[Sun May  6 10:20:50 2012] Detection parameters:
  Position = (304.4, 266.6) = 5 26 3.04 -66 5 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46881.2 +/- 245.3
  Background counts = 41.0
  Rate = 0.9 +/- 0.005

[Sun May  6 10:20:57 2012] Off-axis axis estimate = 2.35'
[Mon May  7 07:06:20 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Mon May  7 07:06:20 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Mon May  7 07:06:20 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.990
[Mon May  7 07:06:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.60"
[Mon May  7 12:28:37 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src1.ximg exists
[Mon May  7 12:28:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src1.csv
[Mon May  7 12:28:37 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May  7 12:28:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src1.csv
[Mon May  7 12:28:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 12:28:37 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May  7 12:28:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May  7 12:28:37 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May  7 12:28:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May  7 12:28:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 12:29:25 2012] Spatial fit model total counts = 136689.000000, observed total counts = 106542.000000
[Mon May  7 12:29:25 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  7 12:29:25 2012] Vigneting correction estimate = 1.000000
[Mon May  7 12:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 12:29:25 2012] Assessing source extent using major
[Mon May  7 12:29:25 2012] Source does appear to be extended
[Mon May  7 12:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 12:29:25 2012] Source is confused with source 2
[Tue May  8 16:34:51 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Tue May  8 16:34:51 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Tue May  8 16:34:51 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.990
[Tue May  8 16:34:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.60"
[Tue May  8 19:35:32 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src1.ximg exists
[Tue May  8 19:35:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src1.csv
[Tue May  8 19:35:32 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May  8 19:35:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src1.csv
[Tue May  8 19:35:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 19:35:32 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May  8 19:35:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May  8 19:35:32 2012] fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May  8 19:35:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May  8 19:35:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 19:35:57 2012] Spatial fit model total counts = 123861.000000, observed total counts = 106542.000000
[Tue May  8 19:35:57 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  8 19:35:57 2012] Vigneting correction estimate = 1.000000
[Tue May  8 19:35:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 19:35:57 2012] Assessing source extent using major
[Tue May  8 19:35:57 2012] Source does appear to be extended
[Tue May  8 19:35:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 12:54:00 2012] Counts = 46881.242188, rescaling region sizes by 3.000000
[Fri May 11 12:54:00 2012] XMMSAS src. selection expression = ellipse(26434.296814, 23146.459869, 1957.500000, 1957.500000, 0.000000, X, Y)
[Fri May 11 12:54:00 2012] Writing source region out to fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src1_src.reg
[Fri May 11 12:54:00 2012] Extracting stamp from image fullrun_mos2_xmm0505310101_pi300-10000_cl_sm2.00.img.gz, (192, 154) - (417, 379)
[Fri May 11 12:54:00 2012] XMMSAS bgd. selection expression = annulus(26434.296814, 23146.459869, 9787.500000, 19575.000000, X, Y) && !ellipse(26615.933800, 23841.486000, 3484.656100, 3484.656100, 0.000000, X, Y) && !ellipse(31707.971402, 29233.690800, 919.712026, 919.712026, 0.000000, X, Y) && !ellipse(31099.622000, 30158.495600, 1460.888042, 1460.888042, 0.000000, X, Y) && !ellipse(31810.035522, 30666.968414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31180.854645, 29636.270111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30184.459320, 30410.460724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30962.146000, 31685.697400, 578.145617, 578.145617, 0.000000, X, Y) && !ellipse(30243.646720, 31243.486600, 703.636820, 703.636820, 0.000000, X, Y) && !ellipse(32267.258000, 30163.604000, 319.440009, 319.440009, 0.000000, X, Y) && !ellipse(37701.698560, 15654.147400, 522.191215, 522.191215, 0.000000, X, Y) && !ellipse(17136.268723, 38285.394440, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 12:54:00 2012] Writing fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src1.gif
[Fri May 11 12:54:40 2012] Mean detx,y = (-305.38, 268.29) 
[Fri May 11 12:54:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 13:15:42 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 13:15:43 2012] Setting source spectrum file to fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 11 13:15:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 11 14:20:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 11 14:20:56 2012] rmf not generated due to insufficient counts
[Fri May 11 19:03:32 2012] Updating aperture counts using extracted products
[Fri May 11 19:03:32 2012] Error reading totcts from fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 11 19:03:33 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 11 19:03:33 2012] Using photon index=1.80, rate=0.881, arf fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src1.arf
[Fri May 11 19:03:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 11 19:03:33 2012] Updating source flux to 1.1e-11
[Fri May 11 19:09:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 11 19:13:38 2012] xmm0505310101/analysis//spectral/fullrun_mos2_xmm0505310101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete