:07 2012] Writing fullrun_pn_xmm0505380101_pi300-10000_pass1_cl_src4.gif
[Fri Mar 23 11:30:54 2012] Mean detx,y = (-1586.91, -14999.32) 
[Fri Mar 23 11:30:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 23 11:31:54 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 23 11:31:54 2012] Setting source spectrum file to fullrun_pn_xmm0505380101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 23 11:31:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505380101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Mar 23 11:34:10 2012] Not generating rmf since there are only 67 counts
[Fri Mar 23 11:34:10 2012] rmf not generated due to insufficient counts
[Fri Mar 23 11:38:31 2012] Updating aperture counts using extracted products
[Fri Mar 23 11:38:31 2012] Error reading totcts from fullrun_pn_xmm0505380101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 23 11:38:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 23 11:38:31 2012] Using photon index=1.80, rate=0.00613, arf fullrun_pn_xmm0505380101_pi300-10000_pass1_cl_src4.arf
[Fri Mar 23 11:38:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 23 11:38:31 2012] Updating source flux to 4.4e-14
[Fri Mar 23 11:38:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Mar 23 11:38:36 2012] xmm0505380101/analysis//spectral/fullrun_pn_xmm0505380101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete