[Fri Jun 14 10:15:36 2013] Detection parameters:
  Position = (306.5, 329.7) = 18 19 27.21 -14 54 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 410.9 +/- 31.7
  Background counts = 225.9
  Rate = 0.007 +/- 0.0006

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 2.34'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 7.60"
[Fri Jun 14 10:16:28 2013] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.238
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 57 for pass 0, mean size = 7.60"
[Fri Jun 14 10:16:31 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src57.ximg exists
[Fri Jun 14 10:16:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src57.csv
[Fri Jun 14 10:16:31 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src57_1.ximg exists
[Fri Jun 14 10:16:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src57.csv
[Fri Jun 14 10:16:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Fri Jun 14 10:16:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src57.csv
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Fri Jun 14 10:16:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src57.csv
[Fri Jun 14 10:16:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:05 2013] Source 59 is offset by -6.473369 and -7.312084 pixels which is larger than
2 X fitted extent = 0.873356 x 0.873356, not incorporating fit results
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:54 2013] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 7.60"
[Fri Jun 14 10:17:54 2013] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.238
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 7.60"
[Fri Jun 14 10:17:56 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src53.ximg exists
[Fri Jun 14 10:17:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src53.csv
[Fri Jun 14 10:17:56 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src53_1.ximg exists
[Fri Jun 14 10:17:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src53.csv
[Fri Jun 14 10:17:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:58 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Fri Jun 14 10:17:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Fri Jun 14 10:17:58 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Fri Jun 14 10:17:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Fri Jun 14 10:17:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:29 2013] Source 59 is offset by -6.473369 and 6.661571 pixels which is larger than
2 X fitted extent = 0.873356 x 0.873356, not incorporating fit results
[Fri Jun 14 10:18:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:30 2013] Assessing source extent using major
[Fri Jun 14 10:18:30 2013] Source does appear to be extended
[Fri Jun 14 10:18:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:21 2013] XMMSAS src. selection expression = ellipse(26618.170868, 28633.202698, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src59_src.reg
[Fri Jun 14 10:19:21 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (269, 292) - (344, 367)
[Fri Jun 14 10:19:21 2013] XMMSAS bgd. selection expression = annulus(26618.170868, 28633.202698, 1087.500000, 2175.000000, X, Y) && !ellipse(29276.826935, 31443.914948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25323.829200, 30739.101800, 383.100011, 383.100011, 0.000000, X, Y) && !ellipse(29084.132874, 29721.095642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23858.422000, 27859.620000, 1255.760036, 1255.760036, 0.000000, X, Y) && !ellipse(24249.956112, 27701.690471, 1150.264033, 253.804676, 54.615789, X, Y) && !ellipse(24750.322000, 27177.634000, 653.230419, 653.230419, 0.000000, X, Y) && !ellipse(25401.372000, 26505.276000, 1116.464032, 1116.464032, 0.000000, X, Y) && !ellipse(24640.092000, 27121.216000, 2231.456064, 2231.456064, 0.000000, X, Y) && !ellipse(25816.608000, 26224.071000, 435.801613, 435.801613, 0.000000, X, Y) && !ellipse(26238.204315, 25855.893372, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src59.gif
[Fri Jun 14 10:30:16 2013] Mean detx,y = (-1565.46, 4199.03) 
[Fri Jun 14 10:30:20 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 10:30:46 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 10:30:46 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Fri Jun 14 10:30:46 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Fri Jun 14 12:28:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 12:28:54 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:49:24 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:24 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src59_src_b10.pi.gz = 1073.00
[Sun Jun 16 10:49:25 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src59_bgd.pi.gz = 3877.00
[Sun Jun 16 10:49:25 2013] Got source and background scale factors 1191304.000000, 6288978.000000
[Sun Jun 16 10:49:25 2013] User source parameters:
  Position = (306.5, 329.7) = 18 19 27.21 -14 54 27.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 338.6 +/- 33.8
  Background aperture counts = 734.4
  Rate = 0.006 +/- 0.0006

[Sun Jun 16 10:49:25 2013] Updating counts from extracted products
[Sun Jun 16 10:49:25 2013] Set source signif. to 338.59/27.10 = 12.49
[Sun Jun 16 10:49:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:53 2013] Using photon index=1.80, rate=0.00568, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src59.arf
[Sun Jun 16 10:49:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:53 2013] Updating source flux to 4.4e-14
[Sun Jun 16 10:52:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src59_pl.csv not found, spectral fit skipped or did not complete