[Fri Jun 14 10:15:36 2013] Detection parameters:
  Position = (217.8, 387.5) = 18 19 53.83 -14 50 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.5 +/- 23.9
  Background counts = 193.9
  Rate = 0.004 +/- 0.0006

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 8.71'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 10.78 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 10.78"
[Fri Jun 14 10:16:28 2013] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.845
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 10.78"
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src42.ximg exists
[Fri Jun 14 10:16:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src42.csv
[Fri Jun 14 10:16:31 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src42_1.ximg exists
[Fri Jun 14 10:16:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src42.csv
[Fri Jun 14 10:16:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Fri Jun 14 10:16:33 2013] Fit fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Fri Jun 14 10:17:05 2013] Spatial fit model total counts = 1913.180000, observed total counts = 1593.000000
[Fri Jun 14 10:17:05 2013] Poor agreement between spatial fit and data for source 43
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 10:17:05 2013] Warning, spatial fit 42 centroid is now closest to src. 40
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:05 2013] Source is confused with source 46
[Fri Jun 14 10:17:54 2013] Using EEF radius (= 10.78 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 10.78"
[Fri Jun 14 10:17:54 2013] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.845
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 10.78"
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src39.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src39.csv
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src39_1.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src39.csv
[Fri Jun 14 10:17:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:58 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Fri Jun 14 10:17:58 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Fri Jun 14 10:17:58 2013] Fit fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Fri Jun 14 10:18:29 2013] Source 43 is offset by 1.389136 and 2.085761 pixels which is larger than
2 X fitted extent = 1.072529 x 1.072529, not incorporating fit results
[Fri Jun 14 10:18:29 2013] Warning, spatial fit 39 centroid is now closest to src. 40
[Fri Jun 14 10:18:29 2013] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 10.198253 pixels away
[Fri Jun 14 10:18:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:30 2013] Assessing source extent using major
[Fri Jun 14 10:18:30 2013] Source does appear to be extended
[Fri Jun 14 10:18:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:21 2013] XMMSAS src. selection expression = ellipse(18900.876862, 33664.483215, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src43_src.reg
[Fri Jun 14 10:19:21 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (180, 350) - (255, 425)
[Fri Jun 14 10:19:21 2013] XMMSAS bgd. selection expression = annulus(18900.876862, 33664.483215, 1087.500000, 2175.000000, X, Y) && !ellipse(18143.680000, 36866.098000, 1033.056030, 1033.056030, 0.000000, X, Y) && !ellipse(18416.663239, 36405.392090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17158.111649, 36561.356476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17275.268799, 36149.112732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18731.489975, 35613.728729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16208.840439, 35438.770264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17947.828873, 34638.186005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19570.634000, 34189.024000, 744.143221, 744.143221, 0.000000, X, Y) && !ellipse(18102.852051, 34231.387726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19714.184700, 33678.933000, 338.800810, 338.800810, 0.000000, X, Y) && !ellipse(18401.273800, 33502.669000, 858.104025, 858.104025, 0.000000, X, Y) && !ellipse(18141.916824, 32674.077637, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src43.gif
[Fri Jun 14 10:19:34 2013] ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src43_src.evt and ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src43_bgd.evt exist, delete to re-create
[Fri Jun 14 10:19:34 2013] Mean detx,y = (6333.16, 8862.70) 
[Fri Jun 14 10:19:34 2013] ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src43_src.img and ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src43_bgd.img exist, delete to re-create
[Fri Jun 14 10:19:34 2013] ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src43_src_b10.pi.gz and ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src43_bgd.pi exist, delete to re-create
[Fri Jun 14 10:19:34 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri Jun 14 10:19:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Fri Jun 14 10:19:34 2013] ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src43_src.lc and ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src43_bgd.lc exist, delete to re-create
[Fri Jun 14 12:16:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 12:16:10 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:49:18 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:18 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 1226.00
[Sun Jun 16 10:49:18 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src43_bgd.pi.gz = 3100.00
[Sun Jun 16 10:49:18 2013] Got source and background scale factors 1347200.000000, 4844259.000000
[Sun Jun 16 10:49:18 2013] User source parameters:
  Position = (217.8, 387.5) = 18 19 53.83 -14 50 14.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 363.9 +/- 36.0
  Background aperture counts = 862.1
  Rate = 0.006 +/- 0.0006

[Sun Jun 16 10:49:18 2013] Updating counts from extracted products
[Sun Jun 16 10:49:18 2013] Set source signif. to 363.88/29.36 = 12.39
[Sun Jun 16 10:49:51 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:51 2013] Using photon index=1.80, rate=0.0061, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src43.arf
[Sun Jun 16 10:49:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:51 2013] Updating source flux to 6.7e-14
[Sun Jun 16 10:52:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete