[Sat Feb 11 14:01:01 2012] Detection parameters:
  Position = (427.9, 464.1) = 16 46 21.78 -45 41 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2932.0 +/- 69.7
  Background counts = 46.5
  Rate = 0.09 +/- 0.002

[Sat Feb 11 14:01:02 2012] Off-axis axis estimate = 15.24'
[Sat Feb 11 14:40:09 2012] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 14:40:09 2012] Initial guess for spatial extent in simple fitting = 14.05"
[Sat Feb 11 14:40:09 2012] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.150
[Sat Feb 11 14:40:09 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 14.05"
[Sat Feb 11 16:26:23 2012] fullrun_mos2_xmm0505290201_pi300-10000_cl_pass0_src3.ximg exists
[Sat Feb 11 16:26:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505290201_pi300-10000_cl_pass0_src3.csv
[Sat Feb 11 16:26:23 2012] fullrun_mos2_xmm0505290201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Feb 11 16:26:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505290201_pi300-10000_cl_pass0_src3.csv
[Sat Feb 11 16:26:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505290201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505290201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 16:26:23 2012] fullrun_mos2_xmm0505290201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Feb 11 16:26:23 2012] fullrun_mos2_xmm0505290201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Feb 11 16:26:23 2012] Fit fullrun_mos2_xmm0505290201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Feb 11 16:26:30 2012] Warning, spatial fit 3 centroid is now closest to src. 13
[Sat Feb 11 16:26:30 2012] Spatial fit model total counts = 1893.630000, observed total counts = 1897.000000
[Sat Feb 11 16:26:30 2012] Offset between fit and detection position for source 4 = 1.287169 pixels
[Sat Feb 11 16:26:30 2012] Warning, changing simple spatial fit ID from 3 to 5
[Sat Feb 11 16:26:30 2012] 1907.000000 total counts/ 1428.270000 bgd. counts: snr = 12.667342
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.287169 pixels
  Position = (427.9, 462.8) = 16 46 21.81 -45 41 49.8
  Extent = 5.1 (4.5-5.6)", rotation angle = 0
  Source counts = 478.7 +/- 43.7
  Background counts = 1428.3
  Rate = 0.02 +/- 0.001
[Sat Feb 11 16:26:30 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 16:26:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 16:26:30 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 16:26:30 2012] Source does appear to be extended
[Sat Feb 11 16:26:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 17:05:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 17:05:41 2012] Initial guess for spatial extent in simple fitting = 5.06"
[Sat Feb 11 17:05:41 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.084
[Sat Feb 11 17:05:41 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.06"
[Sat Feb 11 17:57:13 2012] fullrun_mos2_xmm0505290201_pi300-10000_cl_pass1_src3.ximg exists
[Sat Feb 11 17:57:13 2012] fullrun_mos2_xmm0505290201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Feb 11 17:57:13 2012] Fit fullrun_mos2_xmm0505290201_pi300-10000_cl_pass1_src3 appears to have run properly
[Sat Feb 11 17:57:13 2012] fullrun_mos2_xmm0505290201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Feb 11 17:57:13 2012] fullrun_mos2_xmm0505290201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Feb 11 17:57:13 2012] Fit fullrun_mos2_xmm0505290201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Feb 11 17:57:18 2012] Spatial fit model total counts = 3804.050000, observed total counts = 3805.000000
[Sat Feb 11 17:57:18 2012] Offset between fit and detection position for source 4 = 2.626086 pixels
[Sat Feb 11 17:57:18 2012] 3824.590000 total counts/ 1142.900000 bgd. counts: snr = 79.323973
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.626086 pixels
  Position = (427.8, 465.4) = 16 46 21.83 -45 41 38.4
  Extent = 10.1 (10.1-20.2)", rotation angle = 0
  Source counts = 2681.7 +/- 61.8
  Background counts = 1142.9
  Rate = 0.09 +/- 0.002
[Sat Feb 11 17:57:18 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 17:57:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 17:57:18 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 17:57:18 2012] Source does appear to be extended
[Sat Feb 11 17:57:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 18:38:08 2012] Counts = 2681.690000, rescaling region sizes by 2.000000
[Sat Feb 11 18:38:08 2012] XMMSAS src. selection expression = ellipse(37172.544780, 40442.534400, 1214.508035, 1214.508035, 0.000000, X, Y)
[Sat Feb 11 18:38:08 2012] Writing source region out to fullrun_mos2_xmm0505290201_pi300-10000_pass1_cl_src4_src.reg
[Sat Feb 11 18:38:08 2012] Extracting stamp from image fullrun_mos2_xmm0505290201_pi300-10000_cl_sm2.00.img.gz, (358, 396) - (498, 535)
[Sat Feb 11 18:38:08 2012] XMMSAS bgd. selection expression = annulus(37172.544780, 40442.534400, 4048.360116, 8096.720233, X, Y) && !ellipse(39362.591603, 38459.182200, 828.232024, 366.223211, 333.512000, X, Y) && !ellipse(38507.872620, 38504.272400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38084.392792, 39553.616974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39690.149200, 38992.842926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38108.710205, 40304.655731, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Feb 11 18:38:08 2012] Writing fullrun_mos2_xmm0505290201_pi300-10000_pass1_cl_src4.gif
[Sat Feb 11 18:40:31 2012] Mean detx,y = (-9910.48, 12971.37) 
[Sat Feb 11 18:40:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 11 18:41:38 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 11 18:41:38 2012] Setting source spectrum file to fullrun_mos2_xmm0505290201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Feb 11 18:41:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505290201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Feb 11 18:56:43 2012] Updating aperture counts using extracted products
[Sat Feb 11 18:56:43 2012] Error reading totcts from fullrun_mos2_xmm0505290201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Feb 11 18:56:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 18:56:43 2012] Using photon index=1.80, rate=0.0862, arf fullrun_mos2_xmm0505290201_pi300-10000_pass1_cl_src4.arf
[Sat Feb 11 18:56:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 11 18:56:43 2012] Updating source flux to 2.4e-12