[Fri Jun 14 10:15:45 2013] Detection parameters:
  Position = (306.4, 329.2) = 18 19 27.24 -14 54 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.8 +/- 21.5
  Background counts = 107.4
  Rate = 0.003 +/- 0.0003

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 2.30'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 7.58"
[Fri Jun 14 10:16:38 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.994
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 7.58"
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src47.ximg exists
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src47_1.ximg exists
[Fri Jun 14 10:16:39 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src47 appears to have run properly
[Fri Jun 14 10:16:41 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Fri Jun 14 10:16:41 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Fri Jun 14 10:16:41 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Fri Jun 14 10:17:29 2013] Spatial fit model total counts = 1055.940000, observed total counts = 1056.000000
[Fri Jun 14 10:17:29 2013] Offset between fit and detection position for source 69 = 0.517645 pixels
[Fri Jun 14 10:17:29 2013] 1037.375300 total counts/ 952.747000 bgd. counts: snr = 2.741743
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 0.517645 pixels
  Position = (306.3, 329.7) = 18 19 27.29 -14 54 27.5
  Extent = 3.4 (2.6-4.4)", rotation angle = 0
  Source counts = 84.6 +/- 32.2
  Background counts = 952.7
  Rate = 0.001 +/- 0.0004
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:18:02 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 3.38"
[Fri Jun 14 10:18:02 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.380
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 3.38"
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src47.ximg exists
[Fri Jun 14 10:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src47.csv
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src47_1.ximg exists
[Fri Jun 14 10:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src47.csv
[Fri Jun 14 10:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Fri Jun 14 10:18:05 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Fri Jun 14 10:18:57 2013] Spatial fit model total counts = 1016.960000, observed total counts = 1018.000000
[Fri Jun 14 10:18:57 2013] Offset between fit and detection position for source 69 = 0.012814 pixels
[Fri Jun 14 10:18:57 2013] 999.038700 total counts/ 915.811000 bgd. counts: snr = 2.750204
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 0.012814 pixels
  Position = (306.3, 329.7) = 18 19 27.29 -14 54 27.4
  Extent = 3.3 (2.6-4.4)", rotation angle = 0
  Source counts = 83.2 +/- 31.6
  Background counts = 915.8
  Rate = 0.001 +/- 0.0004
[Fri Jun 14 10:18:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:58 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:58 2013] Source does appear to be extended
[Fri Jun 14 10:18:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:18 2013] XMMSAS src. selection expression = ellipse(26596.441400, 28635.481200, 196.473006, 196.473006, 0.000000, X, Y)
[Sat Jun 15 12:54:18 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src69_src.reg
[Sat Jun 15 12:54:18 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (295, 318) - (318, 341)
[Sat Jun 15 12:54:18 2013] XMMSAS bgd. selection expression = annulus(26596.441400, 28635.481200, 327.455009, 654.910019, X, Y) && !ellipse(25434.285339, 27981.233704, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:18 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src69.gif
[Sat Jun 15 13:47:06 2013] Mean detx,y = (1714.76, -4373.81) 
[Sat Jun 15 13:47:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:47:14 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:47:14 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Sat Jun 15 13:47:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Sun Jun 16 10:17:59 2013] Not generating rmf since there are only 83 counts
[Sun Jun 16 10:17:59 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:40 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:40 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src69_src_b10.pi.gz = 142.00
[Sun Jun 16 10:50:40 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src69_bgd.pi.gz = 437.00
[Sun Jun 16 10:50:40 2013] Got source and background scale factors 123200.000000, 915200.000000
[Sun Jun 16 10:50:40 2013] User source parameters:
  Position = (306.3, 329.7) = 18 19 27.29 -14 54 27.4
  Extent = 3.3 (2.6-4.4)", rotation angle = 0
  Source aperture counts = 83.2 +/- 12.9
  Background aperture counts = 58.8
  Rate = 0.001 +/- 0.0002

[Sun Jun 16 10:50:54 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:54 2013] Using photon index=1.80, rate=0.00111, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src69.arf
[Sun Jun 16 10:50:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:54 2013] Updating source flux to 2.9e-14
[Sun Jun 16 10:51:36 2013] Source 69 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src69_pl.csv not found, spectral fit skipped or did not complete