[Fri Jun 14 10:15:38 2013] Detection parameters:
  Position = (307.8, 294.2) = 18 19 26.83 -14 57 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.6 +/- 21.8
  Background counts = 245.4
  Rate = 0.003 +/- 0.0004

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 0.74'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 6.80"
[Fri Jun 14 10:16:28 2013] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.705
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 6.80"
[Fri Jun 14 10:16:31 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src67.ximg exists
[Fri Jun 14 10:16:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src67.csv
[Fri Jun 14 10:16:31 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src67_1.ximg exists
[Fri Jun 14 10:16:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src67.csv
[Fri Jun 14 10:16:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:34 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Fri Jun 14 10:16:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src67.csv
[Fri Jun 14 10:16:34 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Fri Jun 14 10:16:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src67.csv
[Fri Jun 14 10:16:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:05 2013] Warning, spatial fit 67 centroid is now closest to src. 71
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:05 2013] Source is confused with source 68
[Fri Jun 14 10:17:54 2013] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 6.80"
[Fri Jun 14 10:17:54 2013] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.705
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 63 for pass 1, mean size = 6.80"
[Fri Jun 14 10:17:56 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src63.ximg exists
[Fri Jun 14 10:17:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src63.csv
[Fri Jun 14 10:17:56 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src63_1.ximg exists
[Fri Jun 14 10:17:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src63.csv
[Fri Jun 14 10:17:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:58 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Fri Jun 14 10:17:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src63.csv
[Fri Jun 14 10:17:58 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Fri Jun 14 10:17:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src63.csv
[Fri Jun 14 10:17:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:29 2013] Warning, spatial fit 63 centroid is now closest to src. 68
[Fri Jun 14 10:18:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:30 2013] Assessing source extent using major
[Fri Jun 14 10:18:30 2013] Source does appear to be extended
[Fri Jun 14 10:18:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:22 2013] XMMSAS src. selection expression = ellipse(26728.981171, 25549.210938, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 10:19:22 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src69_src.reg
[Fri Jun 14 10:19:22 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (270, 257) - (345, 332)
[Fri Jun 14 10:19:22 2013] XMMSAS bgd. selection expression = annulus(26728.981171, 25549.210938, 1087.500000, 2175.000000, X, Y) && !ellipse(24602.151400, 24310.524200, 430.472877, 430.472877, 0.000000, X, Y) && !ellipse(23858.422000, 27859.620000, 1255.760036, 1255.760036, 0.000000, X, Y) && !ellipse(24249.956112, 27701.690471, 1150.264033, 253.804676, 54.615789, X, Y) && !ellipse(24750.322000, 27177.634000, 653.230419, 653.230419, 0.000000, X, Y) && !ellipse(25401.372000, 26505.276000, 1116.464032, 1116.464032, 0.000000, X, Y) && !ellipse(24640.092000, 27121.216000, 2231.456064, 2231.456064, 0.000000, X, Y) && !ellipse(25816.608000, 26224.071000, 435.801613, 435.801613, 0.000000, X, Y) && !ellipse(26238.204315, 25855.893372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27453.958160, 24814.853729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27966.713348, 24488.200165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29176.108398, 23701.947754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29695.623291, 23483.643280, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 10:19:22 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src69.gif
[Fri Jun 14 10:47:57 2013] Mean detx,y = (-1736.03, 1105.07) 
[Fri Jun 14 10:48:02 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 10:48:17 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 10:48:17 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Fri Jun 14 10:48:17 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Sat Jun 15 09:55:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 09:55:35 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:49:28 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:28 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src69_src_b10.pi.gz = 987.00
[Sun Jun 16 10:49:29 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src69_bgd.pi.gz = 3708.00
[Sun Jun 16 10:49:29 2013] Got source and background scale factors 1026692.000000, 4694296.000000
[Sun Jun 16 10:49:29 2013] User source parameters:
  Position = (307.8, 294.2) = 18 19 26.83 -14 57 3.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 176.0 +/- 32.4
  Background aperture counts = 811.0
  Rate = 0.003 +/- 0.0005

[Sun Jun 16 10:49:29 2013] Updating counts from extracted products
[Sun Jun 16 10:49:29 2013] Set source signif. to 176.02/28.48 = 6.18
[Sun Jun 16 10:49:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:53 2013] Using photon index=1.80, rate=0.00295, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src69.arf
[Sun Jun 16 10:49:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:54 2013] Updating source flux to 2.3e-14
[Sun Jun 16 10:52:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src69_pl.csv not found, spectral fit skipped or did not complete