[Fri Jun 14 10:15:35 2013] Detection parameters:
  Position = (300.9, 362.7) = 18 19 28.91 -14 52 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2533.5 +/- 64.6
  Background counts = 213.7
  Rate = 0.05 +/- 0.001

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 4.66'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 8.76"
[Fri Jun 14 10:16:28 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.989
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 8.76"
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src15.csv
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src15.csv
[Fri Jun 14 10:16:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:32 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jun 14 10:16:32 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jun 14 10:16:32 2013] Fit fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Jun 14 10:17:04 2013] Spatial fit model total counts = 3328.900000, observed total counts = 3326.000000
[Fri Jun 14 10:17:04 2013] Offset between fit and detection position for source 15 = 0.268009 pixels
[Fri Jun 14 10:17:04 2013] 3287.100000 total counts/ 1813.820000 bgd. counts: snr = 34.592998
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.268009 pixels
  Position = (300.7, 362.5) = 18 19 28.97 -14 52 4.7
  Extent = 5.5 (5.2-5.8)", rotation angle = 0
  Source counts = 1473.3 +/- 57.3
  Background counts = 1813.8
  Rate = 0.02 +/- 0.001
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 5.47"
[Fri Jun 14 10:17:54 2013] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.729
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 5.47"
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src13.csv
[Fri Jun 14 10:17:55 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jun 14 10:17:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src13.csv
[Fri Jun 14 10:17:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:57 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jun 14 10:17:57 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jun 14 10:17:57 2013] Fit fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Jun 14 10:18:29 2013] Spatial fit model total counts = 3324.560000, observed total counts = 3326.000000
[Fri Jun 14 10:18:29 2013] Offset between fit and detection position for source 15 = 0.000438 pixels
[Fri Jun 14 10:18:29 2013] 3282.210000 total counts/ 1810.910000 bgd. counts: snr = 34.574253
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.000438 pixels
  Position = (300.7, 362.5) = 18 19 28.97 -14 52 4.7
  Extent = 5.5 (5.2-5.8)", rotation angle = 0
  Source counts = 1471.3 +/- 57.3
  Background counts = 1810.9
  Rate = 0.02 +/- 0.001
[Fri Jun 14 10:18:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:29 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:29 2013] Source does appear to be extended
[Fri Jun 14 10:18:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:20 2013] Counts = 1471.300000, rescaling region sizes by 2.000000
[Fri Jun 14 10:19:20 2013] XMMSAS src. selection expression = ellipse(26110.367600, 31488.635600, 656.946019, 656.946019, 0.000000, X, Y)
[Fri Jun 14 10:19:20 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src15_src.reg
[Fri Jun 14 10:19:20 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (263, 325) - (338, 400)
[Fri Jun 14 10:19:20 2013] XMMSAS bgd. selection expression = annulus(26110.367600, 31488.635600, 2189.820063, 4379.640126, X, Y) && !ellipse(22480.076721, 33560.021088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26359.034698, 32285.537994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29276.826935, 31443.914948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25323.829200, 30739.101800, 383.100011, 383.100011, 0.000000, X, Y) && !ellipse(22227.470000, 29893.560000, 1348.320039, 1348.320039, 0.000000, X, Y) && !ellipse(29084.132874, 29721.095642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22653.678467, 29431.782410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23161.505920, 28922.067230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26618.170868, 28633.202698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23576.408000, 28399.200000, 339.450410, 339.450410, 0.000000, X, Y) && !ellipse(23858.422000, 27859.620000, 1255.760036, 1255.760036, 0.000000, X, Y) && !ellipse(24249.956112, 27701.690471, 1150.264033, 253.804676, 54.615789, X, Y) && !ellipse(23436.404620, 27739.685800, 359.553610, 359.553610, 0.000000, X, Y) && !ellipse(24750.322000, 27177.634000, 653.230419, 653.230419, 0.000000, X, Y) && !ellipse(25401.372000, 26505.276000, 1116.464032, 1116.464032, 0.000000, X, Y) && !ellipse(24640.092000, 27121.216000, 2231.456064, 2231.456064, 0.000000, X, Y)
[Fri Jun 14 10:19:20 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src15.gif
[Fri Jun 14 10:19:27 2013] ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0505240101/products/events/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Fri Jun 14 10:19:27 2013] Mean detx,y = (-973.33, 7027.19) 
[Fri Jun 14 10:19:27 2013] ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src15_src.img and ../../xmm0505240101/products/images/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Fri Jun 14 10:19:27 2013] ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src15_src_b10.pi.gz and ../../xmm0505240101/products/spectra/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Fri Jun 14 10:19:27 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jun 14 10:19:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri Jun 14 10:19:27 2013] ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0505240101/products/lightcurves/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sun Jun 16 10:49:07 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:07 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 2868.00
[Sun Jun 16 10:49:07 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 14510.00
[Sun Jun 16 10:49:07 2013] Got source and background scale factors 1364800.000000, 25225770.000000
[Sun Jun 16 10:49:07 2013] User source parameters:
  Position = (300.7, 362.5) = 18 19 28.97 -14 52 4.7
  Extent = 5.5 (5.2-5.8)", rotation angle = 0
  Source aperture counts = 2083.0 +/- 54.6
  Background aperture counts = 785.0
  Rate = 0.03 +/- 0.0009

[Sun Jun 16 10:49:50 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:50 2013] Using photon index=1.80, rate=0.0247, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src15.arf
[Sun Jun 16 10:49:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:50 2013] Updating source flux to 2.2e-13
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete