[Sun May  6 10:20:51 2012] Detection parameters:
  Position = (364.9, 336.9) = 5 25 19.91 -66 0 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6694.1 +/- 96.0
  Background counts = 57.1
  Rate = 0.2 +/- 0.002

[Sun May  6 10:20:57 2012] Off-axis axis estimate = 5.57'
[Mon May  7 07:06:20 2012] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Mon May  7 07:06:20 2012] Initial guess for spatial extent in simple fitting = 9.21"
[Mon May  7 07:06:20 2012] source mask rpix=2.1, npix_max = 27, mask sum = 32, frac = 1.167
[Mon May  7 07:06:20 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.21"
[Mon May  7 12:28:37 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src3.ximg exists
[Mon May  7 12:28:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src3.csv
[Mon May  7 12:28:37 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May  7 12:28:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src3.csv
[Mon May  7 12:28:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 12:28:37 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May  7 12:28:38 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May  7 12:28:38 2012] Fit fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May  7 12:29:25 2012] Spatial fit model total counts = 21227.200000, observed total counts = 19480.000000
[Mon May  7 12:29:25 2012] Offset between fit and detection position for source 3 = 0.361876 pixels
[Mon May  7 12:29:25 2012] 20163.940000 total counts/ 13846.700000 bgd. counts: snr = 53.685158
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.361876 pixels
  Position = (365.0, 336.6) = 5 25 19.83 -66 0 16.4
  Extent = 11.5 (11.5-11.5)", rotation angle = 0
  Source counts = 6317.2 +/- 142.0
  Background counts = 13846.7
  Rate = 0.09 +/- 0.002
[Mon May  7 12:29:25 2012] Vigneting correction estimate = 1.000000
[Mon May  7 12:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 12:29:25 2012] Assessing source extent using major axis lower bound
[Mon May  7 12:29:25 2012] Source does appear to be extended
[Mon May  7 12:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 12:29:25 2012] Source is confused with source 6
[Tue May  8 16:34:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 16:34:51 2012] Initial guess for spatial extent in simple fitting = 11.50"
[Tue May  8 16:34:51 2012] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.886
[Tue May  8 16:34:51 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.50"
[Tue May  8 19:35:32 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src2.ximg exists
[Tue May  8 19:35:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src2.csv
[Tue May  8 19:35:32 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue May  8 19:35:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src2.csv
[Tue May  8 19:35:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 19:35:32 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue May  8 19:35:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue May  8 19:35:32 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue May  8 19:35:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue May  8 19:35:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 19:35:57 2012] Spatial fit model total counts = 22112.500000, observed total counts = 17949.000000
[Tue May  8 19:35:57 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  8 19:35:57 2012] Spatial fit model total counts = 31906.300000, observed total counts = 26635.000000
[Tue May  8 19:35:57 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  8 19:35:57 2012] Vigneting correction estimate = 1.000000
[Tue May  8 19:35:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 19:35:57 2012] Assessing source extent using major axis lower bound
[Tue May  8 19:35:57 2012] Source does appear to be extended
[Tue May  8 19:35:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 12:54:00 2012] Counts = 6317.240000, rescaling region sizes by 2.000000
[Fri May 11 12:54:00 2012] XMMSAS src. selection expression = ellipse(31707.971402, 29233.690800, 1379.568040, 1379.568040, 0.000000, X, Y)
[Fri May 11 12:54:00 2012] Writing source region out to fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src3_src.reg
[Fri May 11 12:54:00 2012] Extracting stamp from image fullrun_mos2_xmm0505310101_pi300-10000_cl_sm2.00.img.gz, (286, 257) - (444, 416)
[Fri May 11 12:54:00 2012] XMMSAS bgd. selection expression = annulus(31707.971402, 29233.690800, 4598.560132, 9197.120265, X, Y) && !ellipse(26434.296814, 23146.459869, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26615.933800, 23841.486000, 3484.656100, 3484.656100, 0.000000, X, Y) && !ellipse(31099.622000, 30158.495600, 1460.888042, 1460.888042, 0.000000, X, Y) && !ellipse(31810.035522, 30666.968414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31180.854645, 29636.270111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30184.459320, 30410.460724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30962.146000, 31685.697400, 578.145617, 578.145617, 0.000000, X, Y) && !ellipse(30243.646720, 31243.486600, 703.636820, 703.636820, 0.000000, X, Y) && !ellipse(32267.258000, 30163.604000, 319.440009, 319.440009, 0.000000, X, Y)
[Fri May 11 12:54:00 2012] Writing fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src3.gif
[Fri May 11 13:39:23 2012] Mean detx,y = (7503.53, 894.73) 
[Fri May 11 13:39:27 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 13:44:22 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 13:44:23 2012] Setting source spectrum file to fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 11 13:44:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 11 19:03:32 2012] Updating aperture counts using extracted products
[Fri May 11 19:03:32 2012] Error reading totcts from fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 11 19:03:33 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 11 19:03:33 2012] Using photon index=1.80, rate=0.0879, arf fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src3.arf
[Fri May 11 19:03:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 11 19:03:33 2012] Updating source flux to 1.6e-12
[Fri May 11 19:09:20 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Fri May 11 19:09:20 2012] Flag c found in src. 3 procflags, skipping spectral fitting