[Sun May  6 10:20:55 2012] Detection parameters:
  Position = (381.8, 251.6) = 5 25 7.63 -66 6 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.7 +/- 10.7
  Background counts = 26.8
  Rate = 0.001 +/- 0.0001

[Sun May  6 10:20:57 2012] Off-axis axis estimate = 6.93'
[Mon May  7 07:06:21 2012] Using EEF radius (= 9.89 ")to estimate initial spatial extent for simple fitting
[Mon May  7 07:06:21 2012] Initial guess for spatial extent in simple fitting = 9.89"
[Mon May  7 07:06:21 2012] source mask rpix=2.3, npix_max = 30, mask sum = 16, frac = 0.520
[Mon May  7 07:06:21 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 9.89"
[Mon May  7 12:28:37 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src31.ximg exists
[Mon May  7 12:28:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src31.csv
[Mon May  7 12:28:37 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon May  7 12:28:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src31.csv
[Mon May  7 12:28:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 12:28:38 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon May  7 12:28:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Mon May  7 12:28:38 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon May  7 12:28:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Mon May  7 12:28:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 12:29:25 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 14.010297 pixels away
[Mon May  7 12:29:25 2012] Vigneting correction estimate = 1.000000
[Mon May  7 12:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 12:29:25 2012] Assessing source extent using major
[Mon May  7 12:29:25 2012] Source does appear to be extended
[Mon May  7 12:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 12:29:25 2012] Deleting source due to low Poisson probability 0.8