[Fri Jun 14 10:15:35 2013] Detection parameters:
  Position = (215.9, 409.9) = 18 19 54.41 -14 48 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 406.5 +/- 32.7
  Background counts = 190.5
  Rate = 0.005 +/- 0.0004

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 10.06'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 11.46 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 11.46"
[Fri Jun 14 10:16:28 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.916
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 11.46"
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src36.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src36.csv
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src36_1.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src36.csv
[Fri Jun 14 10:16:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Fri Jun 14 10:16:33 2013] Fit fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Fri Jun 14 10:17:05 2013] Warning, spatial fit 36 centroid is now closest to src. 32
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:54 2013] Using EEF radius (= 11.46 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 11.46"
[Fri Jun 14 10:17:54 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.916
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 11.46"
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src33.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src33.csv
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src33_1.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src33.csv
[Fri Jun 14 10:17:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:58 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Fri Jun 14 10:17:58 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Fri Jun 14 10:17:58 2013] Fit fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Fri Jun 14 10:18:29 2013] Source 37 is offset by 2.493996 and -2.153942 pixels which is larger than
2 X fitted extent = 2.497527 x 1.456262, not incorporating fit results
[Fri Jun 14 10:18:29 2013] Warning, spatial fit 33 centroid is now closest to src. 32
[Fri Jun 14 10:18:29 2013] Source 37 is offset by -1.278000 and 8.014675 pixels which is larger than
2 X fitted extent = 1.428993 x 1.428993, not incorporating fit results
[Fri Jun 14 10:18:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:30 2013] Assessing source extent using major
[Fri Jun 14 10:18:30 2013] Source does appear to be extended
[Fri Jun 14 10:18:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:21 2013] XMMSAS src. selection expression = ellipse(18731.489975, 35613.728729, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src37_src.reg
[Fri Jun 14 10:19:21 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (178, 372) - (253, 447)
[Fri Jun 14 10:19:21 2013] XMMSAS bgd. selection expression = annulus(18731.489975, 35613.728729, 1087.500000, 2175.000000, X, Y) && !ellipse(17651.862137, 38372.205933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16696.278595, 37720.308624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18143.680000, 36866.098000, 1033.056030, 1033.056030, 0.000000, X, Y) && !ellipse(18416.663239, 36405.392090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17158.111649, 36561.356476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15742.921295, 36508.194824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17275.268799, 36149.112732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16208.840439, 35438.770264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17947.828873, 34638.186005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19570.634000, 34189.024000, 744.143221, 744.143221, 0.000000, X, Y) && !ellipse(18102.852051, 34231.387726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18900.876862, 33664.483215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19714.184700, 33678.933000, 338.800810, 338.800810, 0.000000, X, Y) && !ellipse(18401.273800, 33502.669000, 858.104025, 858.104025, 0.000000, X, Y) && !ellipse(18141.916824, 32674.077637, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src37.gif
[Fri Jun 14 10:19:32 2013] ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src37_src.evt and ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src37_bgd.evt exist, delete to re-create
[Fri Jun 14 10:19:32 2013] Mean detx,y = (6593.29, 10783.83) 
[Fri Jun 14 10:19:32 2013] ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src37_src.img and ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src37_bgd.img exist, delete to re-create
[Fri Jun 14 10:19:32 2013] ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src37_src_b10.pi.gz and ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src37_bgd.pi exist, delete to re-create
[Fri Jun 14 10:19:32 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Fri Jun 14 10:19:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Fri Jun 14 10:19:32 2013] ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src37_src.lc and ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src37_bgd.lc exist, delete to re-create
[Fri Jun 14 12:12:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 12:12:09 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:49:15 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:15 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 1513.00
[Sun Jun 16 10:49:16 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src37_bgd.pi.gz = 1776.00
[Sun Jun 16 10:49:16 2013] Got source and background scale factors 1304682.000000, 3025716.000000
[Sun Jun 16 10:49:16 2013] User source parameters:
  Position = (215.9, 409.9) = 18 19 54.41 -14 48 35.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 747.2 +/- 39.9
  Background aperture counts = 765.8
  Rate = 0.01 +/- 0.0007

[Sun Jun 16 10:49:16 2013] Updating counts from extracted products
[Sun Jun 16 10:49:16 2013] Set source signif. to 747.19/27.67 = 27.00
[Sun Jun 16 10:49:51 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:51 2013] Using photon index=1.80, rate=0.0125, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src37.arf
[Sun Jun 16 10:49:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:51 2013] Updating source flux to 1.6e-13
[Sun Jun 16 10:52:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete