[Fri Jun 14 10:15:45 2013] Detection parameters:
  Position = (182.1, 333.6) = 18 20 4.54 -14 54 8.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.2 +/- 16.1
  Background counts = 70.0
  Rate = 0.002 +/- 0.0003

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 8.81'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 10.83 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 10.83"
[Fri Jun 14 10:16:38 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.006
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 10.83"
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src59.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src59.csv
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src59_1.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src59.csv
[Fri Jun 14 10:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:41 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Fri Jun 14 10:16:41 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Fri Jun 14 10:16:41 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Fri Jun 14 10:17:30 2013] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 68 at 10.663250 pixels away
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:18:02 2013] Using EEF radius (= 10.83 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 10.83"
[Fri Jun 14 10:18:02 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.006
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 10.83"
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src59.ximg exists
[Fri Jun 14 10:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src59.csv
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src59_1.ximg exists
[Fri Jun 14 10:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src59.csv
[Fri Jun 14 10:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:06 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Fri Jun 14 10:18:06 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Fri Jun 14 10:18:06 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Fri Jun 14 10:18:57 2013] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 68 at 10.729566 pixels away
[Fri Jun 14 10:18:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:58 2013] Assessing source extent using major
[Fri Jun 14 10:18:58 2013] Source does appear to be extended
[Fri Jun 14 10:18:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:19 2013] XMMSAS src. selection expression = ellipse(15796.957779, 28974.530609, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 12:54:19 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src68_src.reg
[Sat Jun 15 12:54:19 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (145, 296) - (220, 371)
[Sat Jun 15 12:54:19 2013] XMMSAS bgd. selection expression = annulus(15796.957779, 28974.530609, 1087.500000, 2175.000000, X, Y) && !ellipse(17205.732254, 26999.480865, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:19 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src68.gif
[Sat Jun 15 13:51:40 2013] Mean detx,y = (-9084.81, -4070.13) 
[Sat Jun 15 13:51:41 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:51:49 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:51:49 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sat Jun 15 13:51:49 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Sun Jun 16 10:30:05 2013] Not generating rmf since there are only 86 counts
[Sun Jun 16 10:30:05 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:44 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:44 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src68_src_b10.pi.gz = 447.00
[Sun Jun 16 10:50:44 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src68_bgd.pi.gz = 3131.00
[Sun Jun 16 10:50:44 2013] Got source and background scale factors 1339200.000000, 10474380.000000
[Sun Jun 16 10:50:44 2013] User source parameters:
  Position = (182.1, 333.6) = 18 20 4.54 -14 54 8.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 46.7 +/- 22.2
  Background aperture counts = 400.3
  Rate = 0.0006 +/- 0.0003

[Sun Jun 16 10:50:44 2013] Updating counts from extracted products
[Sun Jun 16 10:50:44 2013] Set source signif. to 46.69/20.01 = 2.33
[Sun Jun 16 10:50:55 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:55 2013] Using photon index=1.80, rate=0.000623, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src68.arf
[Sun Jun 16 10:50:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:55 2013] Updating source flux to 1.7e-14
[Sun Jun 16 10:51:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src68_pl.csv not found, spectral fit skipped or did not complete