[Fri Jun 14 10:15:35 2013] Detection parameters:
  Position = (435.7, 207.0) = 18 18 48.42 -15 3 21.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 501.4 +/- 39.4
  Background counts = 282.6
  Rate = 0.006 +/- 0.0005

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 11.96'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 12.41"
[Fri Jun 14 10:16:28 2013] source mask rpix=2.9, npix_max = 44, mask sum = 36, frac = 0.801
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 12.41"
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src21.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src21.csv
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src21.csv
[Fri Jun 14 10:16:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Jun 14 10:16:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Jun 14 10:16:33 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Jun 14 10:16:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Jun 14 10:16:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:04 2013] Source 21 is offset by -1.139092 and -2.838067 pixels which is larger than
2 X fitted extent = 1.416759 x 1.416759, not incorporating fit results
[Fri Jun 14 10:17:04 2013] Warning, spatial fit 21 centroid is now closest to src. 100
[Fri Jun 14 10:17:05 2013] Spatial fit model total counts = 6026.900000, observed total counts = 5336.000000
[Fri Jun 14 10:17:05 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:05 2013] Source is confused with source 112
[Fri Jun 14 10:17:54 2013] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 12.41"
[Fri Jun 14 10:17:54 2013] source mask rpix=2.9, npix_max = 44, mask sum = 36, frac = 0.801
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 12.41"
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src18.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src18.csv
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src18.csv
[Fri Jun 14 10:17:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:57 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri Jun 14 10:17:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri Jun 14 10:17:57 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Jun 14 10:17:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri Jun 14 10:17:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:29 2013] Source 21 is offset by 9.107666 and -1.591308 pixels which is larger than
2 X fitted extent = 1.385913 x 1.385913, not incorporating fit results
[Fri Jun 14 10:18:29 2013] Spatial fit model total counts = 4145.740000, observed total counts = 3531.000000
[Fri Jun 14 10:18:29 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 10:18:29 2013] Source 21 is offset by -7.921897 and -1.121538 pixels which is larger than
2 X fitted extent = 3.778396 x 3.778396, not incorporating fit results
[Fri Jun 14 10:18:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:29 2013] Assessing source extent using major
[Fri Jun 14 10:18:29 2013] Source does appear to be extended
[Fri Jun 14 10:18:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:20 2013] XMMSAS src. selection expression = ellipse(37856.962982, 17960.152191, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 10:19:20 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src21_src.reg
[Fri Jun 14 10:19:20 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (398, 169) - (473, 244)
[Fri Jun 14 10:19:20 2013] XMMSAS bgd. selection expression = annulus(37856.962982, 17960.152191, 1087.500000, 2175.000000, X, Y) && !ellipse(38073.254944, 19796.050522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38560.092000, 19626.746200, 2009.712058, 2009.712058, 0.000000, X, Y) && !ellipse(34081.086000, 18932.740000, 1779.504051, 1779.504051, 0.000000, X, Y) && !ellipse(37052.799744, 17181.752029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36145.316040, 17092.108948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35576.226440, 17701.540390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38809.706970, 20756.012207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36146.298401, 20391.496597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35706.070648, 20482.712784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37359.620239, 20037.775009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39183.484650, 19547.429596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35602.431580, 19261.913055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36804.360687, 19174.005035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39446.804000, 18480.571400, 2097.000060, 2097.000060, 0.000000, X, Y) && !ellipse(38050.756226, 18752.277527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38700.232400, 18644.081600, 592.637617, 592.637617, 0.000000, X, Y) && !ellipse(35531.526367, 18202.272278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41425.306000, 18162.184880, 2182.520063, 364.921611, 0.000000, X, Y) && !ellipse(39206.323212, 17763.518066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39622.828278, 17637.015213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37840.196472, 17463.515686, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 10:19:20 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src21.gif
[Fri Jun 14 10:19:28 2013] ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Fri Jun 14 10:19:29 2013] Mean detx,y = (-13467.46, -5912.67) 
[Fri Jun 14 10:19:29 2013] ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src21_src.img and ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Fri Jun 14 10:19:29 2013] ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src21_src_b10.pi.gz and ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Fri Jun 14 10:19:29 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Jun 14 10:19:29 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri Jun 14 10:19:29 2013] ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Fri Jun 14 12:05:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 12:05:54 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:49:09 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:09 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 2219.00
[Sun Jun 16 10:49:09 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 1336.00
[Sun Jun 16 10:49:09 2013] Got source and background scale factors 1153552.000000, 1549420.000000
[Sun Jun 16 10:49:09 2013] User source parameters:
  Position = (435.7, 207.0) = 18 18 48.42 -15 3 21.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1224.3 +/- 48.1
  Background aperture counts = 994.7
  Rate = 0.02 +/- 0.0008

[Sun Jun 16 10:49:09 2013] Updating counts from extracted products
[Sun Jun 16 10:49:09 2013] Set source signif. to 1224.34/31.54 = 38.82
[Sun Jun 16 10:49:50 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:50 2013] Using photon index=1.80, rate=0.0205, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src21.arf
[Sun Jun 16 10:49:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:50 2013] Updating source flux to 3.8e-13
[Sun Jun 16 10:52:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete