[Fri Jun 14 10:15:35 2013] Detection parameters:
  Position = (181.1, 425.2) = 18 20 4.83 -14 47 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.8 +/- 21.6
  Background counts = 186.8
  Rate = 0.002 +/- 0.0003

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 12.53'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 12.69 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 12.69"
[Fri Jun 14 10:16:28 2013] source mask rpix=2.9, npix_max = 46, mask sum = 45, frac = 0.963
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 12.69"
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src28.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src28.csv
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src28.csv
[Fri Jun 14 10:16:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Jun 14 10:16:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Jun 14 10:16:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Jun 14 10:16:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:05 2013] Warning, spatial fit 28 centroid is now closest to src. 34
[Fri Jun 14 10:17:05 2013] Spatial fit model total counts = 1850.980000, observed total counts = 1700.000000
[Fri Jun 14 10:17:05 2013] Offset between fit and detection position for source 29 = 1.891491 pixels
[Fri Jun 14 10:17:05 2013] Warning, changing simple spatial fit ID from 28 to 33
[Fri Jun 14 10:17:05 2013] 1720.527000 total counts/ 1516.380000 bgd. counts: snr = 5.242507
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.891491 pixels
  Position = (181.4, 423.4) = 18 20 4.74 -14 47 39.7
  Extent = 12.7 (4.0-25.1)", rotation angle = 0
  Source counts = 204.1 +/- 41.5
  Background counts = 1516.4
  Rate = 0.003 +/- 0.0007
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:05 2013] Source is confused with source 34
[Fri Jun 14 10:17:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 12.66"
[Fri Jun 14 10:17:54 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.054
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 12.66"
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src25.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src25.csv
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src25.csv
[Fri Jun 14 10:17:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:57 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri Jun 14 10:17:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri Jun 14 10:17:57 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Jun 14 10:17:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri Jun 14 10:17:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:29 2013] Warning, spatial fit 25 centroid is now closest to src. 38
[Fri Jun 14 10:18:29 2013] Spatial fit model total counts = 1863.350000, observed total counts = 1700.000000
[Fri Jun 14 10:18:29 2013] Offset between fit and detection position for source 29 = 1.433727 pixels
[Fri Jun 14 10:18:29 2013] Warning, changing simple spatial fit ID from 25 to 30
[Fri Jun 14 10:18:29 2013] 1673.535500 total counts/ 1581.960000 bgd. counts: snr = 2.302404
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.433727 pixels
  Position = (181.4, 424.8) = 18 20 4.74 -14 47 33.5
  Extent = 7.7 (3.1-18.5)", rotation angle = 0
  Source counts = 91.6 +/- 40.9
  Background counts = 1582.0
  Rate = 0.002 +/- 0.0007
[Fri Jun 14 10:18:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:29 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:29 2013] Source does appear to be extended
[Fri Jun 14 10:18:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:21 2013] XMMSAS src. selection expression = ellipse(15735.242000, 36910.236000, 461.925613, 461.925613, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src29_src.reg
[Fri Jun 14 10:19:21 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (155, 398) - (208, 451)
[Fri Jun 14 10:19:21 2013] XMMSAS bgd. selection expression = annulus(15735.242000, 36910.236000, 769.876022, 1539.752044, X, Y) && !ellipse(17651.862137, 38372.205933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16696.278595, 37720.308624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18143.680000, 36866.098000, 1033.056030, 1033.056030, 0.000000, X, Y) && !ellipse(17158.111649, 36561.356476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15742.921295, 36508.194824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17275.268799, 36149.112732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16208.840439, 35438.770264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17947.828873, 34638.186005, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 10:19:21 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src29.gif
[Fri Jun 14 10:19:30 2013] ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Fri Jun 14 10:19:30 2013] Mean detx,y = (9615.00, 11903.94) 
[Fri Jun 14 10:19:30 2013] ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src29_src.img and ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Fri Jun 14 10:19:30 2013] ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Fri Jun 14 10:19:30 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jun 14 10:19:30 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Fri Jun 14 10:19:30 2013] ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Fri Jun 14 12:07:55 2013] Not generating rmf since there are only 91 counts
[Fri Jun 14 12:07:55 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:49:12 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:12 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 481.00
[Sun Jun 16 10:49:12 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 320.00
[Sun Jun 16 10:49:12 2013] Got source and background scale factors 578472.000000, 449842.000000
[Sun Jun 16 10:49:12 2013] User source parameters:
  Position = (181.4, 424.8) = 18 20 4.74 -14 47 33.5
  Extent = 7.7 (3.1-18.5)", rotation angle = 0
  Source aperture counts = 69.5 +/- 22.9
  Background aperture counts = 411.5
  Rate = 0.001 +/- 0.0004

[Sun Jun 16 10:49:50 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:50 2013] Using photon index=1.80, rate=0.00154, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src29.arf
[Sun Jun 16 10:49:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:50 2013] Updating source flux to 2.9e-14
[Sun Jun 16 10:52:29 2013] Flag c found in src. 29 procflags, skipping spectral fitting
[Sun Jun 16 10:52:29 2013] Source 29 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete