[Fri Jun 14 10:15:35 2013] Detection parameters:
  Position = (209.9, 423.0) = 18 19 56.19 -14 47 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 380.4 +/- 32.6
  Background counts = 191.5
  Rate = 0.005 +/- 0.0004

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 11.08'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 11.97"
[Fri Jun 14 10:16:28 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.851
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 11.97"
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src30.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src30.csv
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src30_1.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src30.csv
[Fri Jun 14 10:16:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Fri Jun 14 10:16:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Jun 14 10:16:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Fri Jun 14 10:16:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:05 2013] Source 31 is offset by 0.948187 and -7.326406 pixels which is larger than
2 X fitted extent = 5.107494 x 5.107494, not incorporating fit results
[Fri Jun 14 10:17:05 2013] Spatial fit model total counts = 2042.420000, observed total counts = 1852.000000
[Fri Jun 14 10:17:05 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:05 2013] Source is confused with source 32
[Fri Jun 14 10:17:54 2013] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 11.97"
[Fri Jun 14 10:17:54 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.851
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 11.97"
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src27.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src27.csv
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src27.csv
[Fri Jun 14 10:17:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:57 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Jun 14 10:17:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri Jun 14 10:17:57 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Jun 14 10:17:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri Jun 14 10:17:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:29 2013] Spatial fit model total counts = 1527.330000, observed total counts = 1000.000000
[Fri Jun 14 10:18:29 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 10:18:29 2013] Warning, spatial fit 27 centroid is now closest to src. 37
[Fri Jun 14 10:18:29 2013] Spatial fit model total counts = 2062.050000, observed total counts = 1990.000000
[Fri Jun 14 10:18:29 2013] Offset between fit and detection position for source 31 = 1.516015 pixels
[Fri Jun 14 10:18:29 2013] Warning, changing simple spatial fit ID from 27 to 28
[Fri Jun 14 10:18:29 2013] 1729.117000 total counts/ 1019.790000 bgd. counts: snr = 22.212177
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.516015 pixels
  Position = (209.1, 424.3) = 18 19 56.43 -14 47 35.8
  Extent = 12.9 (11.5-15.2)", rotation angle = 0
  Source counts = 709.3 +/- 41.6
  Background counts = 1019.8
  Rate = 0.01 +/- 0.0007
[Fri Jun 14 10:18:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:29 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:29 2013] Source does appear to be extended
[Fri Jun 14 10:18:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:21 2013] XMMSAS src. selection expression = ellipse(18143.680000, 36866.098000, 774.792022, 774.792022, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src31_src.reg
[Fri Jun 14 10:19:21 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (165, 380) - (254, 469)
[Fri Jun 14 10:19:21 2013] XMMSAS bgd. selection expression = annulus(18143.680000, 36866.098000, 1291.320037, 2582.640074, X, Y) && !ellipse(17651.862137, 38372.205933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16696.278595, 37720.308624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15735.242000, 36910.236000, 615.900818, 615.900818, 0.000000, X, Y) && !ellipse(18416.663239, 36405.392090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17158.111649, 36561.356476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15742.921295, 36508.194824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17275.268799, 36149.112732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18731.489975, 35613.728729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16208.840439, 35438.770264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17947.828873, 34638.186005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19570.634000, 34189.024000, 744.143221, 744.143221, 0.000000, X, Y) && !ellipse(18102.852051, 34231.387726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18900.876862, 33664.483215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18401.273800, 33502.669000, 858.104025, 858.104025, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src31.gif
[Fri Jun 14 10:19:30 2013] ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Fri Jun 14 10:19:30 2013] Mean detx,y = (7181.64, 12019.50) 
[Fri Jun 14 10:19:30 2013] ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src31_src.img and ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Fri Jun 14 10:19:30 2013] ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src31_src_b10.pi.gz and ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Fri Jun 14 10:19:30 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Jun 14 10:19:30 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Fri Jun 14 10:19:30 2013] ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Sun Jun 16 10:49:13 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:13 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 1662.00
[Sun Jun 16 10:49:13 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 2728.00
[Sun Jun 16 10:49:13 2013] Got source and background scale factors 1572818.000000, 4637244.000000
[Sun Jun 16 10:49:13 2013] User source parameters:
  Position = (209.1, 424.3) = 18 19 56.43 -14 47 35.8
  Extent = 12.9 (11.5-15.2)", rotation angle = 0
  Source aperture counts = 736.7 +/- 41.8
  Background aperture counts = 925.3
  Rate = 0.01 +/- 0.0007

[Sun Jun 16 10:49:51 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:51 2013] Using photon index=1.80, rate=0.0119, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src31.arf
[Sun Jun 16 10:49:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:51 2013] Updating source flux to 1.8e-13
[Sun Jun 16 10:52:29 2013] Flag b found in src. 31 procflags, skipping spectral fitting
[Sun Jun 16 10:52:29 2013] Flag p found in src. 31 procflags, skipping spectral fitting
[Sun Jun 16 10:52:29 2013] Flag c found in src. 31 procflags, skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete