[Fri Jun 14 10:15:36 2013] Detection parameters:
  Position = (206.9, 398.7) = 18 19 57.11 -14 49 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.1 +/- 21.2
  Background counts = 194.4
  Rate = 0.002 +/- 0.0003

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 9.84'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 11.35"
[Fri Jun 14 10:16:28 2013] source mask rpix=2.6, npix_max = 38, mask sum = 30, frac = 0.776
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 11.35"
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src38.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src38.csv
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src38_1.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src38.csv
[Fri Jun 14 10:16:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Fri Jun 14 10:16:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Fri Jun 14 10:16:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Fri Jun 14 10:16:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:05 2013] Warning, spatial fit 38 centroid is now closest to src. 43
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:05 2013] Source is confused with source 42
[Fri Jun 14 10:17:54 2013] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 11.35"
[Fri Jun 14 10:17:54 2013] source mask rpix=2.6, npix_max = 38, mask sum = 30, frac = 0.776
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 11.35"
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src35.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src35.csv
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src35_1.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src35.csv
[Fri Jun 14 10:17:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:58 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Fri Jun 14 10:17:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Fri Jun 14 10:17:58 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Fri Jun 14 10:17:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Fri Jun 14 10:17:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:29 2013] Source 39 is offset by 9.311504 and 1.240391 pixels which is larger than
2 X fitted extent = 1.380359 x 1.380359, not incorporating fit results
[Fri Jun 14 10:18:29 2013] Warning, spatial fit 35 centroid is now closest to src. 37
[Fri Jun 14 10:18:29 2013] Spatial fit model total counts = 1811.440000, observed total counts = 1435.000000
[Fri Jun 14 10:18:29 2013] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 10:18:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:30 2013] Assessing source extent using major
[Fri Jun 14 10:18:30 2013] Source does appear to be extended
[Fri Jun 14 10:18:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:21 2013] XMMSAS src. selection expression = ellipse(17947.828873, 34638.186005, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src39_src.reg
[Fri Jun 14 10:19:21 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (169, 361) - (244, 436)
[Fri Jun 14 10:19:21 2013] XMMSAS bgd. selection expression = annulus(17947.828873, 34638.186005, 1087.500000, 2175.000000, X, Y) && !ellipse(15735.242000, 36910.236000, 615.900818, 615.900818, 0.000000, X, Y) && !ellipse(18143.680000, 36866.098000, 1033.056030, 1033.056030, 0.000000, X, Y) && !ellipse(18416.663239, 36405.392090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17158.111649, 36561.356476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15742.921295, 36508.194824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17275.268799, 36149.112732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18731.489975, 35613.728729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16208.840439, 35438.770264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19570.634000, 34189.024000, 744.143221, 744.143221, 0.000000, X, Y) && !ellipse(18102.852051, 34231.387726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18900.876862, 33664.483215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19714.184700, 33678.933000, 338.800810, 338.800810, 0.000000, X, Y) && !ellipse(18401.273800, 33502.669000, 858.104025, 858.104025, 0.000000, X, Y) && !ellipse(18141.916824, 32674.077637, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src39.gif
[Fri Jun 14 10:19:32 2013] ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src39_src.evt and ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src39_bgd.evt exist, delete to re-create
[Fri Jun 14 10:19:32 2013] Mean detx,y = (7251.00, 9775.98) 
[Fri Jun 14 10:19:32 2013] ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src39_src.img and ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src39_bgd.img exist, delete to re-create
[Fri Jun 14 10:19:32 2013] ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src39_src_b10.pi.gz and ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src39_bgd.pi exist, delete to re-create
[Fri Jun 14 10:19:32 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Fri Jun 14 10:19:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Fri Jun 14 10:19:32 2013] ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src39_src.lc and ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src39_bgd.lc exist, delete to re-create
[Fri Jun 14 12:12:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 12:12:47 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:49:16 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:16 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 972.00
[Sun Jun 16 10:49:17 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src39_bgd.pi.gz = 1677.00
[Sun Jun 16 10:49:17 2013] Got source and background scale factors 954643.000000, 2262276.000000
[Sun Jun 16 10:49:17 2013] User source parameters:
  Position = (206.9, 398.7) = 18 19 57.11 -14 49 24.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 264.3 +/- 32.2
  Background aperture counts = 707.7
  Rate = 0.004 +/- 0.0005

[Sun Jun 16 10:49:17 2013] Updating counts from extracted products
[Sun Jun 16 10:49:17 2013] Set source signif. to 264.33/26.60 = 9.94
[Sun Jun 16 10:49:51 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:51 2013] Using photon index=1.80, rate=0.00443, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src39.arf
[Sun Jun 16 10:49:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:51 2013] Updating source flux to 6.6e-14
[Sun Jun 16 10:52:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete