[Fri Jun 14 10:15:39 2013] Detection parameters:
  Position = (454.3, 213.0) = 18 18 42.84 -15 2 52.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.4 +/- 28.3
  Background counts = 257.9
  Rate = 0.002 +/- 0.0004

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 12.88'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 12.87 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 12.87"
[Fri Jun 14 10:16:28 2013] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.878
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 96 for pass 0, mean size = 12.87"
[Fri Jun 14 10:16:32 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src96.ximg exists
[Fri Jun 14 10:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src96.csv
[Fri Jun 14 10:16:32 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src96_1.ximg exists
[Fri Jun 14 10:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src96.csv
[Fri Jun 14 10:16:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:34 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Fri Jun 14 10:16:34 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Fri Jun 14 10:16:34 2013] Fit fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src96 appears to have run properly
[Fri Jun 14 10:17:05 2013] Warning, spatial fit 96 centroid is now closest to src. 16
[Fri Jun 14 10:17:05 2013] Spatial fit model total counts = 2423.240000, observed total counts = 2417.000000
[Fri Jun 14 10:17:05 2013] Offset between fit and detection position for source 98 = 0.309830 pixels
[Fri Jun 14 10:17:05 2013] Warning, changing simple spatial fit ID from 96 to 99
[Fri Jun 14 10:17:05 2013] 2279.670000 total counts/ 1044.180000 bgd. counts: snr = 38.234160
Spatial fit parameters:
  Offset between fit and detection position for source 98 = 0.309830 pixels
  Position = (454.0, 213.0) = 18 18 42.93 -15 2 54.8
  Extent = 26.2 (26.2-52.4)", rotation angle = 0
  Source counts = 1235.5 +/- 47.7
  Background counts = 1044.2
  Rate = 0.02 +/- 0.0008
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:05 2013] Source is confused with source 18
[Fri Jun 14 10:17:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 26.21"
[Fri Jun 14 10:17:54 2013] source mask rpix=6.0, npix_max = 170, mask sum = 182, frac = 1.068
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 90 for pass 1, mean size = 26.21"
[Fri Jun 14 10:17:56 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src90.ximg exists
[Fri Jun 14 10:17:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src90.csv
[Fri Jun 14 10:17:56 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src90_1.ximg exists
[Fri Jun 14 10:17:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src90.csv
[Fri Jun 14 10:17:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src90_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:59 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src90.ximg exists
[Fri Jun 14 10:17:59 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src90_1.ximg exists
[Fri Jun 14 10:17:59 2013] Fit fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src90 appears to have run properly
[Fri Jun 14 10:18:29 2013] Warning, spatial fit 90 centroid is now closest to src. 115
[Fri Jun 14 10:18:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:30 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:30 2013] Source does appear to be extended
[Fri Jun 14 10:18:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:23 2013] Counts = 1235.490000, rescaling region sizes by 2.000000
[Fri Jun 14 10:19:23 2013] XMMSAS src. selection expression = ellipse(39446.804000, 18480.571400, 3145.500091, 3145.500091, 0.000000, X, Y)
[Fri Jun 14 10:19:23 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src98_src.reg
[Fri Jun 14 10:19:23 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (273, 32) - (595, 394)
[Fri Jun 14 10:19:23 2013] XMMSAS bgd. selection expression = annulus(39446.804000, 18480.571400, 10485.000302, 20970.000603, X, Y) && !ellipse(33879.018800, 20818.320000, 1642.912047, 1642.912047, 0.000000, X, Y) && !ellipse(24602.151400, 24310.524200, 430.472877, 430.472877, 0.000000, X, Y) && !ellipse(19305.152600, 28892.079000, 418.364812, 418.364812, 0.000000, X, Y) && !ellipse(38073.254944, 19796.050522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33984.706299, 19536.095276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38560.092000, 19626.746200, 2009.712058, 2009.712058, 0.000000, X, Y) && !ellipse(41450.021000, 19189.797600, 994.168029, 994.168029, 0.000000, X, Y) && !ellipse(34081.086000, 18932.740000, 1779.504051, 1779.504051, 0.000000, X, Y) && !ellipse(37052.799744, 17181.752029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34486.263473, 17859.378310, 874.464025, 874.464025, 357.246440, X, Y) && !ellipse(36145.316040, 17092.108948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26110.367600, 31488.635600, 437.964013, 437.964013, 0.000000, X, Y) && !ellipse(33264.059560, 19561.942200, 437.898413, 437.898413, 0.000000, X, Y) && !ellipse(40844.316000, 19272.015000, 793.888823, 793.888823, 0.000000, X, Y) && !ellipse(41599.990000, 18121.177800, 449.611213, 449.611213, 0.000000, X, Y) && !ellipse(42482.544000, 17987.510800, 704.854420, 704.854420, 0.000000, X, Y) && !ellipse(37856.962982, 17960.152191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35576.226440, 17701.540390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17651.862137, 38372.205933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24129.941132, 37881.752991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28173.359589, 36801.243683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18143.680000, 36866.098000, 1033.056030, 1033.056030, 0.000000, X, Y) && !ellipse(18416.663239, 36405.392090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32380.670349, 35949.536835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18731.489975, 35613.728729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17947.828873, 34638.186005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19570.634000, 34189.024000, 744.143221, 744.143221, 0.000000, X, Y) && !ellipse(33555.284515, 34106.094238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18102.852051, 34231.387726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18900.876862, 