[Fri Jun 14 10:15:46 2013] Detection parameters:
  Position = (171.1, 249.1) = 18 20 7.88 -15 0 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.8 +/- 16.8
  Background counts = 74.3
  Rate = 0.002 +/- 0.0004

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 9.90'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 11.38"
[Fri Jun 14 10:16:38 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.927
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 11.38"
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src55.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src55.csv
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src55_1.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src55.csv
[Fri Jun 14 10:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:41 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Fri Jun 14 10:16:41 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Fri Jun 14 10:16:41 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Fri Jun 14 10:17:29 2013] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 78 at 14.254708 pixels away
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:18:02 2013] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 11.38"
[Fri Jun 14 10:18:02 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.927
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 55 for pass 1, mean size = 11.38"
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src55.ximg exists
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src55_1.ximg exists
[Fri Jun 14 10:18:04 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src55 appears to have run properly
[Fri Jun 14 10:18:06 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Fri Jun 14 10:18:06 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Fri Jun 14 10:18:06 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Fri Jun 14 10:18:57 2013] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 78 at 14.664939 pixels away
[Fri Jun 14 10:18:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:58 2013] Assessing source extent using major
[Fri Jun 14 10:18:58 2013] Source does appear to be extended
[Fri Jun 14 10:18:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:18 2013] XMMSAS src. selection expression = ellipse(14835.421661, 21625.814407, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 12:54:19 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src78_src.reg
[Sat Jun 15 12:54:19 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (134, 212) - (209, 287)
[Sat Jun 15 12:54:19 2013] XMMSAS bgd. selection expression = annulus(14835.421661, 21625.814407, 1087.500000, 2175.000000, X, Y)
[Sat Jun 15 12:54:19 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src78.gif
[Sat Jun 15 13:50:14 2013] Mean detx,y = (-9596.12, 3291.65) 
[Sat Jun 15 13:50:16 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:50:23 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:50:23 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Sat Jun 15 13:50:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Sun Jun 16 10:24:37 2013] Not generating rmf since there are only 89 counts
[Sun Jun 16 10:24:37 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:43 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:43 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src78_src_b10.pi.gz = 503.00
[Sun Jun 16 10:50:43 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src78_bgd.pi.gz = 3371.00
[Sun Jun 16 10:50:43 2013] Got source and background scale factors 1338676.000000, 10893424.000000
[Sun Jun 16 10:50:43 2013] User source parameters:
  Position = (171.1, 249.1) = 18 20 7.88 -15 0 19.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 88.7 +/- 23.4
  Background aperture counts = 414.3
  Rate = 0.001 +/- 0.0003

[Sun Jun 16 10:50:43 2013] Updating counts from extracted products
[Sun Jun 16 10:50:43 2013] Set source signif. to 88.74/20.35 = 4.36
[Sun Jun 16 10:50:54 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:54 2013] Using photon index=1.80, rate=0.00118, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src78.arf
[Sun Jun 16 10:50:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:54 2013] Updating source flux to 3.7e-14
[Sun Jun 16 10:51:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src78_pl.csv not found, spectral fit skipped or did not complete