[Sun May  6 10:20:52 2012] Detection parameters:
  Position = (434.2, 180.2) = 5 24 29.75 -66 11 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 305.5 +/- 23.1
  Background counts = 34.3
  Rate = 0.004 +/- 0.0003

[Sun May  6 10:20:57 2012] Off-axis axis estimate = 13.05'
[Mon May  7 07:06:21 2012] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Mon May  7 07:06:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 07:06:21 2012] Initial guess for spatial extent in simple fitting = 12.95"
[Mon May  7 07:06:21 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.013
[Mon May  7 07:06:21 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.95"
[Mon May  7 12:28:37 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src11.ximg exists
[Mon May  7 12:28:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src11.csv
[Mon May  7 12:28:37 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon May  7 12:28:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src11.csv
[Mon May  7 12:28:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 12:28:38 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon May  7 12:28:38 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon May  7 12:28:38 2012] Fit fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon May  7 12:29:25 2012] Warning, spatial fit 11 centroid is now closest to src. 12
[Mon May  7 12:29:25 2012] Vigneting correction estimate = 1.000000
[Mon May  7 12:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 12:29:25 2012] Assessing source extent using major
[Mon May  7 12:29:25 2012] Source does appear to be extended
[Mon May  7 12:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 16:34:51 2012] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Tue May  8 16:34:51 2012] Initial guess for spatial extent in simple fitting = 12.95"
[Tue May  8 16:34:51 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.013
[Tue May  8 16:34:51 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 12.95"
[Tue May  8 19:35:32 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src10.ximg exists
[Tue May  8 19:35:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src10.csv
[Tue May  8 19:35:32 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue May  8 19:35:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src10.csv
[Tue May  8 19:35:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 19:35:32 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue May  8 19:35:32 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue May  8 19:35:32 2012] Fit fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue May  8 19:35:57 2012] Spatial fit model total counts = 729.310000, observed total counts = 726.000000
[Tue May  8 19:35:57 2012] Offset between fit and detection position for source 10 = 0.404573 pixels
[Tue May  8 19:35:57 2012] 730.681000 total counts/ 523.642000 bgd. counts: snr = 9.047632
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.404573 pixels
  Position = (433.9, 180.5) = 5 24 29.98 -66 11 34.0
  Extent = 6.5 (5.5-7.8)", rotation angle = 0
  Source counts = 207.0 +/- 27.0
  Background counts = 523.6
  Rate = 0.003 +/- 0.0004
[Tue May  8 19:35:57 2012] Vigneting correction estimate = 1.000000
[Tue May  8 19:35:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 19:35:57 2012] Assessing source extent using major axis lower bound
[Tue May  8 19:35:57 2012] Source does appear to be extended
[Tue May  8 19:35:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 12:54:01 2012] XMMSAS src. selection expression = ellipse(37701.698560, 15654.147400, 391.643411, 391.643411, 0.000000, X, Y)
[Fri May 11 12:54:01 2012] Writing source region out to fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src10_src.reg
[Fri May 11 12:54:01 2012] Extracting stamp from image fullrun_mos2_xmm0505310101_pi300-10000_cl_sm2.00.img.gz, (411, 158) - (456, 203)
[Fri May 11 12:54:01 2012] XMMSAS bgd. selection expression = annulus(37701.698560, 15654.147400, 652.739019, 1305.478038, X, Y)
[Fri May 11 12:54:01 2012] Writing fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src10.gif
[Fri May 11 14:19:23 2012] Mean detx,y = (-819.62, 13867.35) 
[Fri May 11 14:19:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 14:19:53 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 14:19:54 2012] Setting source spectrum file to fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri May 11 14:19:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri May 11 19:03:33 2012] Updating aperture counts using extracted products
[Fri May 11 19:03:33 2012] Error reading totcts from fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri May 11 19:03:33 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 11 19:03:33 2012] Using photon index=1.80, rate=0.00288, arf fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src10.arf
[Fri May 11 19:03:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 11 19:03:33 2012] Updating source flux to 1.1e-13