[Sun May  6 10:20:44 2012] Detection parameters:
  Position = (348.4, 359.0) = 5 25 31.73 -65 58 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3210.4 +/- 72.3
  Background counts = 60.4
  Rate = 0.07 +/- 0.002

[Sun May  6 10:20:48 2012] Off-axis axis estimate = 5.69'
[Sun May  6 22:35:02 2012] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Sun May  6 22:35:02 2012] Initial guess for spatial extent in simple fitting = 9.27"
[Sun May  6 22:35:02 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.083
[Sun May  6 22:35:02 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.27"
[Mon May  7 07:06:20 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src11.ximg exists
[Mon May  7 07:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src11.csv
[Mon May  7 07:06:20 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon May  7 07:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src11.csv
[Mon May  7 07:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 07:06:20 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon May  7 07:06:20 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon May  7 07:06:20 2012] Fit fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon May  7 12:29:12 2012] Source 7 is offset by 8.534365 and -4.195074 pixels which is larger than
2 X fitted extent = 1.327756 x 1.327756, not incorporating fit results
[Mon May  7 12:29:12 2012] Vigneting correction estimate = 1.000000
[Mon May  7 12:29:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 12:29:12 2012] Assessing source extent using major
[Mon May  7 12:29:12 2012] Source does appear to be extended
[Mon May  7 12:29:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 12:29:12 2012] Source is confused with source 8
[Tue May  8 00:28:50 2012] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Tue May  8 00:28:50 2012] Initial guess for spatial extent in simple fitting = 9.27"
[Tue May  8 00:28:50 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.083
[Tue May  8 00:28:50 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 9.27"
[Tue May  8 16:34:50 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_src11.ximg exists
[Tue May  8 16:34:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_src11.csv
[Tue May  8 16:34:50 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue May  8 16:34:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_src11.csv
[Tue May  8 16:34:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 16:34:51 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue May  8 16:34:51 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue May  8 16:34:51 2012] Fit fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue May  8 19:35:51 2012] Spatial fit model total counts = 22374.100000, observed total counts = 19236.000000
[Tue May  8 19:35:51 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  8 19:35:51 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.547443 pixels away
[Tue May  8 19:35:51 2012] Vigneting correction estimate = 1.000000
[Tue May  8 19:35:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 19:35:51 2012] Assessing source extent using major
[Tue May  8 19:35:51 2012] Source does appear to be extended
[Tue May  8 19:35:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:43:44 2012] Counts = 3210.396484, rescaling region sizes by 2.000000
[Thu May 10 00:43:44 2012] XMMSAS src. selection expression = ellipse(30260.103760, 31183.618530, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu May 10 00:43:44 2012] Writing source region out to fullrun_mos1_xmm0505310101_pi300-10000_pass1_cl_src7_src.reg
[Thu May 10 00:43:44 2012] Extracting stamp from image fullrun_mos1_xmm0505310101_pi300-10000_cl_sm2.00.img.gz, (273, 284) - (423, 434)
[Thu May 10 00:43:44 2012] XMMSAS bgd. selection expression = annulus(30260.103760, 31183.618530, 4350.000000, 8700.000000, X, Y) && !ellipse(26690.354000, 23237.302000, 3817.872110, 3817.872110, 0.000000, X, Y) && !ellipse(26349.075986, 23676.549292, 3466.918904, 3189.380111, 100.910018, X, Y) && !ellipse(26476.645200, 23543.422000, 4553.904131, 4553.904131, 0.000000, X, Y) && !ellipse(32054.664000, 29499.665800, 3548.952102, 3548.952102, -0.000000, X, Y) && !ellipse(31878.638000, 30769.794000, 1500.456043, 1500.456043, 0.000000, X, Y) && !ellipse(30873.781921, 30040.426636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31038.292600, 31650.810400, 696.817620, 696.817620, 0.000000, X, Y) && !ellipse(31461.193878, 30313.990234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30158.063019, 30116.663147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30335.785370, 30543.103333, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 10 00:43:44 2012] Writing fullrun_mos1_xmm0505310101_pi300-10000_pass1_cl_src7.gif
[Thu May 10 03:07:18 2012] Mean detx,y = (-216.03, -8086.78) 
[Thu May 10 03:07:24 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 10 03:12:10 2012] Binned source spectrum to 10 counts/bin
[Thu May 10 03:12:11 2012] Setting source spectrum file to fullrun_mos1_xmm0505310101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 10 03:12:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505310101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri May 11 12:39:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 11 12:39:43 2012] rmf not generated due to insufficient counts
[Fri May 11 19:03:31 2012] Updating aperture counts using extracted products
[Fri May 11 19:03:31 2012] Error reading totcts from fullrun_mos1_xmm0505310101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri May 11 19:03:32 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 11 19:03:32 2012] Using photon index=1.80, rate=0.0724, arf fullrun_mos1_xmm0505310101_pi300-10000_pass1_cl_src7.arf
[Fri May 11 19:03:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 11 19:03:32 2012] Updating source flux to 1.2e-12
[Fri May 11 19:03:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting