[Fri Jun 14 10:15:39 2013] Detection parameters:
  Position = (430.0, 230.9) = 18 18 50.14 -15 1 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 395.4 +/- 31.7
  Background counts = 302.6
  Rate = 0.005 +/- 0.0004

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 10.72'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 11.79"
[Fri Jun 14 10:16:28 2013] source mask rpix=2.7, npix_max = 41, mask sum = 28, frac = 0.679
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 91 for pass 0, mean size = 11.79"
[Fri Jun 14 10:16:32 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src91.ximg exists
[Fri Jun 14 10:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src91.csv
[Fri Jun 14 10:16:32 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src91_1.ximg exists
[Fri Jun 14 10:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src91.csv
[Fri Jun 14 10:16:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:34 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src91.ximg exists
[Fri Jun 14 10:16:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src91.csv
[Fri Jun 14 10:16:34 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists
[Fri Jun 14 10:16:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src91.csv
[Fri Jun 14 10:16:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src91_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:05 2013] Source 93 is offset by 3.853152 and -1.949138 pixels which is larger than
2 X fitted extent = 1.297885 x 1.297885, not incorporating fit results
[Fri Jun 14 10:17:05 2013] Warning, spatial fit 91 centroid is now closest to src. 88
[Fri Jun 14 10:17:05 2013] Source 93 is offset by -4.339767 and -1.441437 pixels which is larger than
2 X fitted extent = 1.352271 x 1.352271, not incorporating fit results
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:05 2013] Source is confused with source 8
[Fri Jun 14 10:17:54 2013] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 11.79"
[Fri Jun 14 10:17:54 2013] source mask rpix=2.7, npix_max = 41, mask sum = 28, frac = 0.679
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 86 for pass 1, mean size = 11.79"
[Fri Jun 14 10:17:56 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src86.ximg exists
[Fri Jun 14 10:17:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src86.csv
[Fri Jun 14 10:17:56 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src86_1.ximg exists
[Fri Jun 14 10:17:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src86.csv
[Fri Jun 14 10:17:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:59 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src86.ximg exists
[Fri Jun 14 10:17:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src86.csv
[Fri Jun 14 10:17:59 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src86_1.ximg exists
[Fri Jun 14 10:17:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src86.csv
[Fri Jun 14 10:17:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:29 2013] Warning, spatial fit 86 centroid is now closest to src. 99
[Fri Jun 14 10:18:29 2013] Source 93 is offset by 3.788853 and 3.066264 pixels which is larger than
2 X fitted extent = 1.413807 x 1.413807, not incorporating fit results
[Fri Jun 14 10:18:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:30 2013] Assessing source extent using major
[Fri Jun 14 10:18:30 2013] Source does appear to be extended
[Fri Jun 14 10:18:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:22 2013] XMMSAS src. selection expression = ellipse(37359.620239, 20037.775009, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 10:19:22 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src93_src.reg
[Fri Jun 14 10:19:22 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (392, 193) - (467, 268)
[Fri Jun 14 10:19:22 2013] XMMSAS bgd. selection expression = annulus(37359.620239, 20037.775009, 1087.500000, 2175.000000, X, Y) && !ellipse(33879.018800, 20818.320000, 1642.912047, 1642.912047, 0.000000, X, Y) && !ellipse(38073.254944, 19796.050522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38560.092000, 19626.746200, 2009.712058, 2009.712058, 0.000000, X, Y) && !ellipse(34081.086000, 18932.740000, 1779.504051, 1779.504051, 0.000000, X, Y) && !ellipse(37052.799744, 17181.752029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34486.263473, 17859.378310, 874.464025, 874.464025, 357.246440, X, Y) && !ellipse(36145.316040, 17092.108948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37856.962982, 17960.152191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35576.226440, 17701.540390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38103.583344, 22252.739838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35049.808472, 21880.269760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34617.967957, 22043.726639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38809.706970, 20756.012207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36146.298401, 20391.496597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35706.070648, 20482.712784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39183.484650, 19547.429596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35602.431580, 19261.913055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36804.360687, 19174.005035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39446.804000, 18480.571400, 2097.000060, 2097.000060, 0.000000, X, Y) && !ellipse(38050.756226, 18752.277527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38700.232400, 18644.081600, 592.637617, 592.637617, 0.000000, X, Y) && !ellipse(35531.526367, 18202.272278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41425.306000, 18162.184880, 2182.520063, 364.921611, 0.000000, X, Y) && !ellipse(39206.323212, 17763.518066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39622.828278, 17637.015213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37840.196472, 17463.515686, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 10:19:22 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src93.gif
[Fri Jun 14 11:08:53 2013] Mean detx,y = (-12741.33, -3877.95) 
[Fri Jun 14 11:08:57 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 11:09:12 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 11:09:12 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Fri Jun 14 11:09:12 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src93_bgd.pi.gz
[Sat Jun 15 10:12:56 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 10:12:56 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:49:40 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:40 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src93_src_b10.pi.gz = 1709.00
[Sun Jun 16 10:49:40 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src93_bgd.pi.gz = 1438.00
[Sun Jun 16 10:49:40 2013] Got source and background scale factors 1108220.000000, 1525428.000000
[Sun Jun 16 10:49:40 2013] User source parameters:
  Position = (430.0, 230.9) = 18 18 50.14 -15 1 38.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 664.3 +/- 42.3
  Background aperture counts = 1044.7
  Rate = 0.01 +/- 0.0007

[Sun Jun 16 10:49:40 2013] Updating counts from extracted products
[Sun Jun 16 10:49:40 2013] Set source signif. to 664.30/32.32 = 20.55
[Sun Jun 16 10:49:55 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:55 2013] Using photon index=1.80, rate=0.0111, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src93.arf
[Sun Jun 16 10:49:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:55 2013] Updating source flux to 3.8e-13
[Sun Jun 16 10:52:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src93_pl.csv not found, spectral fit skipped or did not complete