[Fri Jun 14 10:15:39 2013] Detection parameters:
  Position = (409.0, 209.8) = 18 18 56.45 -15 3 9.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 412.6 +/- 35.7
  Background counts = 285.5
  Rate = 0.005 +/- 0.0005

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 10.27'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 11.56 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 11.56"
[Fri Jun 14 10:16:28 2013] source mask rpix=2.7, npix_max = 39, mask sum = 30, frac = 0.752
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 100 for pass 0, mean size = 11.56"
[Fri Jun 14 10:16:32 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src100.ximg exists
[Fri Jun 14 10:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src100.csv
[Fri Jun 14 10:16:32 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src100_1.ximg exists
[Fri Jun 14 10:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src100.csv
[Fri Jun 14 10:16:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:34 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Fri Jun 14 10:16:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src100.csv
[Fri Jun 14 10:16:34 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Fri Jun 14 10:16:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src100.csv
[Fri Jun 14 10:16:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src100_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:05 2013] Warning, spatial fit 100 centroid is now closest to src. 22
[Fri Jun 14 10:17:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:05 2013] Assessing source extent using major
[Fri Jun 14 10:17:05 2013] Source does appear to be extended
[Fri Jun 14 10:17:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:05 2013] Source is confused with source 13
[Fri Jun 14 10:17:54 2013] Using EEF radius (= 11.56 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:54 2013] Initial guess for spatial extent in simple fitting = 11.56"
[Fri Jun 14 10:17:54 2013] source mask rpix=2.7, npix_max = 39, mask sum = 30, frac = 0.752
[Fri Jun 14 10:17:54 2013] Giving source the simple spatial ID 94 for pass 1, mean size = 11.56"
[Fri Jun 14 10:17:57 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src94.ximg exists
[Fri Jun 14 10:17:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src94.csv
[Fri Jun 14 10:17:57 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src94_1.ximg exists
[Fri Jun 14 10:17:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src94.csv
[Fri Jun 14 10:17:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src94_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:59 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src94.ximg exists
[Fri Jun 14 10:17:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src94.csv
[Fri Jun 14 10:17:59 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src94_1.ximg exists
[Fri Jun 14 10:17:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src94.csv
[Fri Jun 14 10:17:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src94_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:29 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 102 at 12.192459 pixels away
[Fri Jun 14 10:18:29 2013] Source 102 is offset by -5.200111 and -0.055077 pixels which is larger than
2 X fitted extent = 1.416759 x 1.416759, not incorporating fit results
[Fri Jun 14 10:18:29 2013] Spatial fit model total counts = 5637.570000, observed total counts = 4822.000000
[Fri Jun 14 10:18:29 2013] Poor agreement between spatial fit and data for source 102
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 10:18:29 2013] Warning, spatial fit 94 centroid is now closest to src. 14
[Fri Jun 14 10:18:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:30 2013] Assessing source extent using major
[Fri Jun 14 10:18:30 2013] Source does appear to be extended
[Fri Jun 14 10:18:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:19:23 2013] XMMSAS src. selection expression = ellipse(35531.526367, 18202.272278, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 10:19:23 2013] Not overwriting source region fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src102_src.reg
[Fri Jun 14 10:19:23 2013] Extracting stamp from image fullrun_pn_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (371, 172) - (446, 247)
[Fri Jun 14 10:19:23 2013] XMMSAS bgd. selection expression = annulus(35531.526367, 18202.272278, 1087.500000, 2175.000000, X, Y) && !ellipse(33879.018800, 20818.320000, 1642.912047, 1642.912047, 0.000000, X, Y) && !ellipse(38073.254944, 19796.050522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33984.706299, 19536.095276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38560.092000, 19626.746200, 2009.712058, 2009.712058, 0.000000, X, Y) && !ellipse(34081.086000, 18932.740000, 1779.504051, 1779.504051, 0.000000, X, Y) && !ellipse(37052.799744, 17181.752029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34486.263473, 17859.378310, 874.464025, 874.464025, 357.246440, X, Y) && !ellipse(36145.316040, 17092.108948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33264.059560, 19561.942200, 437.898413, 437.898413, 0.000000, X, Y) && !ellipse(37856.962982, 17960.152191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35576.226440, 17701.540390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36146.298401, 20391.496597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35706.070648, 20482.712784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37359.620239, 20037.775009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35602.431580, 19261.913055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36804.360687, 19174.005035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39446.804000, 18480.571400, 2097.000060, 2097.000060, 0.000000, X, Y) && !ellipse(38050.756226, 18752.277527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37840.196472, 17463.515686, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 10:19:23 2013] Writing fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src102.gif
[Fri Jun 14 11:19:58 2013] Mean detx,y = (-11045.49, -5831.60) 
[Fri Jun 14 11:20:01 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 11:20:17 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 11:20:17 2013] Setting source spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Fri Jun 14 11:20:17 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Sat Jun 15 10:20:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 10:20:47 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:49:42 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:42 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src102_src_b10.pi.gz = 2479.00
[Sun Jun 16 10:49:43 2013] Total counts from fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src102_bgd.pi.gz = 1471.00
[Sun Jun 16 10:49:43 2013] Got source and background scale factors 1018801.000000, 1337473.000000
[Sun Jun 16 10:49:43 2013] User source parameters:
  Position = (409.0, 209.8) = 18 18 56.45 -15 3 9.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1358.5 +/- 50.8
  Background aperture counts = 1120.5
  Rate = 0.02 +/- 0.0009

[Sun Jun 16 10:49:43 2013] Updating counts from extracted products
[Sun Jun 16 10:49:43 2013] Set source signif. to 1358.49/33.47 = 40.58
[Sun Jun 16 10:49:55 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:49:55 2013] Using photon index=1.80, rate=0.0228, arf fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src102.arf
[Sun Jun 16 10:49:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:49:56 2013] Updating source flux to 3.7e-13
[Sun Jun 16 10:52:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:53:08 2013] xmm0505240101/analysis//spectral/fullrun_pn_xmm0505240101_pi300-10000_pass1_cl_src102_pl.csv not found, spectral fit skipped or did not complete