[Sun May  6 10:20:37 2012] Detection parameters:
  Position = (312.8, 259.3) = 5 25 57.01 -66 5 47.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4080.0 +/- 87.0
  Background counts = 130.3
  Rate = 0.08 +/- 0.002

[Sun May  6 10:20:42 2012] Off-axis axis estimate = 3.02'
[Sun May  6 10:33:04 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sun May  6 10:33:04 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Sun May  6 10:33:04 2012] source mask rpix=1.8, npix_max = 21, mask sum = 18, frac = 0.832
[Sun May  6 10:33:04 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.94"
[Sun May  6 22:35:00 2012] fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_src10.ximg exists
[Sun May  6 22:35:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_src10.csv
[Sun May  6 22:35:00 2012] fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun May  6 22:35:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_src10.csv
[Sun May  6 22:35:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 22:35:01 2012] fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun May  6 22:35:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun May  6 22:35:01 2012] fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun May  6 22:35:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun May  6 22:35:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 12:28:59 2012] Warning, spatial fit 10 centroid is now closest to src. 9
[Mon May  7 12:28:59 2012] Vigneting correction estimate = 1.000000
[Mon May  7 12:28:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 12:28:59 2012] Assessing source extent using major
[Mon May  7 12:28:59 2012] Source does appear to be extended
[Mon May  7 12:28:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 12:28:59 2012] Source is confused with source 11
[Mon May  7 12:29:39 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Mon May  7 12:29:39 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Mon May  7 12:29:39 2012] source mask rpix=1.8, npix_max = 21, mask sum = 18, frac = 0.832
[Mon May  7 12:29:39 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.94"
[Tue May  8 00:28:49 2012] fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_src10.ximg exists
[Tue May  8 00:28:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_src10.csv
[Tue May  8 00:28:49 2012] fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue May  8 00:28:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_src10.csv
[Tue May  8 00:28:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 00:28:49 2012] fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue May  8 00:28:49 2012] fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue May  8 00:28:49 2012] Fit fullrun_pn_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue May  8 19:35:44 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.043678 pixels away
[Tue May  8 19:35:44 2012] Vigneting correction estimate = 1.000000
[Tue May  8 19:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 19:35:44 2012] Assessing source extent using major
[Tue May  8 19:35:44 2012] Source does appear to be extended
[Tue May  8 19:35:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 19:36:14 2012] Counts = 4080.032715, rescaling region sizes by 2.000000
[Tue May  8 19:36:14 2012] XMMSAS src. selection expression = ellipse(27167.594666, 22513.044220, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May  8 19:36:14 2012] Writing source region out to fullrun_pn_xmm0505310101_pi300-10000_pass1_cl_src10_src.reg
[Tue May  8 19:36:14 2012] Extracting stamp from image fullrun_pn_xmm0505310101_pi300-10000_cl_sm2.00.img.gz, (238, 184) - (388, 334)
[Tue May  8 19:36:14 2012] XMMSAS bgd. selection expression = annulus(27167.594666, 22513.044220, 4350.000000, 8700.000000, X, Y) && !ellipse(26526.451600, 23460.837280, 3607.488104, 3607.488104, 0.000000, X, Y) && !ellipse(31615.355499, 29185.342590, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(30257.560200, 30435.272400, 4399.944127, 4399.944127, 0.000000, X, Y) && !ellipse(31020.450000, 31452.944000, 9251.424266, 9251.424266, 0.000000, X, Y) && !ellipse(31639.664948, 30921.731750, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(32233.453480, 30314.439200, 359.070410, 359.070410, 0.000000, X, Y) && !ellipse(35584.717224, 25012.225952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24244.378880, 24925.609000, 411.471212, 411.471212, 0.000000, X, Y) && !ellipse(27575.577087, 23271.442719, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26792.855865, 20557.463806, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(31210.057200, 31616.173400, 4625.712133, 4625.712133, 0.000000, X, Y) && !ellipse(28278.249176, 27956.103851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31028.864838, 28211.923889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24597.101501, 26523.938568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30489.992126, 15605.948334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24971.665070, 18196.497589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27372.748779, 25629.371582, 3480.000000, 3480.000000, 0.000000, X, Y)
[Tue May  8 19:36:14 2012] Writing fullrun_pn_xmm0505310101_pi300-10000_pass1_cl_src10.gif
[Tue May  8 21:44:20 2012] Mean detx,y = (731.14, -638.59) 
[Tue May  8 21:45:01 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 21:50:47 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 21:50:48 2012] Setting source spectrum file to fullrun_pn_xmm0505310101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue May  8 21:50:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505310101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed May  9 22:36:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  9 22:36:29 2012] rmf not generated due to insufficient counts
[Fri May 11 19:03:28 2012] Updating aperture counts using extracted products
[Fri May 11 19:03:28 2012] Error reading totcts from fullrun_pn_xmm0505310101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri May 11 19:03:29 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 11 19:03:29 2012] Using photon index=1.80, rate=0.0841, arf fullrun_pn_xmm0505310101_pi300-10000_pass1_cl_src10.arf
[Fri May 11 19:03:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 11 19:03:29 2012] Updating source flux to 2.9e-13
[Fri May 11 19:13:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting