[Fri Jun 14 10:15:36 2013] Detection parameters:
  Position = (386.3, 392.6) = 18 19 3.30 -14 49 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.1 +/- 22.4
  Background counts = 168.4
  Rate = 0.002 +/- 0.0003

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 9.33'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 11.10"
[Fri Jun 14 10:16:28 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.967
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 11.10"
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src40.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src40.csv
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src40_1.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src40.csv
[Fri Jun 14 10:16:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Fri Jun 14 10:16:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Fri Jun 14 10:16:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Fri Jun 14 10:16:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:05 2013] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 14.317824 pixels away
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:54 2013] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 11.10"
[Fri Jun 14 10:17:54 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.967
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 11.10"
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src37.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src37.csv
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src37_1.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src37.csv
[Fri Jun 14 10:17:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:58 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Fri Jun 14 10:17:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Fri Jun 14 10:17:58 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Fri Jun 14 10:17:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Fri Jun 14 10:17:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:29 2013] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 12.375185 pixels away
[Fri Jun 14 10:18:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:30 2013] Assessing source extent using major
[Fri Jun 14 10:18:30 2013] Source does appear to be extended
[Fri Jun 14 10:18:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:21 2013] XMMSAS src. selection expression = ellipse(33555.284515, 34106.094238, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src41_src.reg
[Fri Jun 14 10:19:21 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (349, 355) - (424, 430)
[Fri Jun 14 10:19:21 2013] XMMSAS bgd. selection expression = annulus(33555.284515, 34106.094238, 1087.500000, 2175.000000, X, Y) && !ellipse(32380.670349, 35949.536835, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src41.gif
[Fri Jun 14 10:19:34 2013] ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src41_src.evt and ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src41_bgd.evt exist, delete to re-create
[Fri Jun 14 10:19:34 2013] Mean detx,y = (-8303.70, 10020.60) 
[Fri Jun 14 10:19:34 2013] ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src41_src.img and ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src41_bgd.img exist, delete to re-create
[Fri Jun 14 10:19:34 2013] ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src41_src_b10.pi.gz and ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src41_bgd.pi exist, delete to re-create
[Fri Jun 14 10:19:34 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Fri Jun 14 10:19:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Fri Jun 14 10:19:34 2013] ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src41_src.lc and ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src41_bgd.lc exist, delete to re-create
[Fri Jun 14 12:15:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 12:15:36 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:49:17 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:17 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src41_src_b10.pi.gz = 668.00
[Sun Jun 16 10:49:17 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src41_bgd.pi.gz = 4282.00
[Sun Jun 16 10:49:18 2013] Got source and background scale factors 1200034.000000, 9580605.000000
[Sun Jun 16 10:49:18 2013] User source parameters:
  Position = (386.3, 392.6) = 18 19 3.30 -14 49 53.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 131.7 +/- 26.9
  Background aperture counts = 536.3
  Rate = 0.002 +/- 0.0005

[Sun Jun 16 10:49:18 2013] Updating counts from extracted products
[Sun Jun 16 10:49:18 2013] Set source signif. to 131.65/23.16 = 5.68
[Sun Jun 16 10:49:51 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:51 2013] Using photon index=1.80, rate=0.00221, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src41.arf
[Sun Jun 16 10:49:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:51 2013] Updating source flux to 5.2e-14
[Sun Jun 16 10:52:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src41_pl.csv not found, spectral fit skipped or did not complete