[Sun May  6 10:20:37 2012] Detection parameters:
  Position = (358.0, 363.9) = 5 25 24.89 -65 58 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19445.2 +/- 169.4
  Background counts = 115.2
  Rate = 0.5 +/- 0.005

[Sun May  6 10:20:42 2012] Off-axis axis estimate = 6.42'
[Sun May  6 10:33:04 2012] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Sun May  6 10:33:04 2012] Initial guess for spatial extent in simple fitting = 9.64"
[Sun May  6 10:33:04 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.221
[Sun May  6 10:33:04 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.64"
[Sun May  6 22:35:00 2012] fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_src11.ximg exists
[Sun May  6 22:35:00 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_src11.csv
[Sun May  6 22:35:00 2012] fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun May  6 22:35:00 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_src11.csv
[Sun May  6 22:35:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 22:35:01 2012] fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun May  6 22:35:01 2012] fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun May  6 22:35:01 2012] Fit fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon May  7 12:28:59 2012] Spatial fit model total counts = 49274.100000, observed total counts = 54515.000000
[Mon May  7 12:28:59 2012] Offset between fit and detection position for source 12 = 1.296979 pixels
[Mon May  7 12:28:59 2012] 42682.785740 total counts/ 4.885740 bgd. counts: snr = 19308.025583
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.296979 pixels
  Position = (359.3, 364.0) = 5 25 23.97 -65 58 17.4
  Extent = 19.3 (19.3-38.5)", rotation angle = 0
  Source counts = 42677.9 +/- 206.6
  Background counts = 4.9
  Rate = 0.7 +/- 0.003
[Mon May  7 12:28:59 2012] Vigneting correction estimate = 1.000000
[Mon May  7 12:28:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 12:28:59 2012] Assessing source extent using major axis lower bound
[Mon May  7 12:28:59 2012] Source does appear to be extended
[Mon May  7 12:28:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 12:28:59 2012] Source is confused with source 5
[Mon May  7 12:29:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  7 12:29:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 12:29:39 2012] Initial guess for spatial extent in simple fitting = 19.27"
[Mon May  7 12:29:39 2012] source mask rpix=4.4, npix_max = 97, mask sum = 100, frac = 1.028
[Mon May  7 12:29:39 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 19.27"
[Tue May  8 00:28:49 2012] fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_src11.ximg exists
[Tue May  8 00:28:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_src11.csv
[Tue May  8 00:28:49 2012] fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue May  8 00:28:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_src11.csv
[Tue May  8 00:28:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 00:28:49 2012] fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue May  8 00:28:49 2012] fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue May  8 00:28:49 2012] Fit fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue May  8 19:35:44 2012] Warning, spatial fit 11 centroid is now closest to src. 4
[Tue May  8 19:35:44 2012] Vigneting correction estimate = 1.000000
[Tue May  8 19:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 19:35:44 2012] Assessing source extent using major axis lower bound
[Tue May  8 19:35:44 2012] Source does appear to be extended
[Tue May  8 19:35:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 19:36:14 2012] Counts = 42677.900000, rescaling region sizes by 3.000000
[Tue May  8 19:36:14 2012] XMMSAS src. selection expression = ellipse(31210.057200, 31616.173400, 3469.284100, 3469.284100, 0.000000, X, Y)
[Tue May  8 19:36:14 2012] Writing source region out to fullrun_pn_xmm0505310101_pi300-10000_pass1_cl_src12_src.reg
[Tue May  8 19:36:14 2012] Extracting stamp from image fullrun_pn_xmm0505310101_pi300-10000_cl_sm2.00.img.gz, (160, 165) - (559, 563)
[Tue May  8 19:36:14 2012] XMMSAS bgd. selection expression = annulus(31210.057200, 31616.173400, 17346.420499, 34692.840998, X, Y) && !ellipse(26526.451600, 23460.837280, 3607.488104, 3607.488104, 0.000000, X, Y) && !ellipse(31615.355499, 29185.342590, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(30257.560200, 30435.272400, 4399.944127, 4399.944127, 0.000000, X, Y) && !ellipse(31020.450000, 31452.944000, 9251.424266, 9251.424266, 0.000000, X, Y) && !ellipse(31639.664948, 30921.731750, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(32233.453480, 30314.439200, 359.070410, 359.070410, 0.000000, X, Y) && !ellipse(35584.717224, 25012.225952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24244.378880, 24925.609000, 411.471212, 411.471212, 0.000000, X, Y) && !ellipse(27575.577087, 23271.442719, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27167.594666, 22513.044220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26792.855865, 20557.463806, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(28278.249176, 27956.103851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31028.864838, 28211.923889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24597.101501, 26523.938568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30489.992126, 15605.948334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24971.665070, 18196.497589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27372.748779, 25629.371582, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(22645.702759, 11341.452225, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 19:36:14 2012] Writing fullrun_pn_xmm0505310101_pi300-10000_pass1_cl_src12.gif
[Tue May  8 22:04:38 2012] Mean detx,y = (-7591.25, -335.29) 
[Tue May  8 22:05:06 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 22:21:32 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 22:21:33 2012] Setting source spectrum file to fullrun_pn_xmm0505310101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue May  8 22:21:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505310101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri May 11 19:03:28 2012] Updating aperture counts using extracted products
[Fri May 11 19:03:28 2012] Error reading totcts from fullrun_pn_xmm0505310101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri May 11 19:03:29 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 11 19:03:29 2012] Using photon index=1.80, rate=0.656, arf fullrun_pn_xmm0505310101_pi300-10000_pass1_cl_src12.arf
[Fri May 11 19:03:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 11 19:03:29 2012] Updating source flux to 3.2e-12
[Fri May 11 19:13:38 2012] Flag c found in src. 12 procflags, skipping spectral fitting