[Fri Jun 14 10:15:34 2013] Detection parameters:
  Position = (438.2, 228.1) = 18 18 47.68 -15 1 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 738.2 +/- 44.0
  Background counts = 292.7
  Rate = 0.009 +/- 0.0006

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 11.34'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 12.10"
[Fri Jun 14 10:16:28 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.836
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 12.10"
[Fri Jun 14 10:16:29 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun 14 10:16:30 2013] Fit fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src6 appears to have run properly
[Fri Jun 14 10:16:32 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun 14 10:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Jun 14 10:16:32 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun 14 10:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Jun 14 10:16:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:04 2013] Warning, spatial fit 6 centroid is now closest to src. 97
[Fri Jun 14 10:17:05 2013] Source 6 is offset by -1.323644 and 1.877109 pixels which is larger than
2 X fitted extent = 1.375628 x 1.375628, not incorporating fit results
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:05 2013] Source is confused with source 8
[Fri Jun 14 10:17:54 2013] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 12.10"
[Fri Jun 14 10:17:54 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.836
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 12.10"
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src5.csv
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src5.csv
[Fri Jun 14 10:17:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:57 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun 14 10:17:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jun 14 10:17:57 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun 14 10:17:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jun 14 10:17:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:29 2013] Warning, spatial fit 5 centroid is now closest to src. 94
[Fri Jun 14 10:18:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:29 2013] Assessing source extent using major
[Fri Jun 14 10:18:29 2013] Source does appear to be extended
[Fri Jun 14 10:18:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:19 2013] XMMSAS src. selection expression = ellipse(38073.254944, 19796.050522, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 10:19:19 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src6_src.reg
[Fri Jun 14 10:19:19 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (401, 191) - (476, 266)
[Fri Jun 14 10:19:20 2013] XMMSAS bgd. selection expression = annulus(38073.254944, 19796.050522, 1087.500000, 2175.000000, X, Y) && !ellipse(38560.092000, 19626.746200, 2009.712058, 2009.712058, 0.000000, X, Y) && !ellipse(37052.799744, 17181.752029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36145.316040, 17092.108948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40844.316000, 19272.015000, 793.888823, 793.888823, 0.000000, X, Y) && !ellipse(37856.962982, 17960.152191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35576.226440, 17701.540390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38103.583344, 22252.739838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35049.808472, 21880.269760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38809.706970, 20756.012207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36146.298401, 20391.496597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35706.070648, 20482.712784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37359.620239, 20037.775009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39183.484650, 19547.429596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35602.431580, 19261.913055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36804.360687, 19174.005035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39446.804000, 18480.571400, 2097.000060, 2097.000060, 0.000000, X, Y) && !ellipse(38050.756226, 18752.277527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38700.232400, 18644.081600, 592.637617, 592.637617, 0.000000, X, Y) && !ellipse(35531.526367, 18202.272278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41425.306000, 18162.184880, 2182.520063, 364.921611, 0.000000, X, Y) && !ellipse(39206.323212, 17763.518066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39622.828278, 17637.015213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37840.196472, 17463.515686, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 10:19:20 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src6.gif
[Fri Jun 14 10:19:25 2013] ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Jun 14 10:19:25 2013] Mean detx,y = (-13579.12, -4104.17) 
[Fri Jun 14 10:19:25 2013] ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src6_src.img and ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Jun 14 10:19:25 2013] ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Jun 14 10:19:25 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun 14 10:19:25 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jun 14 10:19:25 2013] ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Jun 14 11:40:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 11:40:01 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:49:03 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:03 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 2417.00
[Sun Jun 16 10:49:03 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 735.00
[Sun Jun 16 10:49:04 2013] Got source and background scale factors 1210916.000000, 772897.000000
[Sun Jun 16 10:49:04 2013] User source parameters:
  Position = (438.2, 228.1) = 18 18 47.68 -15 1 49.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1265.5 +/- 50.2
  Background aperture counts = 1151.5
  Rate = 0.02 +/- 0.0008

[Sun Jun 16 10:49:04 2013] Updating counts from extracted products
[Sun Jun 16 10:49:04 2013] Set source signif. to 1265.46/33.93 = 37.29
[Sun Jun 16 10:49:49 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:49 2013] Using photon index=1.80, rate=0.0212, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src6.arf
[Sun Jun 16 10:49:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:49 2013] Updating source flux to 3.7e-13
[Sun Jun 16 10:52:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete