[Fri Jun 14 10:15:46 2013] Detection parameters:
  Position = (441.9, 282.6) = 18 18 46.58 -14 57 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.8 +/- 16.0
  Background counts = 69.0
  Rate = 0.001 +/- 0.0002

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 10.46'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 11.66"
[Fri Jun 14 10:16:38 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.038
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 76 for pass 0, mean size = 11.66"
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src76.ximg exists
[Fri Jun 14 10:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src76.csv
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src76_1.ximg exists
[Fri Jun 14 10:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src76.csv
[Fri Jun 14 10:16:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:41 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Fri Jun 14 10:16:41 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Fri Jun 14 10:16:41 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src76 appears to have run properly
[Fri Jun 14 10:17:30 2013] Warning: source 76 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 75 at 15.532154 pixels away
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:18:02 2013] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 11.66"
[Fri Jun 14 10:18:02 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.038
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 76 for pass 1, mean size = 11.66"
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src76.ximg exists
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src76_1.ximg exists
[Fri Jun 14 10:18:04 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src76 appears to have run properly
[Fri Jun 14 10:18:06 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Fri Jun 14 10:18:06 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Fri Jun 14 10:18:06 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src76 appears to have run properly
[Fri Jun 14 10:18:57 2013] Warning: source 76 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 75 at 15.532154 pixels away
[Fri Jun 14 10:18:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:58 2013] Assessing source extent using major
[Fri Jun 14 10:18:58 2013] Source does appear to be extended
[Fri Jun 14 10:18:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:19 2013] XMMSAS src. selection expression = ellipse(38395.349823, 24537.798767, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 12:54:19 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src75_src.reg
[Sat Jun 15 12:54:19 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (404, 245) - (479, 320)
[Sat Jun 15 12:54:20 2013] XMMSAS bgd. selection expression = annulus(38395.349823, 24537.798767, 1087.500000, 2175.000000, X, Y) && !ellipse(36862.073600, 20876.432800, 2589.728075, 323.716009, 18.450300, X, Y) && !ellipse(35288.678000, 21305.374000, 1694.416049, 1694.416049, 0.000000, X, Y)
[Sat Jun 15 12:54:20 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src75.gif
[Sat Jun 15 14:05:26 2013] Mean detx,y = (13710.06, -932.94) 
[Sat Jun 15 14:05:27 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 14:05:36 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 14:05:36 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Sat Jun 15 14:05:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Sun Jun 16 10:45:44 2013] Not generating rmf since there are only 79 counts
[Sun Jun 16 10:45:44 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:49 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:49 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src75_src_b10.pi.gz = 509.00
[Sun Jun 16 10:50:49 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src75_bgd.pi.gz = 3044.00
[Sun Jun 16 10:50:49 2013] Got source and background scale factors 1336000.000000, 11065552.000000
[Sun Jun 16 10:50:49 2013] User source parameters:
  Position = (441.9, 282.6) = 18 18 46.58 -14 57 51.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 141.5 +/- 23.6
  Background aperture counts = 367.5
  Rate = 0.002 +/- 0.0003

[Sun Jun 16 10:50:49 2013] Updating counts from extracted products
[Sun Jun 16 10:50:49 2013] Set source signif. to 141.48/19.17 = 7.38
[Sun Jun 16 10:50:55 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:55 2013] Using photon index=1.80, rate=0.00189, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src75.arf
[Sun Jun 16 10:50:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:55 2013] Updating source flux to 8.7e-14
[Sun Jun 16 10:51:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src75_pl.csv not found, spectral fit skipped or did not complete