33664.483215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19714.184700, 33678.933000, 338.800810, 338.800810, 0.000000, X, Y) && !ellipse(22480.076721, 33560.021088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18401.273800, 33502.669000, 858.104025, 858.104025, 0.000000, X, Y) && !ellipse(18141.916824, 32674.077637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26359.034698, 32285.537994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29276.826935, 31443.914948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25323.829200, 30739.101800, 383.100011, 383.100011, 0.000000, X, Y) && !ellipse(22227.470000, 29893.560000, 1348.320039, 1348.320039, 0.000000, X, Y) && !ellipse(29084.132874, 29721.095642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22653.678467, 29431.782410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23161.505920, 28922.067230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26618.170868, 28633.202698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23576.408000, 28399.200000, 339.450410, 339.450410, 0.000000, X, Y) && !ellipse(23858.422000, 27859.620000, 1255.760036, 1255.760036, 0.000000, X, Y) && !ellipse(24249.956112, 27701.690471, 1150.264033, 253.804676, 54.615789, X, Y) && !ellipse(23436.404620, 27739.685800, 359.553610, 359.553610, 0.000000, X, Y) && !ellipse(24750.322000, 27177.634000, 653.230419, 653.230419, 0.000000, X, Y) && !ellipse(25401.372000, 26505.276000, 1116.464032, 1116.464032, 0.000000, X, Y) && !ellipse(24640.092000, 27121.216000, 2231.456064, 2231.456064, 0.000000, X, Y) && !ellipse(25816.608000, 26224.071000, 435.801613, 435.801613, 0.000000, X, Y) && !ellipse(26238.204315, 25855.893372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.981171, 25549.210938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40389.460022, 25392.423492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27453.958160, 24814.853729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19541.964218, 24665.521606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27966.713348, 24488.200165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29176.108398, 23701.947754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29695.623291, 23483.643280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37162.955800, 23493.046400, 962.344028, 962.344028, 0.000000, X, Y) && !ellipse(35329.406952, 23300.024109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30555.364258, 22777.057678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38103.583344, 22252.739838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31655.234600, 21558.342000, 1694.296049, 1694.296049, 0.000000, X, Y) && !ellipse(35049.808472, 21880.269760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34617.967957, 22043.726639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32937.368927, 21618.741409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38809.706970, 20756.012207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36146.298401, 20391.496597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21778.300705, 20653.836060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35706.070648, 20482.712784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25897.998800, 15744.591600, 383.950435, 383.950435, 0.000000, X, Y) && !ellipse(37359.620239, 20037.775009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39183.484650, 19547.429596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35602.431580, 19261.913055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36804.360687, 19174.005035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38050.756226, 18752.277527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38700.232400, 18644.081600, 592.637617, 592.637617, 0.000000, X, Y) && !ellipse(35531.526367, 18202.272278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41766.586548, 15891.340088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41425.306000, 18162.184880, 2182.520063, 364.921611, 0.000000, X, Y) && !ellipse(39206.323212, 17763.518066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39622.828278, 17637.015213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41727.791260, 17349.062683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41211.863312, 17427.812180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24066.154053, 17252.756805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37840.196472, 17463.515686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31448.526733, 16924.431900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21784.805527, 16560.595978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42297.486206, 16256.376083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23188.534119, 38793.097107, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 10:19:23 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src98.gif
[Fri Jun 14 11:12:05 2013] Mean detx,y = (-14624.61, -5304.19) 
[Fri Jun 14 11:12:16 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 11:18:06 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 11:18:07 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Fri Jun 14 11:18:07 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src98_bgd.pi.gz
[Sun Jun 16 10:49:41 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:41 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src98_src_b10.pi.gz = 33874.00
[Sun Jun 16 10:49:42 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src98_bgd.pi.gz = 169093.00
[Sun Jun 16 10:49:42 2013] Got source and background scale factors 30055930.000000, 286549277.000000
[Sun Jun 16 10:49:42 2013] User source parameters:
  Position = (454.0, 213.0) = 18 18 42.93 -15 2 54.8
  Extent = 26.2 (26.2-52.4)", rotation angle = 0
  Source aperture counts = 16138.0 +/- 185.1
  Background aperture counts = 17736.0
  Rate = 0.3 +/- 0.003

[Sun Jun 16 10:49:55 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:55 2013] Using photon index=1.80, rate=0.0207, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src98.arf
[Sun Jun 16 10:49:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:55 2013] Updating source flux to 3.2e-13
[Sun Jun 16 10:52:29 2013] Flag c found in src. 98 procflags, skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src98_pl.csv not found, spectral fit skipped or did not complete