[Sun May  6 10:20:46 2012] Detection parameters:
  Position = (381.4, 251.9) = 5 25 7.90 -66 6 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.9 +/- 11.0
  Background counts = 29.9
  Rate = 0.002 +/- 0.0003

[Sun May  6 10:20:48 2012] Off-axis axis estimate = 6.90'
[Sun May  6 22:35:02 2012] Using EEF radius (= 9.88 ")to estimate initial spatial extent for simple fitting
[Sun May  6 22:35:02 2012] Initial guess for spatial extent in simple fitting = 9.88"
[Sun May  6 22:35:02 2012] source mask rpix=2.3, npix_max = 30, mask sum = 23, frac = 0.749
[Sun May  6 22:35:02 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 9.88"
[Mon May  7 07:06:20 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src20.ximg exists
[Mon May  7 07:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src20.csv
[Mon May  7 07:06:20 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon May  7 07:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src20.csv
[Mon May  7 07:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 07:06:20 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon May  7 07:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon May  7 07:06:20 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon May  7 07:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon May  7 07:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 12:29:12 2012] Spatial fit model total counts = 360.362000, observed total counts = 216.000000
[Mon May  7 12:29:12 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  7 12:29:12 2012] Vigneting correction estimate = 1.000000
[Mon May  7 12:29:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 12:29:12 2012] Assessing source extent using major
[Mon May  7 12:29:12 2012] Source does appear to be extended
[Mon May  7 12:29:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 12:29:12 2012] Deleting source due to low Poisson probability 0.7