[Fri Jun 14 10:15:35 2013] Detection parameters:
  Position = (181.5, 420.2) = 18 20 4.71 -14 47 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.4 +/- 23.4
  Background counts = 194.6
  Rate = 0.001 +/- 0.0003

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 12.24'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 12.55 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 12.55"
[Fri Jun 14 10:16:28 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.069
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 12.55"
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src33.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src33.csv
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src33.csv
[Fri Jun 14 10:16:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Jun 14 10:16:33 2013] Fit fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Fri Jun 14 10:17:05 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 14.187312 pixels away
[Fri Jun 14 10:17:05 2013] Warning, spatial fit 33 centroid is now closest to src. 29
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:05 2013] Source is confused with source 29
[Fri Jun 14 10:17:54 2013] Using EEF radius (= 12.55 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 12.55"
[Fri Jun 14 10:17:54 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.069
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 12.55"
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src30.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src30.csv
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src30.csv
[Fri Jun 14 10:17:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:58 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri Jun 14 10:17:58 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Jun 14 10:17:58 2013] Fit fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Fri Jun 14 10:18:29 2013] Warning, spatial fit 30 centroid is now closest to src. 29
[Fri Jun 14 10:18:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:30 2013] Assessing source extent using major
[Fri Jun 14 10:18:30 2013] Source does appear to be extended
[Fri Jun 14 10:18:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:21 2013] XMMSAS src. selection expression = ellipse(15742.921295, 36508.194824, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src34_src.reg
[Fri Jun 14 10:19:21 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (144, 383) - (219, 458)
[Fri Jun 14 10:19:21 2013] XMMSAS bgd. selection expression = annulus(15742.921295, 36508.194824, 1087.500000, 2175.000000, X, Y) && !ellipse(17651.862137, 38372.205933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16696.278595, 37720.308624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15735.242000, 36910.236000, 615.900818, 615.900818, 0.000000, X, Y) && !ellipse(18143.680000, 36866.098000, 1033.056030, 1033.056030, 0.000000, X, Y) && !ellipse(18416.663239, 36405.392090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17158.111649, 36561.356476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17275.268799, 36149.112732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18731.489975, 35613.728729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16208.840439, 35438.770264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17947.828873, 34638.186005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18102.852051, 34231.387726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18401.273800, 33502.669000, 858.104025, 858.104025, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src34.gif
[Fri Jun 14 10:19:31 2013] ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src34_src.evt and ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src34_bgd.evt exist, delete to re-create
[Fri Jun 14 10:19:31 2013] Mean detx,y = (9620.81, 11546.34) 
[Fri Jun 14 10:19:31 2013] ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src34_src.img and ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src34_bgd.img exist, delete to re-create
[Fri Jun 14 10:19:31 2013] ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src34_src_b10.pi.gz and ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src34_bgd.pi exist, delete to re-create
[Fri Jun 14 10:19:31 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Fri Jun 14 10:19:31 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Fri Jun 14 10:19:31 2013] ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src34_src.lc and ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src34_bgd.lc exist, delete to re-create
[Fri Jun 14 12:11:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 12:11:12 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:49:14 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:14 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 1084.00
[Sun Jun 16 10:49:14 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src34_bgd.pi.gz = 1469.00
[Sun Jun 16 10:49:14 2013] Got source and background scale factors 1327786.000000, 1509279.000000
[Sun Jun 16 10:49:14 2013] User source parameters:
  Position = (181.5, 420.2) = 18 20 4.71 -14 47 49.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -208.4 +/- 33.9
  Background aperture counts = 1292.4
  Rate = -0.003 +/- 0.0006

[Sun Jun 16 10:49:14 2013] Updating counts from extracted products
[Sun Jun 16 10:49:14 2013] Set source signif. to -208.35/35.95 = -5.80
[Sun Jun 16 10:49:51 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:51 2013] Using photon index=1.80, rate=-0.0035, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src34.arf
[Sun Jun 16 10:49:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:51 2013] Updated flux is not positive, keeping original flux
[Sun Jun 16 10:52:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete