[Sun May  6 10:20:56 2012] Detection parameters:
  Position = (258.9, 181.8) = 5 26 35.73 -66 11 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.2 +/- 11.9
  Background counts = 27.6
  Rate = 0.001 +/- 0.0003

[Sun May  6 10:20:57 2012] Off-axis axis estimate = 8.93'
[Mon May  7 07:06:21 2012] Using EEF radius (= 10.89 ")to estimate initial spatial extent for simple fitting
[Mon May  7 07:06:21 2012] Initial guess for spatial extent in simple fitting = 10.89"
[Mon May  7 07:06:21 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.997
[Mon May  7 07:06:21 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 10.89"
[Mon May  7 12:28:37 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src20.ximg exists
[Mon May  7 12:28:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src20.csv
[Mon May  7 12:28:37 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon May  7 12:28:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src20.csv
[Mon May  7 12:28:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 12:28:38 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon May  7 12:28:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon May  7 12:28:38 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon May  7 12:28:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon May  7 12:28:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 12:29:25 2012] Spatial fit model total counts = 336.401000, observed total counts = 302.000000
[Mon May  7 12:29:25 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  7 12:29:25 2012] Vigneting correction estimate = 1.000000
[Mon May  7 12:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 12:29:25 2012] Assessing source extent using major
[Mon May  7 12:29:25 2012] Source does appear to be extended
[Mon May  7 12:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 12:29:25 2012] Deleting source due to low Poisson probability 0.8