[Fri Jun 14 10:15:36 2013] Detection parameters:
  Position = (227.2, 388.3) = 18 19 51.02 -14 50 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 357.3 +/- 30.6
  Background counts = 192.6
  Rate = 0.009 +/- 0.0008

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 8.32'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Fri Jun 14 10:16:28 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.046
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 10.59"
[Fri Jun 14 10:16:31 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src43.ximg exists
[Fri Jun 14 10:16:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src43.csv
[Fri Jun 14 10:16:31 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src43_1.ximg exists
[Fri Jun 14 10:16:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src43.csv
[Fri Jun 14 10:16:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Fri Jun 14 10:16:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Fri Jun 14 10:16:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Fri Jun 14 10:16:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:05 2013] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 14.378680 pixels away
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:05 2013] Source is confused with source 40
[Fri Jun 14 10:17:54 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Fri Jun 14 10:17:54 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.046
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 10.59"
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src40.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src40.csv
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src40_1.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src40.csv
[Fri Jun 14 10:17:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:58 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Fri Jun 14 10:17:58 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Fri Jun 14 10:17:58 2013] Fit fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Fri Jun 14 10:18:29 2013] Spatial fit model total counts = 1803.080000, observed total counts = 1646.000000
[Fri Jun 14 10:18:29 2013] Offset between fit and detection position for source 44 = 0.673824 pixels
[Fri Jun 14 10:18:29 2013] 1806.982000 total counts/ 1663.530000 bgd. counts: snr = 3.517153
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.673824 pixels
  Position = (227.2, 387.7) = 18 19 51.02 -14 50 15.2
  Extent = 4.2 (3.4-7.2)", rotation angle = 0
  Source counts = 143.5 +/- 42.5
  Background counts = 1663.5
  Rate = 0.002 +/- 0.0007
[Fri Jun 14 10:18:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:30 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:30 2013] Source does appear to be extended
[Fri Jun 14 10:18:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:21 2013] XMMSAS src. selection expression = ellipse(19714.184700, 33678.933000, 254.100607, 254.100607, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src44_src.reg
[Fri Jun 14 10:19:21 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (213, 373) - (242, 402)
[Fri Jun 14 10:19:21 2013] XMMSAS bgd. selection expression = annulus(19714.184700, 33678.933000, 423.501012, 847.002024, X, Y) && !ellipse(19570.634000, 34189.024000, 744.143221, 744.143221, 0.000000, X, Y) && !ellipse(18102.852051, 34231.387726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18900.876862, 33664.483215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18401.273800, 33502.669000, 858.104025, 858.104025, 0.000000, X, Y) && !ellipse(18141.916824, 32674.077637, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src44.gif
[Fri Jun 14 10:19:34 2013] ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src44_src.evt and ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src44_bgd.evt exist, delete to re-create
[Fri Jun 14 10:19:35 2013] Mean detx,y = (5528.61, 8944.32) 
[Fri Jun 14 10:19:35 2013] ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src44_src.img and ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src44_bgd.img exist, delete to re-create
[Fri Jun 14 10:19:35 2013] ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src44_src_b10.pi.gz and ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src44_bgd.pi exist, delete to re-create
[Fri Jun 14 10:19:35 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Fri Jun 14 10:19:35 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sun Jun 16 10:49:18 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:19 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src44_src_b10.pi.gz = 314.00
[Sun Jun 16 10:49:19 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src44_bgd.pi.gz = 226.00
[Sun Jun 16 10:49:19 2013] Got source and background scale factors 203200.000000, 372954.000000
[Sun Jun 16 10:49:19 2013] User source parameters:
  Position = (227.2, 387.7) = 18 19 51.02 -14 50 15.2
  Extent = 4.2 (3.4-7.2)", rotation angle = 0
  Source aperture counts = 190.9 +/- 18.7
  Background aperture counts = 123.1
  Rate = 0.003 +/- 0.0003

[Sun Jun 16 10:49:51 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:51 2013] Using photon index=1.80, rate=0.00241, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src44.arf
[Sun Jun 16 10:49:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:52 2013] Updating source flux to 3.7e-14
[Sun Jun 16 10:52:29 2013] Flag c found in src. 44 procflags, skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete