[Fri Jun 14 10:15:39 2013] Detection parameters:
  Position = (429.0, 219.0) = 18 18 50.45 -15 2 30.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.0 +/- 28.3
  Background counts = 315.1
  Rate = 0.002 +/- 0.0004

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 11.08'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 11.97"
[Fri Jun 14 10:16:28 2013] source mask rpix=2.8, npix_max = 42, mask sum = 30, frac = 0.710
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 95 for pass 0, mean size = 11.97"
[Fri Jun 14 10:16:32 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src95.ximg exists
[Fri Jun 14 10:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src95.csv
[Fri Jun 14 10:16:32 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src95_1.ximg exists
[Fri Jun 14 10:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src95.csv
[Fri Jun 14 10:16:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:34 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Fri Jun 14 10:16:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src95.csv
[Fri Jun 14 10:16:34 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Fri Jun 14 10:16:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src95.csv
[Fri Jun 14 10:16:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src95_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:04 2013] Spatial fit model total counts = 3336.970000, observed total counts = 3417.000000
[Fri Jun 14 10:17:04 2013] Offset between fit and detection position for source 97 = 3.038807 pixels
[Fri Jun 14 10:17:04 2013] Warning, changing simple spatial fit ID from 95 to 6
[Fri Jun 14 10:17:04 2013] 2664.551700 total counts/ 2623.150000 bgd. counts: snr = 0.808363
Spatial fit parameters:
  Offset between fit and detection position for source 97 = 3.038807 pixels
  Position = (426.4, 217.4) = 18 18 51.22 -15 2 35.8
  Extent = 24.2" x 24.2", rotation angle = 0
  Source counts = 41.4 +/- 51.6
  Background counts = 2623.2
  Rate = 0.0007 +/- 0.0009
  Deleting source due to low Poisson probability