[Fri Jun 14 10:15:39 2013] Detection parameters:
  Position = (411.0, 236.0) = 18 18 55.85 -15 1 14.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 486.5 +/- 36.5
  Background counts = 263.4
  Rate = 0.006 +/- 0.0005

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 9.33'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 11.09 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 11.09"
[Fri Jun 14 10:16:28 2013] source mask rpix=2.6, npix_max = 37, mask sum = 34, frac = 0.914
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 89 for pass 0, mean size = 11.09"
[Fri Jun 14 10:16:32 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src89.ximg exists
[Fri Jun 14 10:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src89.csv
[Fri Jun 14 10:16:32 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src89_1.ximg exists
[Fri Jun 14 10:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src89.csv
[Fri Jun 14 10:16:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:34 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Fri Jun 14 10:16:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src89.csv
[Fri Jun 14 10:16:34 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Fri Jun 14 10:16:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src89.csv
[Fri Jun 14 10:16:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src89_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:04 2013] Source 91 is offset by 3.236467 and -2.442336 pixels which is larger than
2 X fitted extent = 1.219798 x 1.219798, not incorporating fit results
[Fri Jun 14 10:17:05 2013] Warning, spatial fit 89 centroid is now closest to src. 89
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:05 2013] Source is confused with source 89
[Fri Jun 14 10:17:54 2013] Using EEF radius (= 11.09 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 11.09"
[Fri Jun 14 10:17:54 2013] source mask rpix=2.6, npix_max = 37, mask sum = 34, frac = 0.914
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 84 for pass 1, mean size = 11.09"
[Fri Jun 14 10:17:56 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src84.ximg exists
[Fri Jun 14 10:17:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src84.csv
[Fri Jun 14 10:17:56 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src84_1.ximg exists
[Fri Jun 14 10:17:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src84.csv
[Fri Jun 14 10:17:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src84_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:59 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src84.ximg exists
[Fri Jun 14 10:17:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src84.csv
[Fri Jun 14 10:17:59 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src84_1.ximg exists
[Fri Jun 14 10:17:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src84.csv
[Fri Jun 14 10:17:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src84_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:29 2013] Warning, spatial fit 84 centroid is now closest to src. 89
[Fri Jun 14 10:18:29 2013] Source 91 is offset by 8.701984 and 2.791112 pixels which is larger than
2 X fitted extent = 1.333862 x 1.333862, not incorporating fit results
[Fri Jun 14 10:18:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:30 2013] Assessing source extent using major
[Fri Jun 14 10:18:30 2013] Source does appear to be extended
[Fri Jun 14 10:18:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:22 2013] XMMSAS src. selection expression = ellipse(35706.070648, 20482.712784, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 10:19:22 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src91_src.reg
[Fri Jun 14 10:19:22 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (373, 198) - (448, 273)
[Fri Jun 14 10:19:22 2013] XMMSAS bgd. selection expression = annulus(35706.070648, 20482.712784, 1087.500000, 2175.000000, X, Y) && !ellipse(33879.018800, 20818.320000, 1642.912047, 1642.912047, 0.000000, X, Y) && !ellipse(38073.254944, 19796.050522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33984.706299, 19536.095276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38560.092000, 19626.746200, 2009.712058, 2009.712058, 0.000000, X, Y) && !ellipse(34081.086000, 18932.740000, 1779.504051, 1779.504051, 0.000000, X, Y) && !ellipse(34486.263473, 17859.378310, 874.464025, 874.464025, 357.246440, X, Y) && !ellipse(33264.059560, 19561.942200, 437.898413, 437.898413, 0.000000, X, Y) && !ellipse(37856.962982, 17960.152191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35576.226440, 17701.540390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37162.955800, 23493.046400, 962.344028, 962.344028, 0.000000, X, Y) && !ellipse(35329.406952, 23300.024109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38103.583344, 22252.739838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35049.808472, 21880.269760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34617.967957, 22043.726639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32937.368927, 21618.741409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36146.298401, 20391.496597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37359.620239, 20037.775009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35602.431580, 19261.913055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36804.360687, 19174.005035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39446.804000, 18480.571400, 2097.000060, 2097.000060, 0.000000, X, Y) && !ellipse(38050.756226, 18752.277527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35531.526367, 18202.272278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37840.196472, 17463.515686, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 10:19:22 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src91.gif
[Fri Jun 14 11:07:31 2013] Mean detx,y = (-11174.54, -3497.21) 
[Fri Jun 14 11:07:34 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 11:07:48 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 11:07:48 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Fri Jun 14 11:07:48 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Sat Jun 15 10:10:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 10:10:01 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:49:39 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:39 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src91_src_b10.pi.gz = 1835.00
[Sun Jun 16 10:49:39 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src91_bgd.pi.gz = 1480.00
[Sun Jun 16 10:49:39 2013] Got source and background scale factors 1069720.000000, 1858155.000000
[Sun Jun 16 10:49:39 2013] User source parameters:
  Position = (411.0, 236.0) = 18 18 55.85 -15 1 14.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 983.0 +/- 43.8
  Background aperture counts = 852.0
  Rate = 0.02 +/- 0.0007

[Sun Jun 16 10:49:39 2013] Updating counts from extracted products
[Sun Jun 16 10:49:39 2013] Set source signif. to 982.98/29.19 = 33.68
[Sun Jun 16 10:49:55 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:55 2013] Using photon index=1.80, rate=0.0165, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src91.arf
[Sun Jun 16 10:49:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:55 2013] Updating source flux to 2.4e-13
[Sun Jun 16 10:52:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src91_pl.csv not found, spectral fit skipped or did not complete