[Fri Jun 14 10:15:34 2013] Detection parameters:
  Position = (486.2, 220.0) = 18 18 33.24 -15 2 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 519.1 +/- 41.5
  Background counts = 144.5
  Rate = 0.007 +/- 0.0005

[Fri Jun 14 10:15:40 2013] Off-axis axis estimate = 14.75'
[Fri Jun 14 10:16:28 2013] Using EEF radius (= 13.81 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:28 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 10:16:28 2013] Initial guess for spatial extent in simple fitting = 13.81"
[Fri Jun 14 10:16:28 2013] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.037
[Fri Jun 14 10:16:28 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 13.81"
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src10.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src10.csv
[Fri Jun 14 10:16:30 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Jun 14 10:16:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src10.csv
[Fri Jun 14 10:16:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:32 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Jun 14 10:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Jun 14 10:16:32 2013] fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Jun 14 10:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Jun 14 10:16:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:04 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 17.784164 pixels away
[Fri Jun 14 10:17:04 2013] Spatial fit model total counts = 2745.680000, observed total counts = 2748.000000
[Fri Jun 14 10:17:04 2013] Offset between fit and detection position for source 10 = 4.620005 pixels
[Fri Jun 14 10:17:04 2013] Warning, changing simple spatial fit ID from 10 to 19
[Fri Jun 14 10:17:04 2013] 2288.782200 total counts/ 2236.070000 bgd. counts: snr = 1.114727
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 4.620005 pixels
  Position = (490.3, 222.2) = 18 18 32.02 -15 2 14.7
  Extent = 11.0 (7.7-13.9)", rotation angle = 0
  Source counts = 52.7 +/- 47.8
  Background counts = 2236.1
  Rate = 0.0009 +/- 0.0008
  Deleting source due to low Poisson probability