[Fri Jun 14 10:15:38 2013] Detection parameters:
  Position = (379.1, 249.0) = 18 19 5.41 -15 0 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 246.7 +/- 28.7
  Background counts = 254.7
  Rate = 0.003 +/- 0.0004

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 6.86'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 9.86"
[Fri Jun 14 10:16:28 2013] source mask rpix=2.3, npix_max = 30, mask sum = 29, frac = 0.947
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 83 for pass 0, mean size = 9.86"
[Fri Jun 14 10:16:31 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src83.ximg exists
[Fri Jun 14 10:16:31 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src83_1.ximg exists
[Fri Jun 14 10:16:31 2013] Fit fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src83 appears to have run properly
[Fri Jun 14 10:16:34 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Fri Jun 14 10:16:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src83.csv
[Fri Jun 14 10:16:34 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Fri Jun 14 10:16:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src83.csv
[Fri Jun 14 10:16:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:05 2013] Warning: source 83 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 85 at 13.774130 pixels away
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:54 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 9.86"
[Fri Jun 14 10:17:54 2013] source mask rpix=2.3, npix_max = 30, mask sum = 29, frac = 0.947
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 78 for pass 1, mean size = 9.86"
[Fri Jun 14 10:17:56 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src78.ximg exists
[Fri Jun 14 10:17:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src78.csv
[Fri Jun 14 10:17:56 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src78_1.ximg exists
[Fri Jun 14 10:17:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src78.csv
[Fri Jun 14 10:17:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:59 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Fri Jun 14 10:17:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src78.csv
[Fri Jun 14 10:17:59 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Fri Jun 14 10:17:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src78.csv
[Fri Jun 14 10:17:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:29 2013] Warning, spatial fit 78 centroid is now closest to src. 1
[Fri Jun 14 10:18:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:30 2013] Assessing source extent using major
[Fri Jun 14 10:18:30 2013] Source does appear to be extended
[Fri Jun 14 10:18:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:22 2013] XMMSAS src. selection expression = ellipse(32937.368927, 21618.741409, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 10:19:22 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src85_src.reg
[Fri Jun 14 10:19:22 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (342, 212) - (417, 287)
[Fri Jun 14 10:19:22 2013] XMMSAS bgd. selection expression = annulus(32937.368927, 21618.741409, 1087.500000, 2175.000000, X, Y) && !ellipse(33879.018800, 20818.320000, 1642.912047, 1642.912047, 0.000000, X, Y) && !ellipse(33984.706299, 19536.095276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34081.086000, 18932.740000, 1779.504051, 1779.504051, 0.000000, X, Y) && !ellipse(33264.059560, 19561.942200, 437.898413, 437.898413, 0.000000, X, Y) && !ellipse(35329.406952, 23300.024109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30555.364258, 22777.057678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31655.234600, 21558.342000, 1694.296049, 1694.296049, 0.000000, X, Y) && !ellipse(35049.808472, 21880.269760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34617.967957, 22043.726639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35706.070648, 20482.712784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35602.431580, 19261.913055, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 10:19:22 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src85.gif
[Fri Jun 14 11:02:21 2013] Mean detx,y = (-8444.34, -2525.75) 
[Fri Jun 14 11:02:26 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 11:02:48 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 11:02:49 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Fri Jun 14 11:02:49 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Sat Jun 15 10:08:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 10:08:28 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:49:36 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:36 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src85_src_b10.pi.gz = 1280.00
[Sun Jun 16 10:49:37 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src85_bgd.pi.gz = 1108.00
[Sun Jun 16 10:49:37 2013] Got source and background scale factors 1084808.000000, 1719836.000000
[Sun Jun 16 10:49:37 2013] User source parameters:
  Position = (379.1, 249.0) = 18 19 5.41 -15 0 16.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 581.1 +/- 36.8
  Background aperture counts = 698.9
  Rate = 0.01 +/- 0.0006

[Sun Jun 16 10:49:37 2013] Updating counts from extracted products
[Sun Jun 16 10:49:37 2013] Set source signif. to 581.12/26.44 = 21.98
[Sun Jun 16 10:49:54 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:54 2013] Using photon index=1.80, rate=0.00975, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src85.arf
[Sun Jun 16 10:49:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:54 2013] Updating source flux to 1.1e-13
[Sun Jun 16 10:52:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src85_pl.csv not found, spectral fit skipped or did not complete