[Sun Dec 25 23:06:07 2011] Detection parameters:
  Position = (291.6, 289.0) = 16 47 7.56 -45 51 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.2 +/- 15.9
  Background counts = 92.1
  Rate = 0.004 +/- 0.0007

[Sun Dec 25 23:06:07 2011] Off-axis axis estimate = 0.84'
[Mon Dec 26 07:36:56 2011] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 07:36:56 2011] Initial guess for spatial extent in simple fitting = 6.85"
[Mon Dec 26 07:36:56 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.929
[Mon Dec 26 07:36:56 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 6.85"
[Mon Dec 26 09:27:07 2011] fullrun_mos2_xmm0505290301_pi300-10000_cl_pass0_src11.ximg exists
[Mon Dec 26 09:27:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505290301_pi300-10000_cl_pass0_src11.csv
[Mon Dec 26 09:27:07 2011] fullrun_mos2_xmm0505290301_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Dec 26 09:27:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505290301_pi300-10000_cl_pass0_src11.csv
[Mon Dec 26 09:27:07 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505290301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505290301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 09:27:07 2011] fullrun_mos2_xmm0505290301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Dec 26 09:27:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505290301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Dec 26 09:27:07 2011] fullrun_mos2_xmm0505290301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Dec 26 09:27:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505290301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Dec 26 09:27:07 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505290301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505290301_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 09:27:30 2011] Spatial fit model total counts = 804.790000, observed total counts = 1039.000000
[Mon Dec 26 09:27:30 2011] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Dec 26 09:27:30 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 09:27:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 09:27:30 2011] Assessing source extent using major
[Mon Dec 26 09:27:30 2011] Source does appear to be extended
[Mon Dec 26 09:27:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 17:28:59 2011] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 17:28:59 2011] Initial guess for spatial extent in simple fitting = 6.85"
[Mon Dec 26 17:28:59 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.929
[Mon Dec 26 17:28:59 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 6.85"
[Mon Dec 26 19:27:37 2011] fullrun_mos2_xmm0505290301_pi300-10000_cl_pass1_src11.ximg exists
[Mon Dec 26 19:27:37 2011] fullrun_mos2_xmm0505290301_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Dec 26 19:27:37 2011] Fit fullrun_mos2_xmm0505290301_pi300-10000_cl_pass1_src11 appears to have run properly
[Mon Dec 26 19:27:37 2011] fullrun_mos2_xmm0505290301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Dec 26 19:27:37 2011] fullrun_mos2_xmm0505290301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Dec 26 19:27:37 2011] Fit fullrun_mos2_xmm0505290301_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Dec 26 19:27:57 2011] Source 13 is offset by 6.918633 and 5.295084 pixels which is larger than
2 X fitted extent = 6.273839 x 6.273839, not incorporating fit results
[Mon Dec 26 19:27:57 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 19:27:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 19:27:57 2011] Assessing source extent using major
[Mon Dec 26 19:27:57 2011] Source does appear to be extended
[Mon Dec 26 19:27:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 22:52:45 2011] XMMSAS src. selection expression = ellipse(25322.405060, 25094.120331, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 22:52:45 2011] Writing source region out to fullrun_mos2_xmm0505290301_pi300-10000_pass1_cl_src13_src.reg
[Mon Dec 26 22:52:45 2011] Extracting stamp from image fullrun_mos2_xmm0505290301_pi300-10000_cl_sm2.00.img.gz, (254, 251) - (329, 326)
[Mon Dec 26 22:52:45 2011] XMMSAS bgd. selection expression = annulus(25322.405060, 25094.120331, 1087.500000, 2175.000000, X, Y) && !ellipse(24785.915600, 24227.110000, 413.895212, 413.895212, 0.000000, X, Y)
[Mon Dec 26 22:52:45 2011] Writing fullrun_mos2_xmm0505290301_pi300-10000_pass1_cl_src13.gif
[Mon Dec 26 23:26:30 2011] Mean detx,y = (540.90, -623.41) 
[Mon Dec 26 23:26:34 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 23:27:35 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 23:27:36 2011] Setting source spectrum file to fullrun_mos2_xmm0505290301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Dec 26 23:27:36 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505290301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon Dec 26 23:55:02 2011] Not generating rmf since there are only 90 counts
[Mon Dec 26 23:55:02 2011] rmf not generated due to insufficient counts
[Mon Dec 26 23:57:08 2011] Updating aperture counts using extracted products
[Mon Dec 26 23:57:08 2011] Error reading totcts from fullrun_mos2_xmm0505290301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Dec 26 23:57:09 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 23:57:09 2011] Using photon index=1.80, rate=0.00408, arf fullrun_mos2_xmm0505290301_pi300-10000_pass1_cl_src13.arf
[Mon Dec 26 23:57:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 23:57:09 2011] Updating source flux to 4.8e-14
[Tue Dec 27 00:03:12 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting