[Sun May  6 10:20:44 2012] Detection parameters:
  Position = (306.7, 267.0) = 5 26 1.41 -66 5 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62322.2 +/- 288.6
  Background counts = 38.9
  Rate = 1 +/- 0.005

[Sun May  6 10:20:48 2012] Off-axis axis estimate = 2.36'
[Sun May  6 22:35:02 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Sun May  6 22:35:02 2012] Initial guess for spatial extent in simple fitting = 7.61"
[Sun May  6 22:35:02 2012] source mask rpix=1.7, npix_max = 20, mask sum = 17, frac = 0.841
[Sun May  6 22:35:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.61"
[Mon May  7 07:06:19 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src1.ximg exists
[Mon May  7 07:06:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src1.csv
[Mon May  7 07:06:19 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May  7 07:06:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src1.csv
[Mon May  7 07:06:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 07:06:20 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May  7 07:06:20 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May  7 07:06:20 2012] Fit fullrun_mos1_xmm0505310101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May  7 12:29:12 2012] Spatial fit model total counts = 150533.000000, observed total counts = 148284.000000
[Mon May  7 12:29:12 2012] Offset between fit and detection position for source 1 = 2.398483 pixels
[Mon May  7 12:29:12 2012] 157308.000000 total counts/ 25600.000000 bgd. counts: snr = 823.175000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.398483 pixels
  Position = (305.3, 269.0) = 5 26 2.41 -66 5 11.0
  Extent = 15.2 (15.2-30.4)", rotation angle = 0
  Source counts = 131708.0 +/- 396.6
  Background counts = 25600.0
  Rate = 2 +/- 0.006
[Mon May  7 12:29:12 2012] Vigneting correction estimate = 1.000000
[Mon May  7 12:29:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 12:29:12 2012] Assessing source extent using major axis lower bound
[Mon May  7 12:29:12 2012] Source does appear to be extended
[Mon May  7 12:29:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 12:29:12 2012] Source is confused with source 2
[Mon May  7 12:29:12 2012] Source is confused with source 3
[Tue May  8 00:28:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 00:28:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  8 00:28:50 2012] Initial guess for spatial extent in simple fitting = 15.21"
[Tue May  8 00:28:50 2012] source mask rpix=3.5, npix_max = 63, mask sum = 46, frac = 0.720
[Tue May  8 00:28:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 15.21"
[Tue May  8 16:34:50 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_src1.ximg exists
[Tue May  8 16:34:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_src1.csv
[Tue May  8 16:34:50 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May  8 16:34:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_src1.csv
[Tue May  8 16:34:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 16:34:51 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May  8 16:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May  8 16:34:51 2012] fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May  8 16:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May  8 16:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505310101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 19:35:51 2012] Warning, spatial fit 1 centroid is now closest to src. 10
[Tue May  8 19:35:51 2012] Spatial fit model total counts = 182330.000000, observed total counts = 175651.000000
[Tue May  8 19:35:51 2012] Offset between fit and detection position for source 1 = 2.437588 pixels
[Tue May  8 19:35:51 2012] Warning, changing simple spatial fit ID from 1 to 2
[Tue May  8 19:35:51 2012] 92675.600000 total counts/ 21068.200000 bgd. counts: snr = 493.337568
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.437588 pixels
  Position = (307.3, 267.7) = 5 26 0.94 -66 5 16.7
  Extent = 15.9 (15.5-16.4)", rotation angle = 0
  Source counts = 71607.4 +/- 304.4
  Background counts = 21068.2
  Rate = 1 +/- 0.004
[Tue May  8 19:35:51 2012] Vigneting correction estimate = 1.000000
[Tue May  8 19:35:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 19:35:51 2012] Assessing source extent using major axis lower bound
[Tue May  8 19:35:51 2012] Source does appear to be extended
[Tue May  8 19:35:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:43:43 2012] Counts = 71607.400000, rescaling region sizes by 3.000000
[Thu May 10 00:43:43 2012] XMMSAS src. selection expression = ellipse(26690.354000, 23237.302000, 2863.404082, 2863.404082, 0.000000, X, Y)
[Thu May 10 00:43:43 2012] Writing source region out to fullrun_mos1_xmm0505310101_pi300-10000_pass1_cl_src1_src.reg
[Thu May 10 00:43:43 2012] Extracting stamp from image fullrun_mos1_xmm0505310101_pi300-10000_cl_sm2.00.img.gz, (143, 103) - (472, 432)
[Thu May 10 00:43:43 2012] XMMSAS bgd. selection expression = annulus(26690.354000, 23237.302000, 14317.020412, 28634.040824, X, Y) && !ellipse(26349.075986, 23676.549292, 3466.918904, 3189.380111, 100.910018, X, Y) && !ellipse(26476.645200, 23543.422000, 4553.904131, 4553.904131, 0.000000, X, Y) && !ellipse(32054.664000, 29499.665800, 3548.952102, 3548.952102, -0.000000, X, Y) && !ellipse(31878.638000, 30769.794000, 1500.456043, 1500.456043, 0.000000, X, Y) && !ellipse(30873.781921, 30040.426636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31038.292600, 31650.810400, 696.817620, 696.817620, 0.000000, X, Y) && !ellipse(31461.193878, 30313.990234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30158.063019, 30116.663147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30335.785370, 30543.103333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30260.103760, 31183.618530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37690.308000, 15631.836000, 522.901615, 522.901615, 0.000000, X, Y) && !ellipse(39093.312000, 16641.968000, 2091.608060, 2091.608060, 0.000000, X, Y)
[Thu May 10 00:43:43 2012] Writing fullrun_mos1_xmm0505310101_pi300-10000_pass1_cl_src1.gif
[Thu May 10 00:44:36 2012] Mean detx,y = (441.93, 178.23) 
[Thu May 10 00:44:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 10 01:14:08 2012] Binned source spectrum to 10 counts/bin
[Thu May 10 01:14:11 2012] Setting source spectrum file to fullrun_mos1_xmm0505310101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 10 01:14:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505310101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 11 19:03:30 2012] Updating aperture counts using extracted products
[Fri May 11 19:03:30 2012] Error reading totcts from fullrun_mos1_xmm0505310101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 11 19:03:31 2012] No arf file for this source, not re-computing flux
[Fri May 11 19:03:35 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri May 11 19:03:35 2012] Source 1 has no response, skipping
[Fri May 11 19:09:20 2012] xmm0505310101/analysis//spectral/fullrun_mos1_xmm0505310101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete